Agricultural machinery

For Walterscheid cardan shafts, groove extension 70 mm, including slide ring and retaining chain

For Walterscheid cardan shafts, groove extension 70 mm, including slide ring and retaining chain

Carrier pin suitable for Agria for attaching the cutter bar to the power tool.

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

With trailer ball pin 50mm and trailer towing hitch, anti-twist, A: 22mm, B: 661mm, C: 19mm, D: 775 mm (no StvO approval)With the Cat 1 field rail triangle you can attach attachments to your tractor /Attach tractor. The triangle has both a trailer ball pin K50 and a trailer towing hitch.The field rail triangle is twist-proof and thus prevents accidents. It is attached to both the lower links and the upper links. Lower link bolts: 22mm, upper link bolts: 19mmThe field rail triangle is delivered including bolts and linchpins.TOP price-performance ratio

hardened

Extra hardened, very wear-resistant, hardness HRC58, black burnished.

Consisting of: ~2 pieces of lower link balls with catch profile, inner 28.5 mm, outer 56 mm2 pieces of lower link balls, inner 28.5 mm, outer 56 mm1 piece top link ball, inner 25.4 mm, outer 50 mm

​Consisting of: 2 lower link balls with catch profile, inner diameter 38 mm, outer diameter 64 mm2 lower link balls, inner diameter 38 mm, outer diameter 64 mm1 upper link ball, inner diameter 32.5 mm, outer diameter 60 mm

​Consisting of: 2 lower link balls with catch profile, inner diameter 28 mm, outer diameter 64 mm2 lower link balls, inner diameter 28 mm, outer diameter 64 mm1 upper link ball, inner diameter 25.4 mm, outer diameter 60 mm

with pin and safety chain

With cotter pins and safety chain, hardened.

Extra hardened, very wear-resistant, hardness HRC58, black burnished.

d: 30 mmLength: 338 mm

Suitable for curved axleOuter diameter: 44.3mmLength: 121mm

Outer diameter: 40 mmLength: 370 mm

Suitable for straight axleDimensions: 42.44 x 48.1 x 31.95mm

Centering ring for hydraulic pumps of assembly 2 in order to be able to use them on the gearbox of assembly 3. The ring has an outer diameter of 66mm and an inner diameter (centering seat of the BG 2 hydraulic pump) of 36.5mm.

suitable for Lemken series Smaragd, Tobas

Chain screw M10x50 for chain pitch 10x31, 10x35, 10x38 11x31 and 11x35. Suitable for scratching floors from Claas, Krone and Mengele. The scraper floor screw has a strength of 8.8.

Chain sprocket/sprocket suitable for Mengele with threaded hole for worm screw

Chain sprocket/sprocket in GGG60 version for particularly heavy use. With threaded hole for worm screw.

Chain sprocket/sprocket suitable for crown for driving the scraper floor. Suitable for the scraper floor chain with dimensions of 10x31mm. The chain sprocket has 6 teeth in an open design.The hole for mounting on the drive shaft has a diameter of 40 mm with a 12 mm wide keyway. The total width of the chain sprocket is 55 mm.