Agricultural machinery

Easy installation for device triangle holder.

Grinding wheel for Gweil knife grinder.Original TYROLIT replacement grinding cup for grinding all common curved knives on loading wagons and presses. Dimensions 200 x 80 x 35 mm Grit K46 white Tyrolit No. 210314

Cutter head complete with wear plates for sliding block size 38x38mm and with centre bolt for centring the cutter head. The cutter head can be fastened with 4 screws. The hole spacing of the screws is 101.6mm and 152.4mm. The holes are designed for M8 screws.

Cutter head complete with cutter head cover for driving pin wrench size 20mm.

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian bar, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European bar.We would like to point out that Aebi and Reform have different cutter bars for this cutter head . This means that the length of the fastening screws is not sufficient. You can order a longer taper screw and knife head screw as an accessory (see also below) under the following FAIE numbers: ~ ~Taper screw M8x1x21mm, FAIE number 107996Knife head screw M8x1x20mm, FAIE -Number 107995

Cutter head cover with drive pin wrench width 20mm and total height 34.5mm - old version.

Cutter head cover with drive pin spanner width 19,5mm instead of 20mm and total height 43,5mm. This cutterhead cover can be used for advanced drift pin wear.

Cutter head cover with driving pin wrench width 20mm and total height 43,5mm.

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

Cutter head for Steyr Phantom cutter bars of the Jubilee series, Plus series and 8000 series.

Knife head loosely suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.