Agricultural machinery
All Products
Bolzen für Anbaugeräte verzinkt
Bolzen für Anbaugeräte verzinkt
Bolzen für Anbaugeräte verzinkt
Material C40
The implement triangle is a mechanical component that is used to attach an attachment to a tractor/tug or other agricultural vehicle on the three-point hydraulics with the attachment triangle. The device triangle is permanently connected to the attachment by welding. The U-profile has the dimensions 74x44x6mm and an internal dimension of 62mm.
Suitable for AEBI Type A71, A73, A81, AM9, AM20.
3-pin DIN rectangular plug (Hirschmann) for directional control valves. Rated voltage AC/DC 250V.
Dirko gray is a high-temperature silicone-based sealant. Dirko HT hardens by reacting with humidity. The hardened sealant exhibits permanently elastic behavior. The product is characterized by a very wide range of applications.Temperature resistant -60 to +315C. Tube 70 ml, nozzles, tube keyHigher tensile strength when cured.
Content: 0.07 l (€384.29 / 1 l)
Suitable for Case, Steyr and New Holland Outer diameter: 36mm Attachment diameter: 15mm Inner diameter: 10mm Height: 10mm
Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.
Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.
Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.
Suitable for Tuchel, Stramayr, with driving pin.
Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm
Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm
Whether in agriculture, municipal use or on construction sites: when it comes to cleanliness and efficiency, our brush rings are the first choice for your sweeper. Trust in original equipment manufacturer quality that can easily handle even the toughest dirt.Thanks to optimised bristle density and special arrangements, such as the proven Wave-Line wave shape, our disc brushes guarantee streak-free sweeping results and ideal dirt transport.The PP (polypropylene) bristles are the all-rounder for standard cleaning, leaves and up to medium soiling.The high-quality bristle material ensures low wear and a long service life. This significantly reduces your maintenance costs thanks to a long service life!Depending on their dimensions, our brush rings are compatible with all common brush drives and sweeper models and can be changed quickly thanks to precise manufacturing.
Disc brushes consist of an inner brush ring and plastic bristles that are attached to the ring in a radial pattern. The plastic brush ring has a drive pin so that the rotational movement of the axle can be transferred to the disc brushes. The bristles are made of smooth or corrugated polypropylene. Suitable for Tuchel, Straßmayr, with drive pin.The colour of the bristles may differ from the colour listed depending on the availability of the bristle material.
Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm
Suitable for use as a side brush on all standard sweepers.Sweeping diameter 550 mmDisc diameter 340 mmCentre bore 120 mmBore pattern diameter 145 mm, with 4 holes, each 10.5 mm in diameterThe mixed bristle assembly is arranged in 3 rows and fitted with 2.0 mm polypropylene bristles and 2.8 x 0.45 mm flat cast steel wire
Can be used as a side brush on all standard sweepers. Sweeping Ø 600 mm, disc Ø 350 mm, centring hole 120 mm, bolt circle 1 Ø 160 mm, bolt circle 2 Ø 220 mm, 3 holes each with a diameter of 10.5 mm. A sheet metal cover is screwed onto the disc brush so that the sweeping bristles cannot be pushed out of the wooden body with a smaller drive disc.
Can be used as a side brush on all standard sweepers. Sweeping Ø 600 mm, disc Ø 350 mm, centring hole 120 mm, bolt circle 1 Ø 160 mm, bolt circle 2 Ø 220 mm, 3 holes each with a diameter of 10.5 mm. A sheet metal cover is screwed onto the disc brush so that the sweeping bristles cannot be pushed out of the wooden body with a smaller drive disc.
Disc for diesel tap for Steyr: T80, T84, T86, T180 partlyItem no. 9
Unser Produktleiter
Werner Meixner
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
