Agricultural machinery

galvanized, A:40mm, B:20mm, C:10mm

Fork rod for Walterscheid pressure struts ADSST, mechanical stabilizers ASST-B and hydraulic stabilizers HGST and HVST.Fork opening width 23.7mm

This driver's seat with adjustable suspension (50–120 kg) ensures high seating comfort and reduces strain during long work shifts. The adjustable backrest, longitudinal adjustment, and durable synthetic leather surface allow for comfortable adaptation to different drivers. Technical specifications: Horizontal base plate, weight setting 50–120 kg, suspension travel: 50 mm, backrest adjustment, longitudinal adjustment 150 mm, rail spacing 328 mm, synthetic leather black, dimensions (W x H x D): 450 x 480 x 510 mm mm,Seat depth: 410 mm Advantages & Features • 50 mm travel suspension absorbs shocks and increases riding comfort on uneven surfaces • Weight adjustment from 50–120 kg allows for individual adjustment of the suspension to the rider • Adjustable backrest and 150 mm longitudinal adjustment support an ergonomic seating position Frequently Asked Questions What rider weights is the seat suitable for? The suspension can be adjusted for rider weights from 50 to 120 kg. Can the seating position be adjusted? Yes, both the backrest and the seating position can be individually adjusted. What is the rail spacing of the seat? The rail spacing is 328 mm.

For forward-reverse gear lever

Is used on all machines that release a lot of momentum when braking (mount the freewheel on the device side).Direction of rotation to the right - use for e.g. Rear PTO shaft (PTO shaft stub running clockwise) Direction of rotation left - use for e.g. Front PTO shaft (PTO shaft stub left-hand running)

Suitable for Type 116, 316 center section

Suitable for Steyr T80-180 with cleaning plates.

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

Original ESM friction plate instead of Agria 07506 suitable for finger bars from Agria, ESM and Vogel &~ Noot.

Suitable for Steyr T80-180 with cleaning plates

Suitable for Type 116, 316 center section

Particularly suitable for drives where there is a larger radial load, e.g. drive via V-belt pulley.Don't forget to order matching drive pinions for the front bearing for the hydraulic pump! You can find these on page 465 at the bottom right.

​Front bearing suitable for all oil motors with a 2-hole SAE-A connection and shaft diameter of 25 mm. These auxiliary bearings are used for higher axial loads on oil motors, e.g. due to a chain drive or V-belt drive. Two tapered roller bearings are installed in the bearing.There is an SAE-A 4-hole flange with a shaft diameter of 25 mm on the output side. The tapered roller bearings are lubricated via a grease nipple on the bearing housing.

Front bearing suitable for all oil motors with a 2-hole SAE-A connection and shaft diameter of 25 mm. These auxiliary bearings are used for higher axial loads on oil motors, e.g. due to a chain drive or V-belt drive. Two tapered roller bearings are installed in the bearing.There is an SAE-A 4-hole flange with a shaft diameter of 32 mm on the output side. The tapered roller bearings are lubricated via a grease nipple on the bearing housing.

Front crank bearing housing for driving the upper blade on Busatis and ESM double-blade mowers.

Dimension: 56x76x9mm

Length: 148mm

?The harrow tine is mounted on the seed harrow at the front, viewed in the direction of travel.

LxWxH: 120x80x56 mm, hole spacing 58 mm, suitable for e.g. Case IH, Deutz, Fiat, Ford, John Deere, MF, ...right/left

LxWxH: 120x80x135 mm, 22 slanted mounting plate, suitable for e.g. Case IH, Deutz, Fiat, Ford, John Deere, MF, ... right/left

LxWxH: 85x85x50 mm, M4 screws, hole spacing 45 mm, suitable for e.g. Case IH, John Deere, Fendt, MF, New Holland, ...right/left

suitable for MF, LxWxH: 128x68x48mm, ~Fastening: 2 screws M6, hole spacing: 45mm ?Design: left/right