Agricultural machinery

Hose coupling with cup and sealing ring suitable for the Bauer coupling system. The couplings are available in the dimensions listed with different diameters of the connecting pieces for the hose.Galvanized version.3 inch = HK 76, cup width B = 98 mm3 1/2 inch = HK 89, cup width B = 120 mm4 inch = HK 108, cup width B = 145 mm5 inch = HK 133, cup width B = 160 mm6 inch = HK 159, cup width B = 180 mm8 inch = HK 194, cup width B = 230 mm

Lever lock ring and rubber ring, galvanized.

Hose connector for compressed air hoses with external thread M16 x 1.5 and internal hose diameter 11 mm

Hose connector for compressed air hoses with external thread M16 x 1.5 and internal hose diameter 13 mm

Hose connector for compressed air hoses with external thread M22 x 1.5 and internal hose diameter 11 mm

Hose connector for compressed air hoses with external thread M22 x 1.5 and internal hose diameter 13 mm

The galvanised steel hose end piece is a practical accessory for the slurry hose. It is fitted with a lateral angle iron which protrudes from the spout. The hose end piece prevents the slurry hose from sticking to the container or pit floor. The slurry hose is fastened with wide band clamps.The total length is 370 mm. The spout is 220 mm long.

Marking arrow for identifying hose lines, arrow (alternately marked with - and +) and plastic fastening tab. Commercially available cable ties can also be used for assembly.

9 pieces, 7 patches, 1 tube of SVS solution 5 g, 1 rough paper. For bicycles, wheelbarrows, rotary haymakers,...

12 pieces, with 10 patches, 1 tube of SVS solution 10 g, 1 rough sheet. For cars, trailers,...

26 pieces, with 17 patches, 1 tube of SVS solution 25 g, 3 rough plates, 3 short valve inserts, for agricultural/construction machinery.

These valves allow an adjustable flow from the consumer to the return. If the flow rate determined by the setting is exceeded, for example in the event of a pipe burst, the valve closes immediately. The movable baffle plate is pressed onto the valve body against the built-in spring due to the increased flow forces. The valves should be installed on the consumer as soon as possible to ensure maximum safety.

Professional flat hose with a length of 20m. Inner diameter 52mm. Abrasion-resistant and stable hose for a long service life. Temperature range -30 to +80 C. Operating pressure 13 bar, burst pressure 40 bar. Complete with Storz C coupling.

Construction flat hose made of polyester braid with PU inner coating, operating pressure 10 bar. Complete with 2 Storz C couplings.

Construction flat hose with 10 bar maximum pressureInner diameter 75 mm.Complete with Storz B couplings.

High-quality flat hose in bright orange. Good abrasion resistance and long service life. Temperature range -30 to +80C. Operating pressure 13 bar, bursting pressure 40 bar, length 20m. Complete with Storz B coupling.

Stainless steel hose ties RUST FREE, version W4. All individual parts are made of stainless steel AISI 304. The edges of the wide band clamps are crimped to ensure easier installation.

Radio control with hydraulic control valve!2-channel radio control set for hydraulically driven winches, oil motors or hydraulic cylinders with 12 volt monoblock valve, the radio is pre-wired with a 7-pin vehicle plug , the solenoid valve is double-acting and has a connection for pressure continuation, technical data: 12 volts 3 amps, flow rate max. 50 L/min. Connections: 1/2?IG inlet/output and consumer<~cbht/>~1/2?AG to continue printing

Pressure force 2261 kg, tensile force 1378 kg at 180 bar, connection G 1/4, nominal pressure 250bar