Agricultural machinery

Single-acting with return spring, swiveling, lifting force at 150 bar: 8.5 tons. max. 250 bar, temperature range: -25C to +80C, dimensions A: 85mm, B: 90mm, C: 100mm, E: 430mm, P 1/2" (BSP), M: 54mm, N : 230mm, G: 8mm, stroke 230mm

Single-acting with return spring R1/2?, swiveling.Lifting force 100 bar: 5.67 t, 150 bar: 8.5 t.

With side connections R 3/8?, shaft 16 mm, max. inlet pressure 140 bar.

Connections R 1/2?, shaft 25 mm, plain bearing.

Connections R 1/2?, shaft 32 mm, plain bearing.

With side connections R 1/2?, shaft 25 mm, with tapered roller bearings.

Suitable for Case: from 01/99 CS64/64A, CS68/68A, SC75/75A, CS78/78A, CS86/86A, CS94/94ASuitable for Steyr: 540, 545, 548, 650, 658, 760, 768, 870, 1090, 1100, 1108, 8060, 8070, 8080, 8090, 8045, 8055, 8065, 8075, 8095, 8100, 811 0, 8120, 8130, 8140, 8150, 8160, 8165, 8170, 942, 948, 955, 964, 970, 975, M968, M975, 9078, 9083, 9086, 9094, M9078, M9086, M9094

Suitable for Case JXU from 01/2002: 70, 80, 90, 100, New Holland L: 65, 75, 85, 95, TL from 01/1998: 70, 80, 90, 100, Ford New Holland: 4835, 5635 , 6635, 7635Can be used instead of Case-IH, Ford, New Holland: 1931162, 84399618,1930986, 47134379, 84592273

Suitable for Deutz: D4507C, 4807C, 6007C, 6207C, 6507C, 6807C, 6907C, 7007C, 7207C, 7807C, DX80, 85, 86, 90, 92, DX110 from 01/84, DX120 from 01 /84, DX140 from 01/84, DX 160 from 01/84, DX230 from 01/84, DX3.30, 3.50, 3.60, 3.65, 3.70, 3.80, 3.90, DX4.10, 4.17A, 4.30, 4.31, 4.50 , 4.51, 4.56, 4.57A, 4.61, 4.70, 4.71, 6.05, 6.06, 6.10, 6.16, 6.30, 6.50, 7.10, 8.30, Agrostar/Agrostar DX 4.61, 4.68, 4.71, 4.78, 6.0 8, 6.11, 6.21, 6.28, 6.31, 6.38, 6.61, 6.71, 6.81, 6.88, 8.31, Agroxtra DX 3.57, 4.07, 4.17, 4.57, 6.07

Suitable for Steyr: Hydraulic steering 1200, 8080 from VG.No. 8947, 942, 948, 955, 964, 968, M968, 970, 975, M975, 9078, M9078, 9083, 9086, M9086, 9094, M9094

Suitable for Fendt: Farmer 102, 103, 104, 105, 106, 108, Farmer 200S/SA, 201, 303LS, 304LS, 305S/LS/LSA, 306S/LS/LSA, 307S/LS /LSA, 308S/LS/LSA, 309S/LS/LSA, 310LS/LSA, 311LSA, 312LSA, F250GT, F255GT, F275GT/GTF, F345GT/GTM, F360GT/GTF/GTH, F365GTA, F380GT/GTA/GTF, F390GTA , F395GTA/GHA

Suitable for Steyr: Hydro steering 8060 from 01/80, 8070, 8075, 8100, 8120, 8140, 8150, 8160, 8170

Suitable for Deutz: D2506, 3006, 4006, 4506, 5006, 5206, 5506, 6006, 6206, 6806, 7006, 7206, 8006, 9006, 10006, 13006, 16006, D4007, 4507, 4807 , 5707, 6007, 6207, 6507, 6807, 6907, 7007, 7207, 7807, D4507C, 4807C, 5207C, DX 3.50, 3.60, 3.70, Intrac 2002, 2003, 2004, 2006, 6.05, 6.30, 6.60

Suitable for Fiat, New Holland: 45-66, 45-66S, 50-66, 55-66, 55-76F, 55-86F, 55-90, 60-66, 60-76, 60-85, 60-90, 60-93, 60-94, 62-86F, 65-66, 65-90, 65-93, 65-94, 90-90, 95-55, 1180, 1280, 1380, 1580, 1880, 100-90, 110-90, 115-90, 130-90, 140-90, 160-90, 180-90, Winner F100, F120, F130

Hydraulic oil based on high-qualityselective raffinates with active ingredients to improveoxidation resistance and corrosion protection.DIN 51 524/Part 2.

Hydraulic oil based on high-qualityselective raffinates with active ingredients to improveoxidation resistance and corrosion protection.DIN 51 524/Part 2.

Hydraulic oil based on high-quality selective raffinates with active ingredients to improve oxidation resistance and corrosion protection. High viscosity index.DIN 51 524/Part 3.The hydraulic oil HVLP ISO-VG 32 is suitable for higher temperatures (up to max. 120°C) in hydraulic systems.

Hydraulic oil based on high-quality selective raffinates with active ingredients to improve oxidation resistance and corrosion protection. High viscosity index.DIN 51 524/Part 3.The hydraulic oil HVLP ISO-VG 46 is suitable for higher temperatures (up to max. 120°C) in hydraulic systems.

In glycerin bath with 1/2? radial connection.

In glycerin bath with 1/4? radial connection.

With front ring for installation in the dashboard or in a control panel. The connection with external thread is located on the back of the pressure gauge. The specification of the diameter 100mm refers to the outer housing diameter of the pressure gauge for the cutout in the dashboard or dashboard.

With front ring for installation in the dashboard or in a control panel. The connection with external thread R 1/4 inch is located on the back of the pressure gauge. The diameter 63mm refers to the outer housing diameter of the pressure gauge for the cutout in the dashboard or dashboard.

Steering pump