Skip to main content Skip to search Skip to main navigation

Agricultural machinery


Skip product gallery

Our offer

Item number 21294
Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,295.00*
Discount -24 %
Item number FA117928
Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

Average rating of 5 out of 5 stars

Item number 2549
Cooking tines without a share

Tine material 25x8.

€8.79*
Discount -13 %
Item number FA54554
Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
Discount -26 %
Item number FA107995
Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

€1.69* €2.29* (26.2% saved)
Discount -40 %
Item number FA63556
Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
Discount -5 %
Item number FA2521
Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
Discount -10 %
Item number FA2531
Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
Item number 72983
Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
Discount -31 %
Item number 47888
Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

All Products

Item number FA38578
Ironing staples

With plate hole spacing 51 mm, galvanized, 35x33 mm

€1.35*
Item number 52013
ISO connector
Type: 12B-1

€1.95*
Variants from €1.70*
Item number FA43702
Jockey wheel for car trailers, galvanized, air-ready

Without clamp holder.

€48.50*

Average rating of 4.95 out of 5 stars

Item number 43703
FAIE Jockey wheel for car trailers, galvanized, solid rubber wheel
Height (mm): 650 Stroke (mm): 230 Stützlast (kg): 250 Wheel (mm): 220 x 70 Ø tube (mm): 60

Without clamp holder.

€59.90*
Variants from €24.95*

Average rating of 4.93 out of 5 stars

Item number 62856
simol Jockey wheel with sheet steel wheel
A (mm): 380 B (mm): 500 D (mm): 1040 Stützlast (kg): 1500 Wheel (mm): 310 x 90 Ø tube (mm): 90

With semi-automatic folding process, spring locking.

€189.50*
Variants from €129.90*

Average rating of 5 out of 5 stars

Item number FA16160
simol Jockey wheel with sheet steel wheel 2000kg

Particularly stable design, can be folded by hand and locked with locking pins.

€299.00*

Average rating of 4.75 out of 5 stars

Item number FA43592
Jockey wheel with side crank, galvanized, solid rubber wheel

Without clamp holder.

€79.95*

Average rating of 5 out of 5 stars

Item number 22232
Joint eye according to DIN 648 Form N with grease nipple
D1 (mm): 123 H (mm): 34 L (mm): 149,5 L1 (mm): 88 h1 (mm): 40 Ø D (mm): 50

€57.90*
Variants from €15.50*

Average rating of 5 out of 5 stars

Item number 51718
Joint eye according to DIN 648, form C
D1 (mm): 53 D2 (mm): 27,5 D3 (mm): 4 H (mm): 16 L (mm): 64,5 L1 (mm): 38 h1 (mm): 13 Ø D (mm): 20

With lubrication hole diameter 16mm, with lubrication nipple from diameter 20mm

€11.40*
Variants from €10.50*
Item number FA55261
Joint piece for lifting fork

for Steyr Plus

€32.95*
Item number FA109835
Joint piece for Steyr Plus

Gesamtlänge: 99 mmBohrung Hubarm: ø 25 mmBohrung Hubstrebe: ø 18 mm

€49.50*
Item number FA34620
Indemar Joystick actuator

Without handle. Suitable for cable pulleys with clevis A6x10 mm, bolt 6 mm.

€129.00*

Average rating of 5 out of 5 stars

Item number FA65191
Indemar Joystick actuator with lock

Suitable for cable pulleys with clevis A6x10 mm, bolt 6 mm.

€139.00*

Average rating of 5 out of 5 stars

Item number FA34619
Indemar Joystick for operating 2 hydraulic circuits

Reinforced version with aluminum housing. Tensile/compressive force up to 45 kg. Suitable for cable pulleys with clevis A6x10 mm, bolt 6 mm.

€159.00*
Item number FA121498
Indemar Joystick handle with 9 microswitches

Ergonomically shaped handle for universal use in agriculture. Fastening with an internal thread M12x1.25mm. The cable harness is 900mm long and the individual cables have a cross section of 0.5mm. The protection class of the pushbuttons is IP 67, the handle as a unit has the protection class IP 54.The max. voltage is 0-15V and the max. current is 5A.The temperature range is from -40C to +85C.

€185.00*
Item number FA115405
Jump start button for Steyr T80

Jump start button for Steyr: T80, T84, T86, T180/aItem no. 97

€32.90*
Item number FA97955
Kabelstrang zu Steyr T180a

Passend zu Steyr T180a

€199.00*
Item number FA113103
Kabelstrang zu Steyr T188

€199.00*
Item number FA115398
Kabelstrang zu Steyr T190 spezifisch

Passend zu Steyr T190

€276.00*
Item number FA115399
Kabelstrang zu Steyr T288 spezifisch

Passend zu Steyr T288

€288.00*
Item number FA115400
Kabelstrang zu Steyr T290 spezifisch

Passend zu Steyr T290

€288.00*
Item number FA115397
Kabelstrang zu Steyr T86 spezifisch

Passend zu Steyr T86

€199.00*
NEW
Item number FA135745
Kalender Traktoren 2027

Dieser Wochenkalender zeigt 53 erstklassige Fotografien legendärer Traktoren aus vergangenen Jahrzehnten. Zu sehen sind bekannte Marken wie MAN, Porsche, Güldner, Allgaier, Schlüter, Hanomag, Fendt, Unimog, Eicher, IHC, Massey Ferguson und Deutz. Woche für Woche lädt eine beeindruckende Traktorenaufnahme zum Entdecken und Erinnern ein. Das übersichtliche Kalendarium bietet ausreichend Platz für persönliche Eintragungen und wichtige Termine. Dank der praktischen Ausstattung kann der Kalender sowohl aufgestellt als auch aufgehängt werden. Die Ringbindung und die stabile Rückenpappe sorgen für eine gute Handhabung und Standfestigkeit. Ein schöner Kalender für **Traktorenfreunde, Landtechnikfans und Liebhaber historischer Schlepper** – zum eigenen Gebrauch oder als Geschenk.

€18.90*
Discount -49 %
Item number 9947
iQparts Kante re 041884A pas.Landsberg
Version: left

€16.90* €32.90* (48.63% saved)

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.