Agricultural machinery

Length: min 475mm / max 575mm Joint width 48mm Joint bore 16mm Fork inner dimension 18.2mm Fork bore 16mm

Support load 300 kg, height 400 mm, stroke 220 mm

Our light material bucket can transport perfectly free-flowing bulk materials such as wood chips, sand, grain and commercial fertilizer. The depth of 1000mm allows for a large volume.The conical design without a central bar allows the bulk material to slide off optimally. With the different widths of the light material bucket, they can be optimally adapted to the width of the tractor/tug truck. This makes work easier when pushing snow or loading in tight spaces.The light material shovel has skids to protect the base of the shovel. The completely welded shovel made of high-quality steel with a thickness of 6 mm is protected against wear by a hardened scraper edge 500 HB. Two permanently welded perforated plates make it possible to mount all common front loaders, wheel bearings, telehandlers or yard loaders. This means that if you change the carrier vehicle later, you can change the mount without much effort.Please order the mounts according to your carrier vehicle!Steel sheet with 6 mm thickness , powder-coatedwith perforated plate holder for front, telescopic or wheel loadersconical design for better slipping of the bulk materialhardened scraper edge HB 500

LED four-function light set, with 2 pieces (indicator, tail light, brake light, license plate light) ~2 x 5 LED rows (license plate = 4 LED's), in clear glass look, housing welded waterproof, ~Dimensions approx. WxHxD: 105x100x35 mm , 12 V, can be used on the right and left side, with 2.5m intermediate cable and 7.5m connection cable, 13-pin. Plug, magnet holder, assignment according to ISO 11446 (cannot be used for 7-pin systems)

With 2 front lights (indicator, position light) and 2 rear lights (tail, brake, indicator and license plate lights), connection cable for 7.5 m, connection cable 2.5 m, 7-pin plug, including bulbs

Passend zu Massey Ferguson Serie 100

Suitable for Stabilus LIFT-O-MAT. Complete with fastening elements, end position cushioned (no damage to the hinges).This is just a small excerpt from the LIFT-O-MAT gas pressure spring program. We can supply you with the right gas pressure spring for many tractor types. Please provide us with the 6-digit Stabilus number that is printed on the gas spring.

Die-cast aluminum to protect the compressed air brake system against contamination

Linseal is not an adhesive, but a water-soluble liquid that contains rubber particles. The particles wedge themselves purely mechanically in the split rubber and, depending on the tire structure, seal punctures of up to 15 mm object diameter and also air loss between the tire and rim. Linseal is filled into the tire or tube via the valve stem.Properties:- reusable- applicable down to -25C- non-toxic- does not stick- remains liquid - washable with waterArea of application:Agriculture in general, industrial machinery, construction machinery, garden tools, wheelbarrows,... all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after.

Seals punctures of up to 15 mm object diameter and also air loss between tire and rim. Area of application: all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after, contents 25 liter canister

This thick grease spray provides long-lasting lubrication without dripping or running. It is particularly suitable for reducing the friction of metal parts and thereby keeping the connection smooth. 400ml.

Serves to adapt the pressure to the brake cylinder to the loading status of the trailer. The maximum pressure can be changed via 3 switching positions. Basic setting:max. Flow 30 L/min1. Switch position 40 bar2. Switch position 75 bar3. Switching position 110 barConnections R1/2"~ IGWe would like to point out that the load adjustment valve only forwards the preset maximum pressures in the different switching positions to the brake cylinder in conjunction with a trailer brake valve.

​Ideal for securing loads in the vehicle quickly and easily. (e.g. boot)No more luggage flying around in the trunkSimple and inexpensiveSystem can be loaded up to max. 760 kgReinforced edge cord Ø 10 mm for secure strappingSewn-on fastening straps 100 and 150 cmMaterial: polypropyleneScope of delivery: 1 net 100x120 cm (mesh size 25x25 mm), 2 snap hooks, 2 straps.One end of the strap is attached to the PES tension straps of the net using clamp locks, the other end of the strap is attached to the anchor points of the vehicle using pointed hooks

new version

long, thickness 6 mm

Thickness 5mm

Thickness 5mm

Thickness 5mm.

Thickness 5mm

Thickness 5mm

Thickness 5mm

Thickness 5 mm, suitable for Reform Muli with Steyr loading wagon body