Agricultural machinery

High quality resin machine paint, 1kg

High-quality machine paint, synthetic resin, 1l

High-quality machine paint, synthetic resin, 1l

High-quality machine paint, synthetic resin, 1l

Thread: M30x1.5

Versatile - holding force per magnet approx. 20 kg, magnet diameter 75 mm

Untermesser, 30 Klingen, davon 5 Pilzklingen 100343

Obermesser, 30 Klingen, davon 6 Pilzklingen 100346

​Fitting: right / leftVoltage: 12 voltsDesign: with metal housingDiameter: lens ø 130 mmContents: 1 pairThese main headlights for the Deutz 06 Series, featuring a metal housing, provide reliable vehicle lighting on both the right and left sides. The set is designed for 12 volts and is supplied as a pair. With a lens diameter of 130 mm, these headlights are a suitable lighting solution for the Deutz 06 Series.

12 V, H4 with marker light. Also suitable for Steyr series 80, 900 and Lindner from '99. Asymmetrical light, glass frame made of black plastic, reflector and lens glued together, lens adjustment angle +/- 4, installation opening: 145x90 mm.

Outer diameter: 130 mmPipe connection: 24 mmDesign: left

Original headlights with wiring and bulbs. Outer 160 mm, screw M18x1.5, not "~E"~ checked.

STOPPFIXX maintenance plug set "3 in 1" in red signal color for closing unpressurized lines during repairs and maintenance. Thanks to the 3 in 1 principle, the smallest plug is in the middle plug and these two are then contained in the larger maintenance plug, you always have the right diameter at hand. If the medium size M of the maintenance plugs is in use, the largest STOPPFIXX can be closed with the dust cap and the size S cannot be lost. Due to the adhesive effect, the plugs can be used continuously from 2 - 42mm!Temperature resistant from -45 to +120CSilicone-free, resistant to most oils and chemicals.

According to DIN 2353 and ISO 16028, lightweight series.

Plug, no leakage oil losses!

favorable center of gravity thanks to compact design robust thanks to thick-walled side plates and wear plate under the lower tine carrier screwable forged tines, tine length 800 mm

Fully galvanized, hydraulic connection 12L, thread M18x1.5. Single-acting, reset by maintenance-free gas spring, screw-in thread on the manure scraper M30x2.

Flange hole pattern 150x150 mm, bore 13 mm

Due to the enlarged housing to 102 cm and the resulting larger gaps in the flow area, these manure scrapers are no longer as susceptible to clogging due to solid particles (straw, hay, leftover feed, etc.) in the manure. See also heavy-duty manure scraper with threaded connection. Max. pressure 4 bar. Flange hole pattern 150 x 150 mm

Flange hole pattern 150x150 mm, bore 13 mm

Due to the enlarged housing to 102 cm and the resulting larger gaps in the flow area, these manure scrapers are no longer as susceptible to clogging due to solid particles (straw, hay, leftover feed, etc.) in the manure.

high-quality paint with intensive, permanent color and luminous pigment alcohol-based, odorless frost-proof, environmentally friendly long-term marking (3 - 6 months) high luminosity and opacity low risk of contamination free from heavy metals and silicones special spray head for overhead spraying with 360 special valve for identification in all positions shake vigorously before use spray distance approx. 10 - 20 cm dry after approx. 1 - 5 minutes (depending on the ambient temperature) Other technical properties Contents: 500ml Container: Spray can

high-quality paint with intensive, permanent color and luminous pigment alcohol-based, odorless frost-proof, environmentally friendly long-term marking (3 - 6 months) high luminosity and opacity low risk of contamination free from heavy metals and silicones special spray head for overhead spraying with 360 special valve for identification in all positions shake vigorously before use spray distance approx. 10 - 20 cm dry after approx. 1 - 5 minutes (depending on the ambient temperature) Other technical properties Contents: 500ml Container: Spray can