Agricultural machinery spare parts

Sweeping brushes & accessories

Scraper floor parts & front loader tines

Soil cultivation

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA12769

ESM Double blade 2 mm, instead of 344.1231 Double blade 2 mm, instead of 344.1231

Double blade 6-hole with 10 mm center bore. The rivet holes have a countersink on the underside.

€9.65*

#FA19106

ESM Double blade 2.5 mm instead of 344.1321 Double blade 2.5 mm instead of 344.1321

Center hole oval, lowered at the bottom

€9.65*

#FA19103

ESM Double blade 2.5 mm, instead of 344.1311 Double blade 2.5 mm, instead of 344.1311

€9.65*

Doppelherzschar 110 mm, Stärke 8 mm, Lochabstand 45 mm, anstelle Kongskilde, Kverneland und System David

#FA39234

Double disc coulter 110 mm, thickness 8 mm,hole spacing 45 mm, suitable for Kongskilde, Kverneland and System David Double disc coulter 110 mm, thickness 8 mm,hole spacing 45 mm, suitable for Kongskilde, Kverneland and System David

Double disc coulter suitable for David, Kongskilde and Kverneland spring tine cultivators. The coulter has a material thickness of 8 mm, ensuring a longer service life.

€21.90*

#FA11878

Double finger A83, 100.7834 Double finger A83, 100.7834

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

€27.90*

#FA41780

Schröckenfux Double finger Agria Double finger Agria

Agria: Suitable for 1700, 2300, 2400, 3300, 5400, 6000, BM3600.Bird &~ Noot: Suitable for Plus 1, 3, 4 middle cut.

€27.90*

#FA41784

Schröckenfux Double finger high cut LA=76 mm Double finger high cut LA=76 mm

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€35.00*

#FA41788

Schröckenfux Double finger narrow lobes GB29 Double finger narrow lobes GB29

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€23.90*

Doppelfingerplatte anstelle BCS 565.50648.0

#FA99110

Double finger plate instead of BCS 565.50648.0 Double finger plate instead of BCS 565.50648.0

Double finger plate for BCS mowers in the 94 EUROPA series. These mowers can be found on Aebi, BCS mowers in the 600 and 700 series, as well as on Reform motor mowers in the 600 and 700 series.

€21.90*

#FA7772

Double finger suitable for Rapid 22160 Double finger suitable for Rapid 22160

Double finger 22160 suitable for Gaspardo, Gutbrod, Kppl and RapidHole spacing of the mounting thread holes 51mm with M10 thread.

€21.90*

#FA7766

Schröckenfux Double finger TIROLER GB30 Double finger TIROLER GB30

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€23.90*

#FA41779

Double finger with thread A73 Double finger with thread A73

Replacement for single finger A33Suitable for AEBI Type A33, A35, A41 center cut and A71, A73, A81, AM9, AM20

€27.90*

#FA120186

Double flange elbow 90� 6 radius 195mm Double flange elbow 90� 6 radius 195mm

Pipe elbow 90 in size 6" with two flange connections. The square 4-hole flange has the dimensions 180x180mm. The hole spacing of the holes is 150x150mm and the holes have a diameter of 13mm. The double flange elbow has a radius of 195mm and a height of 285mm.

€149.00*

#FA110013

Double flange elbow 90� 6 radius 400mm Double flange elbow 90� 6 radius 400mm

€129.00*

#FA54480

Double tine for heavy cultivators Double tine for heavy cultivators

€19.90*

#105379

Drag hose end pieces Drag hose end pieces

Length (mm): 1000 Thickness (mm): 4,1 Ø inside (mm): 50

PVC suction and pressure hose with hard PVC spiral. The high rigidity (Shore hardness 85) of the hose makes it possible to precisely position the end piece on the drag hose distributor near the ground. This ensures optimal and precise spreading of the manure.

€18.00*

Variants from €10.50*

#FA27674

Drip oiler for vacuum pump Drip oiler for vacuum pump

simple, 1/4? connection.

€27.90*

#FA27675

Drip oiler for vacuum pump Drip oiler for vacuum pump

double, connection 1/4?.

€29.90*

#FA24566

Schröckenfux Driver plate Driver plate

Suitable for AEBI Type A33, A35, A41 center section.

€10.50*

#FA24565

Schröckenfux Driver plate Driver plate

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

€12.00*

#FA25693

Schröckenfux Driver plate, 372 mm Driver plate, 372 mm

€19.00*

Mitnehmerschraube lose M18x1,5 zu Messerkopf

#FA53014

ESM Driver screw loose M18x1.5 for cutter head Driver screw loose M18x1.5 for cutter head

Driver screw suitable for Aebi, Agria and Nussmller-Rasant motor mowers and cutter bar for mower blade drive with mushroom rivets on the swing arm

€11.50*

#FA51572

Driving rod wood N73FG suitable for mortar Driving rod wood N73FG suitable for mortar

Driving rod wood suitable for Mrtl cutter bars. The crank rod wood is made from local ash wood.

€59.90*

#2677

Driving rod wood suitable for Steyr Driving rod wood suitable for Steyr

A (mm): 450 B (mm): 92

€25.90*

Seite 16 von 63

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery spare parts

Drive shafts & spare parts

Mower spare parts

Teejet precision farming

Combine harvester parts

Sweeping brushes & accessories

Liquid manure

Hay tines & spare parts

Field sprayer parts

Attachments and accessories

Scraper floor parts & front loader tines

Soil cultivation

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.