Agricultural machinery spare parts

Edge guide plate suitable for cultivators Amazone/BBg Pegasus and Lemken Smaragd and Lemken Thorit

Original ESM end blade for Busatis double knife mowers. Made in Germany. Original ESM Carbodux blade.

3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm

4 inch = DN100, cup width B = 130 mm5 inch = DN120, cup width B = 150 mm6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm

Mower blade, 23 blades

Driving rod wood suitable for Mrtl cutter bars. The crank rod wood is made from local ash wood.

Driving rod wood suitable for Mrtl cutter bars. The crank rod wood is made from local ash wood.

Euro mount weldable with a left and a right plate. The hook and eye are welded onto an 8mm thick steel plate. The holder is delivered blank in order to achieve an optimal welding result. The plates must be welded all around, including the square hole at the height of the hook, with a weld seam of 6mm diameter.The maximum load is limited to 2500kg. Delivery includes 1 pair

Clearance adapter from EURO attachment on the front loader to implements with three-point attachment cat. 2. Very robust and lightweight design.The Euro adapter from Schneider makes it possible to use existing implements and implements with category 2 three-point linkage on front loaders with Euro linkage. The short upper top link, which can be used in two slots, and the lower lockable three-point hitches ensure safe handling of the tools and implements with the adapter.Load capacity 1000 kgWeight 50 kg

Exact distributor for precise distribution of nutrients. The slurry is sprayed downwards using the impact head distributor.Delivered complete with impact plate.

Exact distributor for precise distribution of nutrients. The slurry is sprayed downwards using the impact head distributor.Delivered complete with impact plate.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm

Exact distributor for precise distribution of nutrients. The slurry is sprayed downwards using the impact head distributor.Delivered complete with impact plate and sealing ring.4 inch = DN100, cup width B = 130 mm5 inch = DN120, cup width B = 150 mm6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm

Exact distributor for precise distribution of nutrients. The slurry is sprayed downwards using the impact head distributor.Delivered complete with impact plate.

For coupling front and rear implements, material fine-grain steel QSTE380 (St52-3). Frame profile 60x60x6mm, lower link brackets 20 mm wide.

Suitable for plow bodies M300, M350, U10, U13, U15, UN300, UN350, UN400, UN430, UST400, W25, W35, W300, WS13, WSU350, WS350, WY350, WS400, WY400, Y25

Heavy version suitable for Einbck, Heger, Howard, Jeitler, Kocke, Landsberg-Pttinger, Regent, Vogel &~ Noot. Hardness 48-50 HRC, radius 300 mm, working width 130 mm.

Heavy version suitable for Einbck, Heger, Howard, Jeitler, Kocke, Landsberg-Pttinger, Regent, Vogel &~ Noot. Hardness 48-50 HRC, radius 300 mm, working width 180 mm.

Simple and quick coupling and uncoupling of implements on Category 2 and 3 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 855 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 59 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame in conjunction with hydraulic actuation enables a cost-effective conversion to a fully hydraulically controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.

Simple and quick coupling and uncoupling of implements on Category 2 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg.The quick-change frame in conjunction with hydraulic actuation enables a cost-effective conversion to a fully hydraulically controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.

Simple and quick coupling and uncoupling of implements on category 2 and 3 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg. Hydraulic locking with a double-acting cylinder. Includes 1.5 m hose with connection M18x1.5/12L union nut.

Simple and quick coupling and uncoupling of implements on Category 2 front loaders. The upper mounting bolts enable individual tilt angle adjustment by repositioning. The quick-change frame also has a mechanical central locking system. Locating bolt on the front loader side 30 mm, receiving shaft on the device side 40 mm, mounting width of the front loader swing arm inside minimum 860 mm and outside max. 1120 mm, locking bolt 20 mm, total width 1159 mm, weight 60 kg. With a load center of 800 mm, the load capacity is approx. 3000 kg. The side locking can be easily converted from the right side to the left side by loosening 2 screws.The quick-change frame in conjunction with a hydraulic actuation enables a cost-effective conversion to a fully hydraulic one controlled modern loader. This opens up a wide range of new areas of application for your old front loader. With the EURO attachment you increase the impact power and expand the possible uses of your old front loader in many areas.