Agricultural machinery spare parts

Sweeping brushes & accessories

Scraper floor parts & front loader tines

Soil cultivation

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA7748

Insert for inner shoe Insert for inner shoe

€39.90*

#FA53003

Insert plate 0.2 mm instead of ESM 363.1030 Insert plate 0.2 mm instead of ESM 363.1030

0.2mm thick shim for adjusting the height of the knife holder on finger bars from Agria, ESM mowers and Vogel &~ Noot mowers.

€1.75*

#FA53004

ESM Insert sheet 0.5 mm Insert sheet 0.5 mm

Shim plate for adjusting the distance between the knife holder and the friction plate. Suitable for Aebi, Agria, Bucher, ESM, Kppl, Nussmller Rasant and Rapid.

€1.80*

#FA15496

Schröckenfux Interchangeable cutting blade Interchangeable cutting blade

€2.00*

Wechselspitzschar SSP-332OS, ohne Wechselspitze

#67590

iQparts Interchangeable point share SSP-332OS, without interchangeable point Interchangeable point share SSP-332OS, without interchangeable point

Version: right can be used instead of Rabe: 2708.2701

€54.90*

#52186

iQparts Interchangeable point share SSP-350WS Interchangeable point share SSP-350WS

Version: right can be used instead of Rabe: 2751.2201, 2751.0801

€59.90*

#41479

Frank Original Interchangeable tip Interchangeable tip

Version: left can be used instead of Kverneland: 063090

€8.39*

#16036

iQparts Interchangeable tip DW S Interchangeable tip DW S

Version: right

€11.90*

#52188

Frank Original Interchangeable tip MP-350 curved Interchangeable tip MP-350 curved

Version: right can be used instead of Rabe: 2751.0901

Suitable for shares SSP-350WS

€11.50*

#58260

Frank Original Interchangeable tip MP293 Interchangeable tip MP293

Version: left can be used instead of Rabe: 2701.1202

suitable for SchareSSP-331-OS and SSP-333-OS.

€11.50*

#38303

Frank Original Interchangeable tip MP332 Interchangeable tip MP332

Version: right can be used instead of Rabe: 2708.2801

Suitable for SchareSSP-332-OS

€10.50*

-31 %

#47888

Frank Original Interchangeable tip S1W Interchangeable tip S1W

Version: right can be used instead of Lemken: 336.5534

€15.90* €23.00* (30.87% saved)

#FA53057

ESM intermediate plate intermediate plate

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

€12.00*

#9947

iQparts Kante re 041884A pas.Landsberg Kante re 041884A pas.Landsberg

Version: left

€16.90* €32.90* (48.63% saved)

#7914

KH tine KH tine

Color: weiß can be used instead of Deutz-Fahr: 1-1040-001-501.10, 06580391

€6.99*

#FA7620

KH tine for Volto whirl turner KH tine for Volto whirl turner

Rotary hay tine for VOLTO turner built up to 1997, color red.

€6.39*

#FA25681

Schröckenfux Knife back 130 cm, with oval hole Knife back 130 cm, with oval hole

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

€37.00*

#FA25687

Schröckenfux Knife back 160 cm, with oval hole Knife back 160 cm, with oval hole

Suitable for type RM158S, 110, 111, 111S, 112, 112K, 115, 131 from 1976

€45.00*

#FA25673

Schröckenfux Knife back 5' (163cm) for 20 blades, suitable for Busatis and Steyr Knife back 5' (163cm) for 20 blades, suitable for Busatis and Steyr

Suitable for Steyr T80, T84, T86 with original Busatis or Steyr side mowers

€41.90*

#FA7539

Knife back 5', 6 mm, 20 blades Knife back 5', 6 mm, 20 blades

Suitable for Steyr T80-180 with cleaning plates

€42.90*

#FA7678

Schröckenfux Knife back for knife head N35, 1800 mm Knife back for knife head N35, 1800 mm

€45.00*

#FA25685

Schröckenfux Knife back with threaded hole 145 cm Knife back with threaded hole 145 cm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€39.90*

#FA25689

Schröckenfux Knife back with threaded hole 160cm Knife back with threaded hole 160cm

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€45.00*

#41919

Schröckenfux Knife blade 2 mm Knife blade 2 mm

Version: gezahnt

Blade N36/5g serrated, 75x58x2mm - narrow mortar blade. This type of blade was installed on the UNI-Rasant and UNI-Florett mowers.

From €1.13*

to the product

Seite 25 von 63

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery spare parts

Drive shafts & spare parts

Mower spare parts

Teejet precision farming

Combine harvester parts

Sweeping brushes & accessories

Liquid manure

Hay tines & spare parts

Field sprayer parts

Attachments and accessories

Scraper floor parts & front loader tines

Soil cultivation

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.