Agricultural machinery spare parts

Sweeping brushes & accessories

Scraper floor parts & front loader tines

Soil cultivation

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Messerklinge 3-Loch, unten versenkt, anstelle 344.0061

#FA122218

ESM Knife blade 3-hole, countersunk at the bottom, instead of 344.0061 Knife blade 3-hole, countersunk at the bottom, instead of 344.0061

Cutter blade with centre hole 10 mm suitable for ESM universal cutter bar C.

€2.92*

#FA49844

Knife Claas pass. 841.599.1 Knife Claas pass. 841.599.1

€29.90*

Messer zu CLAAS Rollant, Variant, Quadrant

#FA48751

Knife for CLAAS Rollant, Variant, Quadrant Knife for CLAAS Rollant, Variant, Quadrant

Thickness 5mm

€29.90*

Messer zu DEUTZ-FAHR MP130, RP356-0C, VICON RF130, TAARUP, Orkel GP1250

#FA37463

Knife for DEUTZ-FAHR MP130, RP356-0C, VICON RF130, TAARUP, Orkel GP1250 Knife for DEUTZ-FAHR MP130, RP356-0C, VICON RF130, TAARUP, Orkel GP1250

€29.00*

#FA99853

Knife for John Deere Knife for John Deere

Knife can be used with John Deere press instead of CC131764

€29.90*

#FA74329

Knife for JOHN DEERE Knife for JOHN DEERE

€29.90*

#FA56181

Knife for JOHN DEERE Knife for JOHN DEERE

Thickness 5 mm, model 575 from serial no. 317168

€30.90*

#FA110566

Knife for KRONE Comprima Knife for KRONE Comprima

Thickness 5mm

€30.90*

#FA55565

Knife for KRONE KR Knife for KRONE KR

long version, thickness 5 mm

€32.90*

#FA48754

Knife for MAYER Siloking Knife for MAYER Siloking

New version 1050254, thickness 5 mm

€49.90*

#FA52041

Knife for WELGER RP200 Knife for WELGER RP200

short cutting edge

€29.90*

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

Messerführungsarm oben anstelle von Busatis GB2610, 3840.062.97

#FA53053

ESM Knife guide arm at the top Knife guide arm at the top

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

€74.00*

Messerführungsarm unten anstelle Busatis GB2620, 3840.075.97

#FA53054

ESM Knife guide arm below Knife guide arm below

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

€74.00*

#FA10941

ESM Knife guide arm, top Knife guide arm, top

Suitable for BUSATIS mower Bidux 1205

€52.90*

#FA925

ESM Knife head complete Knife head complete

€119.00*

Messerkopf komplett passend zu Aebi, BCS und Reform mit gezahnter Messeraufnahme

#FA5758

FAIE Knife head completely suitable for Aebi, BCS and Reform with serrated knife holder Knife head completely suitable for Aebi, BCS and Reform with serrated knife holder

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

€75.00*

#FA7750

Knife head NY35/1 suitable for mortar Knife head NY35/1 suitable for mortar

Cutter head suitable for Mrtl Uni-Rasant mowers with hydraulic drive

€89.00*

#FA14146

Knife head screw M8x28 with 2 lugs Knife head screw M8x28 with 2 lugs

Cutter head bolt M8x28 with 2 lugs countersunk head and self-locking nut. Suitable for Agrostroj Jicin, Casorzo, Moty-Mayer, Rapid and Reform motorised mowers.

€1.49*

Messerkopfschraube M8x28mm, Ovalloch-Senkkopfschraube passend zu Bucher & Reform

#FA53126

Knife head screw M8x28mm, oval hole countersunk head screw suitable for Bucher & Reform Knife head screw M8x28mm, oval hole countersunk head screw suitable for Bucher & Reform

Oval countersunk head screw M8x28mm with self-locking nut suitable for Bucher and Reform.

€1.59*

#FA12772

ESM Knife holder Knife holder

Knife holder ESM without adjusting screw and nut

€21.90*

#FA43504

ESM Knife holder Knife holder

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

€10.50*

#FA53130

Knife holder Knife holder

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€11.50*

#FA34309

ESM Knife holder complete Knife holder complete

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

€18.79*

Seite 26 von 63

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery spare parts

Drive shafts & spare parts

Mower spare parts

Teejet precision farming

Combine harvester parts

Sweeping brushes & accessories

Liquid manure

Hay tines & spare parts

Field sprayer parts

Attachments and accessories

Scraper floor parts & front loader tines

Soil cultivation

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.