Skip to main content Skip to search Skip to main navigation
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb

Agricultural machinery spare parts


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA41342
Swath board complete Swath board complete

€419.00*
#FA11124
Swath board with rod and moment lock (N45 FK) Swath board with rod and moment lock (N45 FK)

€369.00*
#FA55058
ESM Swath plate left with fixing screw Swath plate left with fixing screw

​Swath plate left for motorised mower with outer shoe. The swath plate is supplied complete with the fastening material.Suitable for Agria, ESM, Köppl and Nussmüller Rasant finger bars.

€82.90*
#FA3531
Swath plate on the left Swath plate on the left

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

€75.00*
#FA55060
ESM Swath plate right with fixing screw Swath plate right with fixing screw

​Swath plate right for motorised mower with outer shoe. The swath plate is supplied complete with the fastening material.Suitable for Agria, ESM, Köppl and Nussmüller Rasant finger bars.

€82.90*
#FA75401
Swath rotary tine Eurotop Swath rotary tine Eurotop

€7.49*
#FA10967
Swath rotor tine on the left Swath rotor tine on the left

€8.25*
#67660
Sweeper roller with mixing trim Sweeper roller with mixing trim
Color: weiß Square (mm): 51 Trimming: 0,7 / 1,7 x 3 Width (mm): 900 Ø outside (mm): 51

Suitable for Bema, Binderberger, Saphir, Tuchel and many other sweepers. Trim: 0.7 / 1.7x3 = mixed trim e.g. with corrugated wire 0.7mm and polypropylene 1.7x3mm.

€223.00*
Variants from â‚¬169.00*
#114525
Sweeping roller with polypropylene trim Sweeping roller with polypropylene trim
Color: weiß Square (mm): 46 Trimming: PPN 1,6 x 1,8 Width (mm): 600 Ø outside (mm): 400

Suitable for Bema, Binderberger, Saphir, Tuchel and many other sweepers. Trim: PPN 1.7x3 = polypropylene trim with fiber thickness 1.7x3mm.

€129.00*
Variants from â‚¬119.00*
#FA104286
ESM Swing bolt 267.0670 cpl. to Busatis/ESM Swing bolt 267.0670 cpl. to Busatis/ESM

Swing bolt complete for Busatis/ESM double knife mowers with horizontal swing arm drive.The swing bolt is screwed onto the rocker arms. By connecting the bearing housings to the drive, the rocker arms are moved forwards and backwards. This results in the upper knife moving in opposite directions to the lower knife and this ensures a clean cut.

€69.00*
#FA79158
Schneider SWR hydraulic locking conversion kit SWR hydraulic locking conversion kit

For converting the mechanical locking to a hydraulic locking of the implements with a double-acting cylinder. Including 1.5 m hose, connection M18x1.5/12L union nut.In conjunction with guide no. 103099 (see accessories) you can attach this conversion kit to any quick-change frame. The installation length L(min) is 714mm. With the stroke of 150mm, the maximum length L(max) is 864mm. The locking bolt has a diameter of 20mm.We would like to point out that the hydraulic control circuit for the locking cylinder has a flow rate of 10-15L/min. and the maximum pressure should be limited to 160bar.

€215.00*
#53297
System at the front System at the front
Version: right can be used instead of Regent: 1600611-1, 1650117-1

€45.90*
#53289
iQparts System at the front System at the front
Version: right can be used instead of Regent: 1600111-1, 1600118-1

€37.90*
#78271
iQparts System front part System front part
Version: left

Suitable for bird &~ Noot plow body M350, MPK400, MPK430, UL430, ULST430, UN300, UN350, UN400, UN430, UST400, WL430, WL430 PLUS, WS350, WS400, WX400 PLUS, WY350, WY400, WY400 PLUS

€39.00*
#45304
iQparts System front part AK10 System front part AK10
Version: left can be used instead of Lemken: 340.1901

Suitable for plow bodies B, C, BS40, BS42, US35, US40

€14.90*
#8748
iQparts System long System long
Version: left

€56.00*
#53261
Frank Original System long at the back System long at the back
Version: left can be used instead of Kverneland: 063604

€23.90* €45.00* (46.89% saved)
#FA32130
Frank Original System long instead of Kverneland 073609 System long instead of Kverneland 073609

Can be used right and left

€52.90*
#53259
Frank Original System short at the front System short at the front
Version: left can be used instead of Kverneland: 063606

€19.90* €32.90* (39.51% saved)
#FA32129
iQparts System short instead of Kverneland 073608 System short instead of Kverneland 073608

Can be used right and left

€47.90*
#FA7983
T-head screw too rough T-head screw too rough

M10x65.

€1.75*
#FA27246
Tedder tine 'HIT' Tedder tine 'HIT'

€6.95*
#FA7830
Tedder tine 'HIT' Tedder tine 'HIT'

€7.19*
#FA55494
Tedder tine 'Speed' Tedder tine 'Speed'

Tedder tine suitable for Stoll "~Speed"~

€7.95*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.