Hydraulic program

Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 30 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 1272 kg at 180 bar, connection M16x1.5, T = 38 nominal pressure 250bar.

Single-acting hydraulic cylinder (plunger cylinder) with Ø20 mm ball joints. The piston rod has a diameter of 40 mm and is equipped with an extension lock at the lower end. The ball joints have a grease nipple for lubricating the joint.Pressure force 2260 kg at 180 bar, connection M18x1.5, T = 38 mm, nominal pressure 250bar.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump - FAIE control valve with pressure transfer - additional control unit - hoist.

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:1 piece pressure gauge 63mm 0-250bar, graduation 10bar1 piece pressure gauge 63mm 0-600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece pressure gauge direct connection with Minimess screw coupling1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread M10x1 AG with O-ring1 piece thread reduction 1/4?AG / M10x1 IT1 piece thread reduction 3/8?AG / M10x1 IT1 piece thread reduction 1/2?AG / M10x1 IT

For measuring hydraulic pressures between 0 and 600bar. With extensive accessories so that you can carry out a measurement in any installation situation.Contents:2 pieces of pressure gauge 63mm 0 - 60bar, graduation 1bar2 pieces of pressure gauge 63mm 0 - 250bar, graduation 10bar2 pieces of pressure gauge 63mm 0 - 600bar, graduation 10bar1 piece mini measuring hose 2m with measuring connection M16x2 and pressure gauge connection 1/4? internal thread1 piece mini measuring hose 2m with measuring connection M16x21 piece pressure gauge connection for mini measuring hose 1 piece pressure gauge connection with Minimess screw coupling1 piece pressure gauge connection with union nut 12L (M18x1.5mm IT)1 piece test connection M16x2 / screw-in thread 1/8?AG1 piece test connection M16x2 / screw-in thread 1 /4?AG1 piece test connection M16x2 / screw-in thread 1/2?AG1 piece thread reduction 3/8?AG / 1/4?IG1 piece thread reduction 1/2?AG / 3/8?IG

This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat.

This valve is suitable for overpressure protection in hydraulic systems. The pressure relief valve is a directly controlled valve with a cone seat. This version is equipped with a 1/4" pressure gauge connection.

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump FAIE control valve with pressure transfer-auxiliary control unit-hoist.for control valves BM/BF40, GM08, R 1/2?

Serves for pressure transfer if several control valves are installed in the hydraulic circuit, e.g. pump FAIE control valve with pressure transfer-auxiliary control unit-hoist.for control valves BM/BF70, BM100, R 3/4"

Internal thread R1/2"~

Internal thread R1/2?

Bore 22 mm.

For attaching to oil engines. Bore 25 mm, keyway 8mm, outer 49 mm, length 130 mm.

Bore 22 mm. Total length 100mm.

For attaching to oil engines. Bore diameter 25 mm, keyway 8 mm.

Used to attach the hydraulic pumps to the electric motor. Material: aluminum

Connecting hub between hydraulic pump and gearbox or hydraulic pump and outer bearing.

With O-ring seal. For screwing directly onto Bosch additional control units SB23. Suitable for all tractor types with Bosch SB23 control units e.g. Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor.Can be coupled under pressure!

For the additional installation of a ring eye with an inner diameter of 22 mm. The total length of the coupling including the connecting piece for the ring eye and the screw-in thread is 134.80mm.Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!

​Push-pull plug-in coupling suitable for Fendt SCR, S4 and Gen6 series.Length (without thread) L: 80 mmL1: 30 mmBulkhead thread 15LSize: BG 3Standard designation: ISO 7241-1 A

Push-pull plug-in coupling suitable for Fendt with collar and O-ring groove for attaching the Fendt original oil leak housing.​Length (without thread): 110mmExternal thread: M22x1.5 bulkhead thread 15L Size: BG 3Standard designation: ISO 7241-1 A

​The pushbutton is a normally open contact. This means that when the pushbutton is pressed, the circuit is closed and current can flow in the working circuit. The pushbutton has an installation thread M12x0.75mm. The maximum switching capacity is 8 A.Suitable for Faie handles no. 34623, 34624, 34625 and 22800

Oil-resistant PVC hose with an inner diameter of 8mm for leakage oil collection systems. Price unit is 1 meter.