Control valve 70l single

With notch in lifting and hydraulic limit switch.Specially for use in log splitters. With basic position in lifting for mechanical limit switch. The auto-speed function reacts to the different splitting pressure and switches the splitting speed independently. During the idle stroke, the valve switches to the maximum speed possible due to the pump performance. During the splitting process, the valve automatically switches to the highest possible pressure. This results in the maximum splitting force. If the piece of wood has already been split, the splitting force is reduced and the valve automatically switches back to maximum speed. Technical data:max. Flow 60 L/minwith auto-speed function max. flow at connection A 100 L/minauto-speed function 70 barmax. Pressure preset 200 barNo pressure transfer possible! This valve should be the last one.

With basic position in lifting and with actuating pin for mechanical limit switch.Specially for use in log splitters. With basic position in lifting for mechanical limit switch. The auto-speed function reacts to the different splitting pressure and switches the splitting speed independently. During the idle stroke, the valve switches to the maximum speed possible due to the pump performance. During the splitting process, the valve automatically switches to the highest possible pressure. This results in the maximum splitting force. If the piece of wood has already been split, the splitting force is reduced and the valve automatically switches back to maximum speed. Technical data:max. Flow 60 L/minwith auto-speed function max. flow at connection A 100 L/minauto-speed function 70 barmax. Pressure preset 200 barNo pressure transfer possible! This valve should be the last one.

with catch in liftingSpecially for use in log splitters. With catch in lifting for mechanical limit switch. The auto-speed function reacts to the different splitting pressure and switches the splitting speed independently. During the idle stroke, the valve switches to the maximum speed possible due to the pump performance. During the splitting process, the valve automatically switches to the highest possible pressure. This results in the maximum splitting force. If the piece of wood has already been split, the splitting force is reduced and the valve automatically switches back to maximum speed. Technical data:max. Flow 60 L/minwith auto-speed function max. flow at connection A 100 L/minauto-speed function 70 barmax. Pressure preset 200 barNo pressure transfer possible! This valve should be the last one.

With mechanical limit switchMechanical actuation with spring return in standard version. The middle position is designed with a pressureless circulation and the ports A, B, P, T are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides. Standard version of the valves in parallel connection.Version: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lower, SW=Floating position, ELG=Rapid traverse, R=with detent.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: ~ R3/4?H=raise basic position, 0=middle position, S=lower, ELG=rapid traverse.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: ~ R3/4?HR=Raise locked, 0=Middle position, S=Lowering, ELG=Rapid traverse.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lowering, SW-R=Floating position locked.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H=Raise, 0=Middle position, S=Lowering, SW=Floating position, ELG=Rapid traverse, R=with detent.The switching positions listed depend on the respective model of the control valve .

Electromagnetic actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?HR=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.

Mechanische Betätigung mit Federrückstellung in Standardausführung. Die Mittelstellung ist mit einem drucklosen Umlauf ausgeführt und die Anschlüsse A & B sind gesperrt. Druckbegrenzungsventil am Anschluss P (Pumpe). Negative Überdeckung der Schieber.Standardausführung der Ventile in Parallelschaltung.Ausführung: BM70Durchfluss max.: 80L/minBetriebsdruck: 250 barmax. Druck: 320 barÜberdruckventil eingestellt: 140 bar, einstellbar von 100-250 barEinschraubgewinde A, B, P, T,: R1/2″Einschraubgewinde P2, T2: R3/4″H-R=Heben gerastet, 0=Mittelstellung, S=Senken.Die angeführten Schaltstellungen sind vom jeweiligen Modell des Steuerventils abhängig.

Mechanische Betätigung mit Federrückstellung in Standardausführung. Die Mittelstellung ist mit einem drucklosen Umlauf ausgeführt und die Anschlüsse A & B sind mit dem Tank verbunden. Druckbegrenzungsventil am Anschluss P (Pumpe). Negative Überdeckung der Schieber.Standardausführung der Ventile in Parallelschaltung.Ausführung: BM70Durchfluss max.: 80L/minBetriebsdruck: 250 barmax. Druck: 320 barÜberdruckventil eingestellt: 140 bar, einstellbar von 100-250 barEinschraubgewinde A, B, P, T,: R1/2″Einschraubgewinde P2, T2: R3/4″H-R=Heben gerastet, SW=Mittelstellung - Schwimmstellung, S-R=Senken gerastet.Die angeführten Schaltstellungen sind vom jeweiligen Modell des Steuerventils abhängig.