Couplings, ball valves,

The FASTER leak oil container with a capacity of 0.3 litres is attached directly under the last push-pull coupling using the tensioning strap. The supplied seal is fitted between the drain connection of the leakage oil housing and the oil container so that no dirt can penetrate at this point. The drainage oil from the couplings runs into the drainage oil container underneath via the straight drain connection on the FASTER drainage oil housing.

Leak oil container complete with clamp and 1 piece Y-hose connector.Dimensions container Height: 120mm (with screw cap 150mm) Width: 65mm Depth: 100mm

Faster leakage oil drain housing TARV with different hole spacings with dust caps. The leakage oil drain connection is designed at 45. Colored markings can be ordered separately. You can find these under color clip.

Faster leak oil drain housing TARV-3 with dust caps. The distance between the coupling sleeves is 72mm. The leakage oil drain connection is designed at 90.

According to DIN 2353 and ISO 16028, lightweight series.

Plug, no leakage oil losses!

Automated workflows in manufacturing, testing, controlling and regulating require the highest precision. This is where our multi-coupling 4-way set comes into play: It allows you to effortlessly connect several oil hydraulic lines at the same time. The fixed arrangement of the coupling elements eliminates confusion and the duration of the coupling process is shortened enormously. There are neither fluid losses nor air inclusions during the coupling and uncoupling phases, even when ~ Presence of pressure. Incorrect connections are virtually impossible.The 4-way multi-coupling set is used here:Hydraulic equipment for agricultural machinesHydraulic equipment for forestry machinesHydraulic equipment for conveyor machinesHydraulic equipment for commercial vehiclesComponents on test benches for hydraulic systemsCooling or heating when molding plastic and metal< li>Hydraulic systems in industrial applicationsHydraulic systems for special transport vehicles ~Scope of delivery / technical data:Complete with fixed and loose parts Assembly 2, DN10Pressure max. 350 barFlow 45 L/minConnection R1/2"

Faster multi-coupler mobile part with 2 hydraulic connections 15L, external thread M22 x 1.5. The maximum flow rate is 40 L/min.

With 2 hydraulic connections, flow max. 40 l/min, max. pressure 250 bar, hydraulic connection G1/2"~ IG

Faster multi-coupler fixed part with 2 hydraulic connections 15L, external thread M22 x 1.5. The maximum flow rate is 40 L/min.

Can be coupled under pressure.

Can be coupled under pressure.

Can be coupled under pressure.

With 2 hydraulic connections, flow max. 70 l/min., max. pressure 250 bar, hydraulic connection G1/2"~ IG, with dust cap

With 4 hydraulic connections and 1 3-pin electric coupling. Hydraulic connection G1/2?IG

With 4 hydraulic connections and 1 3-pin electric coupling. Hydraulic connection M22x1.5 AG 15L

With 4 hydraulic connections, flow rate max. 40 l/min, max. pressure 250 bar, hydraulic connection M22x1.5 AG 15L

With 4 hydraulic connections, flow rate max. 40 l/min, max. pressure 250 bar,Hydraulic connection G1/2?IG

The multi-coupling PSF from dnp was developed to enable coupling under residual pressure on the tool side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200bar! The special seals on the connectors are designed for this application.The hydraulic lines are connected via flat-sealing coupling elements through which several hydraulic lines can be connected or separated within a very short time. This is done with an operating lever whose guide link is designed in such a way that the operating forces are kept as low as necessary.The outstanding features of the multi-coupling are the security of connections, quick connection, ability to couple under residual pressure and optimally minimized leakage during the coupling process. Another advantage is the interchangeability with the Faster multi-coupling P206. Not only are the two halves of the multi-coupler with Faster P206 interchangeable, but also the plugs and sockets.Assembly 2/DN10Pressure max. 250 barFlow rate max. 46 l/minConnection R1 /2?IG

The multi-coupling PSF from dnp was developed to enable coupling under residual pressure on the tool side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200bar! The special seals on the connectors are designed for this application.The hydraulic lines are connected via flat-sealing coupling elements through which several hydraulic lines can be connected or separated within a very short time. This is done with an operating lever whose guide link is designed in such a way that the operating forces are kept as low as necessary.The outstanding features of the multi-coupling are the security of connections, quick connection, ability to couple under residual pressure and optimally minimized leakage during the coupling process. Another advantage is the interchangeability with the Faster multi-coupling P206. Not only are the two halves of the multi-coupler with Faster P206 interchangeable, but also the plugs and sockets.Assembly 2/DN10Pressure max. 250 barFlow rate max. 46 l/minConnection R1 /2?IG

The multi-coupling PSF from dnp was developed to enable coupling under residual pressure on the tool side. The coupling plugs allow the hydraulic lines to be connected up to a pressure of 200bar! The special seals on the connectors are designed for this application.The hydraulic lines are connected via flat-sealing coupling elements through which several hydraulic lines can be connected or separated within a very short time. This is done with an operating lever whose guide link is designed in such a way that the operating forces are kept as low as necessary.The outstanding features of the multi-coupling are the security of connections, quick connection, ability to couple under residual pressure and optimally minimized leakage during the coupling process. Another advantage is the interchangeability with the Faster multi-coupling P206. Not only are the two halves of the multi-coupler with Faster P206 interchangeable, but also the plugs and sockets.Assembly 2/DN10Pressure max. 250 barFlow rate max. 46 l/minConnection M18x1 ,5