Ball valves & stroke limiters

3-way changeover ball valve with external thread, heavy series, L-bore

According to DIN 2353, for pipe connection, with L-hole

3-way changeover ball valve with external thread, light series, L-bore

According to DIN 2353, for pipe connection, with L-hole

3-way changeover tap with internal thread

According to DIN/ISO 228, with L-hole

4/3-way valve mechanically reversible, centre position closed, for pipework installation

​The manually operated 4/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control a double-acting hydraulic consumer such as a double-acting hydraulic cylinder. The 4/3-way valve enables the oil flow to be switched from port A to port B.In the centre position, all connections are closed. In this switching position, the flow through the valve is blocked.

6/2-way valve, mechanically reversible, flow rate 120 l/min, R3/4 Zoll, centre position closed, for pipework installation

​The manually operated 6/2-way changeover valve DEV has the function of a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied by the upstream control unit, which retains all control functions.In the centre position, all connections are closed.

6/2-way valve, mechanically switchable, closend center, for pipe installation

​The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, all connections are closed.

6/2-way valve, mechanically switchable, open center, for pipe installation

The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, connections P, A and B are connected. The connections P1, A1 and B1 are also connected.

8/3-way valve mechanically reversible, centre position open, for pipework installation

​The manually operated 8/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control 2 double-acting hydraulic consumers, e.g. two double-acting hydraulic cylinders. The 8/3-way valve enables the oil flow to be switched from port A to port B and port A1 to port B1.In the centre position, all connections are connected to each other.

Block ball valve with external thread, heavy series

Block ball valve with external thread, light series

According to DIN 2353, for pipe connection.

Block ball valve with internal thread

According to DIN/ISO228.

Handle cranked

Offset handle made of die-cast zinc in natural color. Eg, for ball valves or changeover valves with a square shaft extension.

Handle straight

Red anodized aluminum handle. Eg, for ball valves or changeover valves with a square shaft extension.

Stroke limiter

Stroke limitation of single-acting hydraulic cylinders before the end of the stroke. E.g.: tipping cylinders of truck bodies and agricultural. followers.