Telescopic cylinder
#FA33183
Articulated drawbar cylinder suitable for Mengele
Sale and shipment by: FAIE Handels GmbH
Piston rod 90 mm, internal thread M36x4, bore bolt 30.2 mm, connection R1/2?IG.For subsequent installation or for cost-effective repairs. These articulated cylinders are installed using the spindle halves already present in the loading wagon.
#110364
Articulated drawbar cylinder suitable for P�ttinger/Landsberg
Version:
right
Sale and shipment by: FAIE Handels GmbH
For subsequent installation or for cost-effective repairs. These articulated cylinders are installed with the spindle halves already present in the loading wagon.Piston rod 60 mm, internal thread M24x3, bore bolt 25.25 mm, connection M14x1.5 ITPlease note when ordering the design of the cylinders in left and right!The photo shows an articulated drawbar cylinder on the left.
Variants from €339.00*
#FA22266
Hydraulically adjustable side brace
Sale and shipment by: FAIE Handels GmbH
Affordable hydraulic lower link adjustment for easy self-assembly. On slopes or tight curves, the entire three-point linkage can be moved laterally by up to 270 mm (depending on the tractor type) while driving. This means that, for example, when mowing on slopes, the incorrect cut, whether mowed twice or not mowed, can be compensated for by the mower drifting away. This investment is worth it with the first use.With M30x3.5mm internal thread in the piston rod for use on most tractors/trailers.Stroke 100 mm, installation length 345 mm, ball eye inner diameter 25.4 mm, outer cylinder diameter 105 mm, piston rod diameter 50 mm, hydraulic connections G1/2".Scope of delivery: hydraulic side brace as shown.Assembly: connect to a double-acting control valve with 2 hose lines.
%
#19904
Telescopic cylinder with 2 stages and cross bore, without cardan ring, max. nominal pressure 200 bar
A (mm):
30
|
B (mm):
165
|
C (mm):
120
|
D (mm):
25
|
E (mm):
114
|
F (mm):
400
|
G (Divers):
95 mm
|
Lifting force at 200 bar level 1 (t):
5
|
Lifting force at 200 bar level 2 (t):
8,8 t
|
M (mm):
45
|
N (mm):
53,5
|
O (mm):
25
|
Q (mm):
30,5
|
W (mm):
25
|
max. load (t):
5
|
t (mm):
30
|
Ø stage 1 (mm):
60
|
Ø stage 2 (mm):
75
Sale and shipment by: FAIE Handels GmbH
Weber telescopic cylinders in 2-stage design with cross bore and without cardan ring. The telescopic cylinders can be supplied in various lifting heights and cylinder stages.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.