Sieves

​All-plastic honey sump can hold approx. 35 kg of honey. Fits under almost all honey extractors and is placed directly under the extractor outlet.Accelerates the clarification of the honey through three chambers. Fine, light particles float up and the heavy ones settle. As an additional clarification stage, the drain tap is connected to a movable pipe that reaches almost to the bottom of the tank. A second tap located at the bottom is required to empty the tank. Easy and functional handling, simple cleaning thanks to removable separators.As the honey sump is relatively small, compact and made entirely of plastic, the honey does not cool down so quickly. This means that a very good clarification result is achieved even without heating at the appropriate ambient temperature.Tank size approx. 42 x 31 x 22 cm deepDrain tap and flow tap 1 ½ inches each

Mesh size at the top: 1.2mmMesh size at the bottom: 0.6mm 23cm

Double sieve made entirely of stainless steel. Thanks to the adjustable frame, which can be extended up to 40cm, it can be combined with many honey pots.It consists of two sieves, of which the coarser one has a mesh size of 1mm and the finer one has a mesh size of 0.7mm.So both can be used Larger as well as smaller wax particles or other contaminants can be filtered out. ~Frame extendable to 40cmMesh size at the top: 1mmMesh size at the bottom: 0.7mmDiameter: 23cm

​Large double sieve made entirely of stainless steel. It can be combined with many honey pots thanks to the adjustable frame that can be extended up to 47 cm.It consists of two interlocking sieves, the coarser of which has a mesh size of 2 mm and the finer a mesh size of 0.4 mm.This means that both larger and smaller wax particles or other impurities can be filtered out. Frame extendable to 47 cmTop mesh size: 2 mmMesh size at the bottom: 0.4 mmØ 31.5 cmPractical stand included in the scope of delivery!

​Fine stainless steel honey strainer with three holders, ideal for placing on round containers. Can be used up to a container diameter of approx. 40 cm.Mesh size: 0.7 mmSieve without holder: Ø 23 cmHanging bracket: approx. 11 cm

Cheesecloth according to master beekeeper Schundau.Finest sieve fabric made of 100% Polyester. Honey should be pre-sieved and very liquid so that the cloth does not clog too quickly. Not suitable for tumble drying; air dry only.Care instructions:Hand wash at max. 30°C recommended.

Conical, very fine sieve made of nylon with a mesh size of 0.095mm. 35cm

Helpful holder for single sieve. This holder has an internal diameter of 23cm. It is suitable for the most common buckets up to an upper outer diameter of approx. 42cm.Finish: Stainless steelWire diameter: 5mm

Single sieve made entirely of stainless steel with a diameter of 22.5 cm.  Ideally suited as a pre-screen for filtering coarser particles.Strainer holder as optional accessory - please order separately!

Tripod for pointed screens with a diameter of at least 35cm.

Uncapping wax bag made of nylon for separating honey from the cap or frame wax.The bag can be hung in the honey extractor.