Hand adb, schmier, univ.pumpen

Ideal for universal use. Universal pump with approx. 40 l/min. Output at 3400 rpm. Delivery height max. 20m Hose connection 3/4"Self-priming after filling

The new benchmark as a crank pumpSolid construction for professional operationHousing made of stainless steel and technopolymerBarrel adapter with connection thread S56x4Multi-part suction pipe 1 m , can be shortened individuallyPVC dispensing hose 3 mStainless steel outlet pipe 19 mm with protective capFlow rate 0.38 l/stroke

Output 50 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, connection 3/4" male thread, self-priming. Not suitable for aggressive liquids and diesel .

Output 45 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, hose connection 15 mm suitable for 1/2"~ Hose, self-priming.

Self-priming pump suitable for every drill.Power 25 L/min., suction height 4 m, pressure 5 bar, speed maximum 2600 rpm, temperature suitability max. 50C, clamping shaft 6 mm, hose connection 15 mm suitable for 1 /2?hose

Practical flow meter for urea AUS32. With 180 rotatable digital display and a delivery rate of 10-150 liters per minute. With four-digit display plus two decimal places. With 1 inch internal thread on both sides for connection. Suitable for urea (AUS32, AdBlue) and water. The counter shows the capacity of the battery at the touch of a button, liter and galleon display can be switched.Technical data: Flow min /max: 10 /150 l/min Maximum pressure: 3.5bar Max. temperature +/-: -10C - +60C Degree of protection: IP55 Not for gas, Suitable for alcohol, petrol or diesel!

Self-priming (when filled) electric pump, pump made of food-safe stainless steel. with VITON seal for hot liquids up to max. 95C, motor 340 watts / 230 volts, 2800 rpm, delivery rate max. 1700 l/h, delivery height max. 25 m ~ (2.5 bar), suction height max. 6 Meter, hose connection ", rocker switch can be used in both directions, connection cable 1.5m

Practical universal pump for transferring liquids such as water, diesel, antifreeze, etc. The ball means that no manual suction of the pumped liquid is necessary.Hose diameter inside 12mm, outside 17mm. Not suitable for gasoline, urea or other flammable liquidsHow it works:Hang the suction head in the higher liquid level, hold the other end of the hose in a low container.Use the suction head quickly a few times and move down the pumped liquid automatically begins to flow through the hose

Contents 0.5 L with hose for filling and emptying all kinds of liquids.

Made of PVC including suction and delivery hose (each 600 mm long). Piston rod made of stainless steel, valves and connections made of aluminum, ensuring a long service life. Suitable for mineral, synthetic and biological oils, as well as diesel, heating oil, antifreeze, glycerin and water. The cuff ensures safe suction of liquids.

Centrifugal pump with brass fins and reduction gear. DC motor with connecting cable and crocodile clips for 12 V batteries. Ideal for extracting engine oil (oil changes), but also pumps small amounts of diesel and heating oil. Delivery rate max. 5 l/min, complete.

The handy pump allows you to easily transfer or pump out all kinds of liquids, such as petrol, oil, water, etc. Can also be used as an air pump with the accessories supplied.

​Practical hand pump with 2" fine thread suitable for most 60/200L drums and various tanks. This self-priming pump pumps water, lubricants, oils, diesel, antifreeze etc. Not suitable forGasoline or concentrated acids or aggressive liquids. Delivery rate approx. 0.50 l p.stroke. Complete with telescopic suction pipe up to 98cm and 2m discharge hose. Simple pump for occasional use.