Electric diesel pumps

​Electrically driven centrifugal pump 12 VDC or 18 VDC with CAS battery system for diesel, heating oil, AdBlue® urea solution and water as a submersible pumpThe centrifugal pump with DC motor is intended for pumping the following liquids in compliance with the operating conditions specified in section 3.3:Liquids with flash point > 55 °C and viscosity < 20 cSt, e.g.- diesel fuel- biodiesel- EL heating oil- Urea solution AUS 32 (AdBlue®)- waterAny other or additional use is not intended.Technical data: Pump 12 VDC Pump 18 VDCVoltage: 12 VDC +/- 10% 18 VDC +/- 10%Fuse: 25 A -Power: 220 W 220 WCurrent consumption in normal operation: 16 A 12 ACurrent consumption with closed dispensing valve: 18 A 13.5 AProtection class: IP 68 IP 68Power supply: via battery or power supply unit with safety transformer via CAS batteryHydraulic data(with water, 20°C)Delivery pressure: max. 1.1 barZero flow rate: 40 l/minDelivery rate under nominal conditions: approx. 25 l/minOperating conditionsTemperature range: - 20 °C to + 60 °CDimensions and weightDiameter: 56 mmLength: 185 mmWeight: 0.65 k

Cost-effective universal pump for diesel/biodiesel, Ad/Blue (separate tap required) or water. The submersible pump can simply be inserted into the bunghole of a 200 l barrel or similar. The standard bunghole adapter ensures a clean and tight connection. Ideal for containers with 2?BSP and S70x6 thread but can also be used universally for other containers.Complete set with pump, 4m hose, 4m cable with switch and pole pliers as well as automatic nozzle for diesel. Technical data: performance. approx. 30 L/min, external dimensions of the pump 160x56mm (LxD.

Compact 12 V diesel pump with max. 40 l/min output. Weight only 3.6 kg, connections 3/4? female, self-priming up to 2 m, maximum pressure 1.3 bar. Complete with connection cable (1.8 meters) and battery terminals.

Self-priming diesel pump with bypass valve, with 60L/min output. Motor 550Watt/230 Volt 2800 rpm. Complete with switch, cable and plug, but without accessories.

​Self-priming diesel pump with bypass valve and a flow rate of 72 L/min.Motor: 750 watts / 230 volts, 1400 rpm. Complete with switch, cable, and plug, but without accessories.Threaded connection: 1 inch

Compact 12 volt diesel pump with max. 40 liters / min. Perfomance. Weight only 3.6 kg, self-priming (after initial filling) up to 2 meters, maximum pressure 1.3 bar. Complete with 1.8 meter connection cable, 2 meter suction hose, 2 meter outlet hose, all 3/4? fittings, suction filter and a manual nozzle. Ideal for refueling vehicles.

Compact 12 volt diesel pump with max. 40 liters / min. Perfomance. Weight only 3.6 kg, self-priming (after initial filling) up to 2 meters, maximum pressure 1.3 bar. Complete with 1.8 meter connection cable, 2 meter suction hose, 2 meter outlet hose, all fittings in 3/4?, suction filter and an automatic nozzle. Ideal for refueling vehicles.

Compact ~24Volt diesel pump with max. 40 liters / min. Perfomance. Weight only 3.6 kg, self-priming up to 2 meters, maximum pressure 1.3 bar. Complete with 1.8 meter connection cable, 2.25 meter suction hose, 4 meter outlet hose, all 3/4? fittings, suction filter and an automatic nozzle. Ideal for refueling vehicles.

Inexpensive diesel pump set in a simple design, for small tank volumes and for use in private or hobby areas. Output 40l/min with an input power of 600W (at 230V), self-priming and with automatic (aluminum) nozzle. In a complete set including 2m suction and 4m delivery hose, as well as counter, check valve, connections and housing with carrying handle. Only suitable for diesel and heating oil.

Self-priming 12Volt/280Watt diesel pump with max. 45l/min output. Suction head up to 2m, delivery head max. 15m = 1.5 bar, also suitable for outdoor use thanks to protection class IP55. Supplied with 4m connection cable and crocodile clips. Hose connections: 19mm hose nozzle on the suction side, 1” female thread on the pressure side.

Practical complete solution for filling up with Adblue, for example from 200L barrels. Consisting of a submersible pump (L 160mm, D 56mm) 12V with power supply for 230Volt, 4m AdBlue-resistant hose and matching automatic gun (fuel nozzle holder in the picture optional for an additional charge). Output approx. 30L/min.

Self-priming diesel pump with 100l/min delivery capacity, 230V, 1400 rpm, IP55. Complete with counter, 4m outlet hose and automatic nozzle. Connection cable 2m, connections 1", weight 28kg. Closed design means low ambient noise (80dB).Dimensions WxHxD approx: 36x37x23 cm.Fuel nozzle specifically for commercial vehicles, agricultural machinery and trucks - not suitable for cars.

Self-priming diesel pump with 60l/min delivery capacity, 230V, 2800 rpm. Complete with counter, 4m outlet hose and automatic nozzle. Connection cable 2m, connections 1", weight 19 kg. The closed design means less noise and better protection from the weather.Dimensions WxHxD approx: 36x37x23 cmFuel nozzle suitable for cars.

Self-priming diesel pump with 80l/min delivery rate. Complete with counter, 4m outlet hose and automatic nozzle. Connection cable 2m, connections 1", weight 28kg. The closed design and lower speed mean less noise and better protection from the weather. Motor 230 volts/1430 rpm, dimensions WxHxD approx: 36x37x23 cm.Fuel nozzle specifically for commercial vehicles, agricultural machinery and trucks - not suitable for cars. Suitable pistol for cars: 34044

Holder made of galvanized sheet steel with clamping screws and plastic drip container Suitable for attachment to standard sheet metal barrels and L-ring plastic barrels Easy removal of the drip container for emptying and Clean

Self-priming diesel pump with bypass valve, output approx. 60 l/min, motor 550W, 230 V, connections 1?IG.Complete with automatic fuel nozzle, 4 m outlet hose, switch, Plugs and fittings.

Self-priming diesel pump with bypass valve. Output approx. 60 l/min, motor 550 watts, 230 volts, self-priming up to 6.5 m. Connections 1?IG. Complete incl. 4 m outlet hose (3/4?), metal nozzle, switch and plug as well as all fittings, but without suction line.

Design like Profi 50, but output max. 72 l/min, motor 750 watts, 230 volts. Complete with metal nozzle and 4 m 1? outlet hose

Practical 12V pump for suctioning or transferring small amounts of liquids such as oils or diesel. Output approx. 1.5 L/min. Self-priming pump making it ideal for changing oil. Complete with suction lance and hoses.

Self-priming diesel pump with bypass valve and 60 l/min. capacityThis self-priming diesel pump with 60 l/min. capacity is the perfect solution for filling diesel tanks quickly and easily. The pump is equipped with an integrated counter and an automatic nozzle so that you can easily determine the amount of diesel filled up. The 4m long diesel-resistant discharge hose allows easy refueling regardless of the tank position. The pump is mounted on a practical wall bracket and has a 550W/230V motor. The connections are 1" female thread. The new version of the pump has significantly lower running noise and an integrated by-pass valve.The most important advantages of this high-quality diesel tank system: Self-priming for quick and easy filling of diesel tanks Integrated totalizer and automatic nozzle 4m long diesel-resistant discharge hose for easy refueling regardless of the tank position Practical wall bracket for easy installation 550W/230V motor for high performance 1" IG connections for universal use New design with significantly lower running noise and integrated by-pass valve Order your own yard filling station today and benefit from the many advantages!

Design like Profi 50, but pump with 77 L/min output, motor 750W/230V. Extra-strong design for frequent use and larger tank volumes.