Feed rack
Attachment for wall-mounted SlowFeed Plus
Retrofittable attachment for feed rack order no. 128914. For up to approx. 25 kg of hay. The front door makes it easy to open and close and at the same time prevents the animals from opening it unintentionally. The front door can be fitted on both sides (right or left hinged). Supplied as a kit 81 x 81 x 41 cm (WxHxD)
Double straw rack, 20 mm
Keep your pigs in a species-appropriate manner and reduce the frequency of tail and ear biting by giving them roughage! Extremely close bar spacing (20mm) reduces the risk of the slurry system becoming blocked because little feed is lost. For slatted floors, mounting above the feeding trough is recommended.Hot-dip galvanized, double version, 480 x 530 x 440 mm, for partition 35-40 mm.
Double straw rack, 40 mm
Keep your pigs in a species-appropriate manner and reduce the frequency of tail and ear biting by giving them roughage! Particularly suitable for administering raw fiber material in pig stables. Galvanized, for attaching to the box or side wall up to a maximum width of 43 mm. Due to the small width of 40 mm, only little material is lost and therefore the risk of blockages in the slurry system is reduced. Bar thickness: 6 mm~ L x W x H: 62.5 x 51 x 48 cm.
Galvanized basket rack
Rack for straw and feed. Galvanized. Dimensions: 37 cm above, 13 cm below, height 50 cm. Suitable for standing up or hanging!
Half round hay rack
Semicircular, galvanized hay rack (or straw rack) for wall mounting. Dimensions: 80 ~x ~43 ~x ~67 ~cmBar spacing: top 115 mm~ bottom 30 mmBar thickness: 10 mmSuitable for adult animals! Young animals (especially goats and sheep) could get caught in the bars, which become narrower towards the bottom!
Hay and concentrated feed box
With galvanized rack insert for combined feeding of hay and concentrated feed. Ideal for switching from milk to dry feeding. Color green. Capacity 11.5 liters. 330 x 512 x 270 mm (WxDxH)>suitable for all single calf huts or calf boxescan be hung on the inside of the fence< /li>Convenient filling from the outside Lid protects contents from rain Stable plastic container
Hay rack
Galvanized hay rack, particularly sturdy design, for wall mounting. Bar spacing: 80 mm, bar thickness: 10 mm. Dimensions (L x W x H): 55.9 x 29.5 x 22.8 cm
Hay rack
Galvanized hay rack, particularly sturdy! For wall mounting. Bar thickness: 10 mm, bar spacing: 96 mm. Dimensions (L x W x H): 75.3 x 47.5 x 46.5 cm
Hay rack 1.85m
Large hay rack for 5 calves, but can also be used for other animals. Made of hot-dip galvanized metal, for wall mounting. Bar spacing: 80 mm, bar thickness: 8 mm, L x W x H: 185 x 40 x 48 cm
Hay rack for calf group igloo
Galvanized feed rack for screwing on. Suitable for rear wall mounting in the group igloos 118773 + 121918. ~Rod spacing 75 mm. ~Rod 10 mm. 113 x 41 x 38 mm (LXTxH)
Hay rack with roof
For sheep, goats, deer, or calvesFor small bales and loose hayWith concentrated feed troughDelivered disassembledMaterial: Hot-dip galvanized metal115 x 81 x 131.5 cm (L x W x H)
Horse arena with safety feeding fence
Feeding rack for horses with 12 feeding places. The rack is suitable for round and rectangular bales up to 1.8 m long or diameter.Very stable design, high material thickness, equipped with two square tube beams! The material is hot-dip galvanized. For easy filling of the hay rack, 2 sides can be opened, the runners are height-adjustable (adjustment to the size of the animal!). Three-point hitch Very low feed losses Delivered as a kit including all-round roof edge protectionThree-point protective barBath dimensions inside: approx. 2 x 2 mComplete dimensions L x W x H: approx. 2.12 x 2.12 x 2.5 m
Metal feed saving rack
High-quality, stable feed rack made of galvanized metal for wall mounting. The construction allows the horse to eat slowly and appropriately. When eating, the grid is pressed against the food by the rotating rod, so the horse receives small portions and is kept busy for a long time. The roughage can be filled simply by lifting the grid from the front or, if necessary, from the back through an opening in the box partition. Weight: approx. 14 kg. Delivered disassembled as a kit, including assembly instructions, easy to assemble! L x W x H: 60 x 47 x 53 cm
Multi Corner Hay Rack
Made of durable plastic (PP), this hay rack has a 115-liter capacity and is shorter than standard models, making it suitable for smaller horses, sheep, and goats. It minimizes hay spillage, makes it easier to monitor feed intake, and allows for a natural feeding posture thanks to its space-saving corner mounting.Advantages & Features115-liter capacity – holds approximately 4–7 kg of roughage and reduces hay waste in the stall.22 holes and side openings – promote ventilation and allow dust and dirt to fall out the bottom.Low-profile design and 4 mounting tabs – also suitable for smaller horses and allows for space-saving corner mounting.Frequently Asked QuestionsWhat types of roughage is the hay rack suitable for?The hay rack is suitable for hay and straw.How much roughage does the hay rack hold?The capacity is 115 liters, which is equivalent to about 4–7 kg of roughage.How is the hay rack mounted?It is mounted in a corner using four mounting tabs.Dimensions:106 x 45 x 56 cmSee the shop for detailed dimensions!
Professional square hay feeder with safety catch gate
Completely made of hot-dip galvanized steel. 210 x 210 x 265 cm (L x W x H). Suitable for hornless cattle!Suitable for round and rectangular bales up to 1.8 m in length or diameter.12 feeding spaces, feeding height 76 cm, neck width 26 cm.Double reinforcing tubes.Three-point linkage.Height-adjustable roof.Interior dimensions: approx. 2 x 2 m.Weight 526 kg.Delivered as a kit.
Round rack with 12 feeding places
Feuerverzinkt, Palisadenfressgitter, Lieferung als Bausatz (3-tlg). Dreipunktanhängung.AbmessungenAußen-Ø 236 cmInnen-Ø 216 cmHöhe 116 cmFAIE Tipp: Zum Schutz vor Rost / Korrosion kann das untere Rohr am Bodenbereich mit Silolack gestrichen werden!
Round rack with 8 feeding places
Hot-dip galvanized, palisade feeding grid, delivered as a kit (4 pieces). DimensionsOuter 150 cmInner 132 cmHeight 116 cm
SlowFeed Plus wall eaves
- Stable wall rack for horses for species-appropriate feed intake- grid spacing of 5 cm ensures slow feeding and increases the well-being of the animals- with hinged lid for quick and easy filling for up to 14 kg of hay (depending on structure and compression)- inclined base plate ensures that the hay scraps do not slide down- Underfoot protection due to the bars reaching down to the floor- Supplied as a kit and very easy to assemble- For wall mounting (fixing included in the scope of delivery)- Material: Galvanized metalDimensions: 81 x 114 x 41 cm (WxHxD)Translated with www.DeepL.com/Translator (free version)
Square hay rack with palisade feeding fence
Roof-covered, hot-dip galvanized hay feeder with 12 feeding spaces for cattle and horses, featuring a palisade-style feeding barrier.Suitable for round and square bales up to 1.8 m in length/diameterSturdy, hot-dip galvanized steel constructionTwo square-tube support beams for structural stabilityFour opening sides for easy bale loadingHeight-adjustable skids to suit animal sizeThree-point linkage for easy transportDeep trough base to minimize feed wasteProtective roof-edge trim and guard bar for the tractor linkage attachment pointDimensions:Overall: 212 x 212 x 250 cm (WxDxH)Internal dimensions: 200 x 200 cm (WxD)
Square rack hobby
>8 feeding placesHot-dip galvanized steelsuitable for round and rectangular bales up to 1.4 m long or diameter1 x square tube beam2 sides can be easily opened for fillingThree-point hitchvery low feed lossesDelivered as a kit including all-round roof edge protection, three-point protective barInner tub dimensions: approx. 1.45 x 1.45 mHeight-adjustable runners (adjustment to the animal size )Dimensions 150 x 150 x 240 cm (WxDxH)When using feed that could attack the galvanizing (e.g. silage ), apply a protective coating (Siloack) in advance.
Stainless steel basket rack
Rack for straw, hay or feed. Made of stainless steel. Dimensions: 37 cm above, 13 cm below, height 50 cm. Suitable for standing up or hanging!
Stainless steel straw rack
Made of stainless steel, with very small bar spacing for as little feed loss as possible. For mounting on the wall, very good quality and workmanship!Dimensions: H x W x D: 61.5 x 38.8 x 26.0 cmInside bar spacing: 18 mm
Straw machine
Straw rack for species-appropriate pig farming, but also suitable for calves, goats or sheep! Thanks to the integrated tray in the lower part of the rack, less straw or hay ends up on the floor or in the floor gaps. Width: 57 cm at the bottom, 65 cm at the top. Height: 65cm. Contents: 60 l.
Straw rack, 1 m
Rack for roughage, for sheep and goats, but also for calves or pigs. (W x D x H) 98 x 36 x 52 cm
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
