Float valves

​The brass float valve “open type” is ideal for the make-up of any type of construction. Thanks to the large valve bore and its simple mechanical control, it can also be operated without pressure.Technical datamax. temperature 70°C.Max. line pressure 8/6 bar (3/4 or 1")Overall length 350/455 mm (3/4 or 1")Float ball 120/150 mm (3/4 or 1")

For connection to a water tank. This means you can connect a low-pressure drinker, for example, using a hose. Connection 10 mm, at the thickest point (nut) 24 mm. Total length approx. 58 mm.

Sealing kit consisting of plastic sealing piston and seal. Suitable for “PEKI” float valves

​With float. DN25, 1” external thread. Suitable for circulation pump C10

Total length 20 cm, with 1/2"~ Brass connection, water flow 7.5 l/min at 2 - 3 bar.

​Compact plastic fast-fill valve with extra high flow rate. The TOPAZ float valve stands for a high flow rate (FastFill) and enables extra high filling capacities of up to 270 l/min thanks to its diaphragm operating principle. It can be installed above or below the water surface. It should be emphasized that the valve closes slowly in order to avoid any backflow onto the water pipe and pumps.The quick-fill valve fills at full flow up to the highest level. All valves are made of high-quality ABS or nylon plastics and always complete with float.Overall length 270 mm. Weight approx. 530 g. Max. Temperature 60°C. Max. Line pressure 0.3 - 7 bar

For low-pressure drinkers or for converting float drinkers with high-pressure valve Order no. 18537. With 1/2"~ Connection, water flow up to 4 liters/min.

​DN25. connection 1“ male thread 1” female thread/union. Thermometer readability 0-80° C. Suitable for circulation pump C10.

​The universal compact float valve from the “PEKI” series fits into almost all standard float troughs. 1/2” external thread. Extra long 35 mm thread.Technical data:max. temperature 100°CFilling capacity 30 l/min at 3 bar line pressureMax. line pressure 6 barOverall length 330 mmWeight approx. 200g