Bite nipples & drinking troughs
Adjusting screw ST7
Brass adjusting screw, compatible with Lister ST7 bite drinkerLister original spare part number 09-0105010 (No. 10 on the spare parts diagram)
Automatic feeder GrowFeeder Maxi
For fattening pigs weighing 15-120 kgThe stainless steel feed intake mechanism simulates the animals' natural rooting behaviorMade of high-strength polypropyleneFeed flap and bite guard made of stainless steelEasy to use and easy to cleanCapacity: 60 litersPrecise feed dosing with 13 adjustment optionsIdeal for roughage feedingWater supply can be installed on both sides (1/2" external thread connection)Nipple drinker easily accessible even for small pigletsThe wet/dry system stimulates appetiteHeight: 107 cm, Diameter: 37 cm
Ball bite nipple AquaGlobe
Stainless steel version with brass threaded piece. The original AquaGlobe teething nipples are characterized by the following advantages: up to 40% less water wastage hygienic anatomically shaped excellent quality and durability should be installed horizontally (at the level of the snout) or inclined by 15Size: for sows or cattle up to 300 kg, length 97 mm, connection 3/4"-3/4" Less water wasted: The animal has to put the entire drinker in its mouth to activate the ball valve. This prevents the water play that occurs with conventional nipples. Because you use less water, you also save costs for manure storage and recycling. Hygienic: There are no nooks and crannies where bacteria could collect. In addition, the ball cleans itself through the rotating movement. AquaGlobe guarantees maximum hygiene. Anatomical shape: The special shape of the teething nipples (round with a flattened water opening) and the use of a movable ball as a valve and its placement make it easier for the animal to drink.
Bearing screw ST7
Brass bearing screw, compatible with Lister ST7 bite watererLister original spare part number 09-0105003 (No. 3 on the spare parts diagram)
Bite nipple 1/2
Bite drinker with 1/2" thread and 3/4" nipple for fattening and sows. The drinker has an adjustable nozzle of 0.8 - 1 - 2 mm for high or low pressure. Total length approx. 81mm, pressure cone 7.8mm, front drinking 25mm. Completely made of stainless steel!
Bite nipple 1/2
Round teething drinker for sows, fattening and runners, made of stainless steel. Connection and nipple1/2". Adjustable nozzle of 0.8, 1, or 2 mm for high or low pressure.
Bite nipple 3/4
Bite drinker for sows and fattening, made of stainless steel. Connection and nipple3/4". Adjustable nozzle of 0.8, 1, or 2 mm for high or low pressure. Total length 81 mm, pressure cone 7.8 mm.
Bite nipple 3/8
Teething drinker with3/8" thread and nipplefor piglets and runners. Completely made of stainless steel!
Drinking bowl SB 510 K
The plastic drinking bowl SB 510 K is equipped with a pendulum valve and is particularly suitable for piglets and runners.Technical data:Width: 100 mm Projection: 87 mmHole spacing: 76 mmConnection: R "~ External threadWater output: approx. 2.8 l/min. at 5 bar Weight: 0.6 kg
Lever ST7
Gunmetal pressure tongue, compatible with Lister ST7 bite drinkerLister original spare part number 09-0097002 (No. 2 on the spare parts diagram)
Mother ST7
M4 brass nut, compatible with Lister ST7 bite drinkers.Lister original spare part number 9004000034061 (No. 8 on the parts diagram)
O-ring St7
Rubber seal, compatible with Lister ST7 bite drinkerLister original spare part number 09-0105009 (No. 9 on the parts diagram)
Piglet bowl stainless steel
Stainless steel feeding bowl for piglets in the farrowing pen. 25 cm in diameter.With tension hooks for attachment to all standard slatted floors.
Piglet drinking bowl
Made of full stainless steel with 1/2" IT connection. Suitable for piglets up to 15 kg. Ideal for learning as the water collects at the front edge of the pool. Valve runs very smoothly and is easy to reach. H x W: 120 x 110 mm
Piglet feeder
TR-5 plastic automatic feeder for piglets.Convenient, precise feed control in 12 positions, even with a full hopper.The internal scraper system allows for ideal feed dosing or even complete shutoff.With stainless steel bite protection edge.Hygienic and easy to clean, as there are no corners where feed can get trapped.Dimensions: 80.5 x 30 x 70 cm (L x D x H)
Pool drinking mast
With this pool there is hardly any water loss because the water collects in the right side of the pool. Suitable for fattening. Fully stainless steel with 1/2" IT connection. H x W: 309 x 202 mm
ST7 cylinder screw
M4x35mm stainless steel screw, compatible with Lister ST7 bite watererLister original spare part number 9004003301081 (No. 11 on the spare parts diagram)
ST7 stop nut
Stainless steel M4 locking nut, compatible with Lister ST7 bite waterer.Lister original spare part number 9004000047081 (No. 12 on the spare parts diagram)
Teething potion ST 7
Brass drinking nipples for bulls, sows and fattening pigs. Water flow can be regulated!Projection: 97 mmConnection: external threadWater output: 2.3 l/min at 5 barWeight: approx. 385 g
Tilting trough for WaterLevel
Tipping trough suitable for WaterLevel valve. With fittings.
Trough nipple 1/2" female thread
Drinking nipple for pig feeders. Suitable for piglets and fattening. 1/2" FEMALE THREAD. Total length 93 mm. Pin Ø 11 mm. For detailed drawing see downloads.
Trough nipple 1/2" female thread
Drinking nipple for pig feeders. Suitable for piglets and fattening. 1/2" FEMALE THREAD. Total length 80 mm. Pin Ø 7.8 mm. For detailed drawing see downloads.
Trough sprayer 1/2
?Trough sprayer with slot. 1/2" AG. Water delivery: at 1 bar 3.5 l/min at 2 bar 6.2 l/min at 3 bar 7.2 l/min at 8 bar 8.0 l/min
Valve spring ST7
Replacement stainless steel spring, compatible with Lister ST7 bite drinkerLister original spare part number 09-0097004 (No. 4 on the parts diagram)
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
