Pasture gates, panels & fences

​The galvanized lambing pens are ideal for creating pens for ewes with lambs. The sturdy plastic cladding protects the lambs from draughts and helps the ewe to focus on her own lambs. This optimizes the mother-child bond and reduces the risk of rejected lambs. The generous dimensions of up to 2.50 m² offer sufficient space for mother and young animals, even in the case of multiple births.Dimensions:Length 150 cmHeight 92 cmWeight 16.2 kg

​The galvanized lambing pens are ideal for creating pens for ewes with lambs. The sturdy plastic cladding protects the lambs from draughts and helps the ewe to focus on her own lambs. This optimizes the mother-child bond and reduces the risk of rejected lambs. The generous dimensions of up to 2.50 m² offer sufficient space for mother and young animals, even in the case of multiple births. The integrated gate allows easy access to the pen.Dimensions:Length 150 cmHeight 92 cmWeight 18.8 kg

For agriculture, e.g. to be used as a sheep fence! Version heavily galvanized, height 1 m, wire thickness 2.4/1.9 mm. Wire spacing from bottom to top: 3x10 cm, 2x15 cm, 2x20 cm. Not rabbit-tight! Price / roll of 50 m

Game gate, which is particularly suitable for fencing large areas: forest or heath, pastures for deer, etc. Strongly galvanized version. Edge and cored wires: 2.4/1.9mm, vertical wire spacing 15cm. Distance from bottom to top: 4 x 10cm, 2 x 15cm, 4 x 20cm. Not rabbit-tight!Height 1.50, price / roll of 50m

​Suitable as a mobile shelter for sheep.One-piece hut made of fiberglass mat laminate (GRP), which guarantees uniform wall thickness and maximum stability even under extreme temperature fluctuations.The integrated UV protection ensures pleasant temperatures in the hut even in direct sunlight.A healthy climate is ensured by optimized air circulation thanks to the rising roof slope.With sliding window on the rear of the hut.Including two lifting eyes on the ridge of the hut for lifting and transport.Including a connection set with screw sets, hinges, and connecting rods for easy installation of plug-in sheds.The plug-in shed enclosure can be extended as required.Plug-in sheds not included.External dimensions: 238 x 223 x 189 cm (L x W x H)Weight: 104 kg

For mounting the locking option on a goal post. (Delivery without locking option order no. 98473). Inner diameter: 9cm

made of galvanized steel. To lock the gate leaves.

​Secures pasture panels reliably and stably lengthwiseCorrosion-resistant and weatherproof for permanent outdoor useSuitable for standard pasture panels with 50 x 30 mm profilesIncludes screws and nuts for quick and secure fasteningMaterial: Hot-dip galvanized metalScope of delivery: 1 x longitudinal connector, 2 x screws, 4 x washers, 2 x self-locking nuts, 2 x cap nuts

For easy installation of your pasture gate on the post.Set consisting of:2x hinges1x locking option6x wood screws

Multi-wire gate set with 4 electric fence straps (40mm), particularly suitable for horse fences. Complete set for easy assembly, a cost-effective solution for practically all gate widths. Length max.: 6m

For connecting two panels (flat oval tubes) or a panel with gate (round tube) to one panel (flat oval tube). Galvanized.

​Added safety for your horses: Secures pasture gates and panels against kicking, knocking and getting stuck by attaching the panel cover as additional protection with little effort!Innovative and robust solution as kick protection for pasture gates and panels: Eliminates the risk of horses getting their heads or legs caught between the steel tubes and getting stuck ideal for mobile stables, paddocks and partitions, exclusively for outdoor use in agriculture or industrycompatible with all commercially available pasture gates and panelsSuitable for all horse sizes and breedsany size of grazing gate or panel can be covered by combining several panel covers, can be cut to size individuallyEasy and simple to attach thanks to the low product weight and delivery including the necessary mounting parts and pre-drilled holesProtection against wind and draughts for horses and bedding or feed without darkening the area behind itMaterial: PVC, transparent, UV-stabilizedLength 100 cm, width 150 cm (depending on gate or panel width, simply attach several protective covers)Scope of delivery: 1 x PVC tarpaulin 1 m x 1.5 m x 2.5 mm, screws, washers, nuts and cable ties, assembly instructions

The light, arched pasture shelter offers horses in the paddock protection from sun, wind and weather. Height 3.25 m (mounted on pasture panels)Size 3.0 x 3.6 m (WxL). Complete with poles and green weather protection tarpaulin (640 g/m) for the roof. The installation is carried out on pasture panels, which are not included in the scope of delivery and must be ordered separately (if not available).Here is the recommendation1 x panel 3.60 m with gate (order no. 77751) 1 x panel 3.60 m (order no. 77748)2 x panel 3.00 m (order no. 77747)Delivery is made without gable and side tarpaulins. These must be ordered separately. Attention: Make sure you have adequate storm protection. It is recommended to drive in T-posts with a length of 2.13 m (order no. 119165) at all 4 corners and tie them into the chains of the panels!

The light, arched pasture shelter offers horses in the paddock protection from sun, wind and weather. Height 3.25 m (mounted on pasture panels)Size 6.0 x 3.6 m (LxW). Complete with poles and green weather protection tarpaulin (640 g/m) for the roof. The assembly is carried out on pasture panels, which are not included in the scope of delivery and must be ordered separately (if not available).Here is the recommendation1 x panel 3.60 m with gate (order no. 77751) < br>1 x panel 3.60 m (order no. 77748)4 x panel 3.00 m (order no. 77747)Delivery without Gable and side tarpaulins. These must be ordered separately. Attention: Make sure you have adequate storm protection. It is recommended to drive in T-posts with a length of 2.13 m (order no. 119165) at all 4 corners and integrate them into the chains of the panels!

​3-way adjustable, telescopic pasture fence gate. Mounting dimensions 125 - 300 cm. Height 90 cm. Hot-dip galvanized. Weight 31 kg. Incl. mounting setØ base section: 48 mmØ insertion part 1: 42 mmØ slide-in part 2: 33 mmØ slide-in part 3: 25 mmOverlap of all slide-in parts at least 22 cmOverlap of the last slide-in part: 28 cm

3-way adjustable, telescopic electric fence gate. Mounting dimensions 170 - 400 cm. Height 90 cm. Hot-dip galvanized. Mounting kit included.

Three-way adjustable, telescopic electric fence gate. Mounting dimensions 350–600 cm. Height 110 cm. Hot-dip galvanized. Mounting kit included.

Ideal for building mobile and flexible fencing, as well as temporary boxes and stables, also very popular for fencing riding circles and lungeing areas.Height of the upper tube 1.60 m, total height 1.70 m. Safety jump bar prevents injuries to animals. When jumping onto the panel, the animal does not get between the panels. Made of flat oval tube 50 x 30 x 1.5 mm, clear tube spacing 20 cm. Quick chain closure makes it easier and quicker to connect multiple panels. High stability with low weight, very good, secure stand thanks to the U-shaped base, completely hot-dip galvanized.

Practical plug-in system for easy and tool-free assembly of hordes. The plug horde is ~ Suitable for creating pre-collection rooms, pens, individual and group boxes or stable partitions. 7 cross tubes with increasing distance from bottom to top, tube diameter: 25.0 or 21.3 mm. Completely hot-dip galvanized. Height: 92cm.

Practical plug-in system for easy and tool-free assembly of hordes. The plug-in tray is suitable for creating pre-collection rooms, pens, individual and group boxes or stable partitions. 7 cross tubes with increasing distance from bottom to top, tube diameter: 25.0 or 21.3 mm. Completely hot-dip galvanized. Height: 92cm. Panels with gate: Door with locking latch and reinforced frame, passage width 57 cm.

Practical plug-in system for easy and tool-free assembly of hordes. 7 cross tubes with increasing distance from bottom to top, tube diameter: 25.0 or 21.3mm~ completely hot-dip galvanized.Height: 92 cm, length: 1.83 mWith two centrally arranged lamb hatches with adjustable hatch width (17.5 cm / 24.5 cm).

The panel with gate allows a passage to be installed in the fencing. The total height is 2.20 m (gate entrance) and the gate width is 1 m. The height of the top fence pole is 1.60 m. With locking latch for opening and closing the fence~ completely hot-dip galvanized.

The mobile pasture shelter (pasture tent) for sheep, goats and other animals offers protection from rain, wind and sun. Dimensions 275 x 275 cm. Scope of delivery: Roof construction including screws and tarpaulin with eyelets and leather straps, 3 galvanized plug-in racks 275 x 92 cm, 1 galvanized plug-in rack 275 x 92 cm with door, 4 ground anchors 60 cm

Extremely tear-resistant, durable and robust, yet much lighter than metal fences!New, handy wildlife fence provides perfect protection against deer and red deer, but only limited protection against wild boars and hares (hares can bite through the fence), can also be used in agriculture as a sheep or poultry fence, as well as for green spaces and sports facilities, viticulture and fruit growing, approx. 10 years UV-resistant, black, mesh size 50 x 50 mm, 100 metres.