Tools & machines
Unsere Angebote
Compact, versatile vacuum cleaner in dust class L with integrated filter cleaningQuick coupling of metaBOXes with tools and accessories on the vacuum cleaner for easy location changesWet/dry vacuum cleaner with commercial approvalFor vacuuming on power tools and for cleaning construction sites, workshops, etc.Power socket for a power tool for using the vacuum cleaner's automatic on/off switch PressClean: manual filter cleaning by means of a strong air flow when the switch on the vacuum cleaner is pressed during breaks in workUser protection: certified according to the EU standard for dust of dust class LSuction stop during wet vacuuming when the maximum filling level is reachedAutomatic overrun for completely emptying the suction hoseAntistatic basic equipment prevented static charge when using the appropriate accessoriesEasy transport thanks to cable and hose holder as well as depot for pipes and nozzlesPractical accessories depot and storage areaPractical accessories compartment with hinged lid for small partsIncluded vacuum accessories with quick system for quick conversion in use ~Characteristics:Air output max.: 4200 l/min Negative pressure: 225 hPa (mbar) Filter area: 3500 cm Absorption capacity max.: 1200 WContainer volume: 30 lSuction hose : 32 mmHose length: 3.2 mWeight: 10.8 kgCable length: 5.5 mNoise emission Sound pressure level: 78 dB(A) Measurement uncertainty K: 2.5 dB(A) ~Scope of delivery:Suction hose Quick ( 32 mm / 3.2 m)Connection sleeve Quick 28/35 mmHandle adapter Quick Professional3 suction tubes made of plastic, fleece filter bag, crevice nozzle, floor nozzle (300 mm wide), suction nozzle (120 mm wide) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
High-quality combination workshop sander with 250 watts/230 volts, 2,980 rpm, disc diameter 150/20 mm, Sanding belt 686/50mm, Own weight approx. 7Kg.
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.19-piece set with drill bits from 1.0 to 10.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treatable steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure hold in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.25-piece set with drill bits from 1.0 to 13.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean results.6-piece set, containing one drill bit each in 2, 3, 4, 5, 6, and 8 mm sizes.
Professional HSS twist drill in a ground design for a long service life and optimal drilling performance. Metal cassette equipped with drill bits from 1.0 - 10.0mm with a pitch of 0.5mm.
High-quality HSS cobalt drill bits for use when drilling high-quality steels up to a strength of 800N/mm2, e.g. stainless steel. Metal cassette from 1.0 to 10.0mm, pitch 0.5mm.
High quality HSS cobalt drill bits for use in high quality steel such as stainless steel. Metal cassette with drill 1.0-13.0mm in 0.5mm pitch
Professional HSS twist drill in ground design for a long service life and optimal drilling results. Metal cassette with drill 1.0 - 13.0mm in 0.5mm pitch.
High-quality HSS drill set for universal use in alloyed and unalloyed steel. Sizes 1.0 - 10.0mm in 0.5mm pitch.
High-quality HSS drill bits from 1.0-13mm with a pitch of 0.5mm for universal use in machining alloyed and unalloyed steel.
Industrial HSS-Cobalt twist drill for machining alloyed and unalloyed steel as well as rust- and acid-resistant steels. Increasing in 0.5mm increments from 1.0 to 13.0mm. In metal cassette
Terrax drill cassette with rolled HSS twist drills in 0.5mm increments from 1.00 - 10.00mm. Stored in a sturdy metal cassette.
HSS Co drill, ground, cylindrical with 135 cross ground, bronze surface in a practical metal cassette. Suitable for drilling in steel, stainless steel, cast steel, non-ferrous metals, plastics and special alloys. Up to 1100 N/mm tensile strength. Contents: 1-10 x 0.5 mm
Practical range of drill bits, equipped with drill bits in HSS-G quality. Ground design, cylindrical with 135 cross grinding and bright surface. Ideal for drilling in steel and cast steel, alloyed and unalloyed, gray cast iron, malleable cast iron, nodular cast iron, sintered iron, nickel silver, graphite, non-ferrous metals and plastics.Delivered in a robust metal cassette.in 0.5mm increments< /li>
High-quality twist drills in 0.5mm increments from 1.0mm - 13.0mm increasing. Stored in a sturdy sheet steel cassette.
Roll-rolled HSS twist drills 4241 in a practical metal cassette. Contents: 10 pieces each 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 and 8 mm. 5 pieces each 8.5 / 9 / 9.5 and 10 mm.
The electric drill sharpener BSG 13E was specially developed to sharpen drills quickly and precisely.It is particularly suitable for occasional use in the DIY and hobby sector. The device can sharpen drills with a diameter of 3 mm to 13 mm grinding and is equipped with a high-quality diamond grinding wheel that ensures a long service life. With its compact and user-friendly design, the drill bit sharpener enables easy and efficient grinding.The 80 W motor power and the 230 volt connection offer sufficient power for the do-it-yourselfer - and hobby use. It is a reliable solution for resharpening drills in home workshops, extending the life of the drills and achieving precise drilling results.Technical data of the BSG 13E drill sharpener:Motor power: 80 W (watts)Electrical connection : 230 voltsSpeed: 4200 rpm (revolutions per minute)
For easier work and a longer service life for cutting tools.
Content: 0.4 l (€21.22 / 1 l)
High-performance oil, cools and lubricates and extends the service life when drilling, milling, tapping etc. Economy set with 6x400ml spray cans.
High-performance cutting oil low odor increases tool life, e.g. B. when drilling, milling, turning chisels and tapping with tool protection without aggressive additives suitable for all non-ferrous metals silicone-free spray behavior: swirling, slightly point-adjusted spray jet for targeted application of the cutting aid at the processing point combination of special active ingredients, free of chlorine-containing compounds after Spray onto the surface to be treated and allow it to evaporate can be used even for difficult machining processes particularly recommended in the area of metal processing, aluminum, steel and cast iron processing also suitable for stainless steel.
Content: 0.4 l (€13.90 / 1 l)
A compact and lightweight vacuum cleaner designed for use in tight spaces such as workshops, cars, tractor cabs, etc. Its light weight of just 3.5 kg, combined with the practical shoulder strap, makes it easy to use. The dry vacuum cleaner features a washable and reusable HEPA F9 filter. Included in the package: 32 mm diameter hose (0.5–1.6 m extendable), round nozzle with brush, crevice tool, shoulder strap, and silencer.
High-quality vacuum cleaners in dust class L. Thanks to their compact design, light weight (only 4.7 kg), and practical shoulder strap, they are ideal for use on the go or in tight spaces. The large, manually cleanable nonwoven filter bag ensures high suction power and effective filtration. The vacuum features a blower function for clearing small crevices. Technical specifications: Dimensions approx. 240 x 400 x 200 mm, motor: 1,200 watts, 230 volts, container capacity: 6 L. Included in delivery: unit, 30.5 mm diameter, 0.5–1.5 m extendable hose, fleece filter bag, shoulder strap, crevice tool, upholstery tool, round nozzle with brush and reducer.
Special electrode for hardfacing of tough and hard materials on machine parts such as excavator parts, mixer arms, agricultural machinery, etc.Small package containing 20 electrodes, 3.20 x 350 mm. Recommended welding current: at least 110 amps.
Inexpensive maneuvering aid up to a tire width of 350 mm. Load capacity max. 450 kg. Easy maneuvering thanks to 4 smooth-running swivel castors. Delivery in pairs.
The welding power electrode inverter EASY-STICK 161 is a reliable device that is based on modern inverter technology and was specially developed for 230 volt applications. With its versatile functions, it is ideal for assembly work, be it on the ladder, scaffolding or outdoors and for use on the generator, for example in company workshops, metal construction, construction sites or for farmers.Hot Start : By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from burning out Arc force control: Internal monitoring of welding current and welding voltage resolves short circuits quickly and safely. This stabilizes the arc and the electrode can be processed without any problems Scope of delivery &~ Equipment3 m welding cable 16 mm with electrode holder 300 A3 m ground cable 16 mm with ground terminal 300 ATechnical data:< /li>Welding power 10 - 160 AmpFrequency: 50/60 HZOpen circuit voltage: 73VMax. Current consumption: 38AProtection rating: IP21SInsulation class: HWorking temperature: -10 - 40 degrees CelsiusRequired generator power: >~ 8.3 kVATotal power: 8.3 kVASheet thicknesses 1.0-6.0mmWeight: approx. 4.4kg Dimensions (LxWxH): 320x135x255mm
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
