Tools & machines
Unsere Angebote
Compact, versatile vacuum cleaner in dust class L with integrated filter cleaningQuick coupling of metaBOXes with tools and accessories on the vacuum cleaner for easy location changesWet/dry vacuum cleaner with commercial approvalFor vacuuming on power tools and for cleaning construction sites, workshops, etc.Power socket for a power tool for using the vacuum cleaner's automatic on/off switch PressClean: manual filter cleaning by means of a strong air flow when the switch on the vacuum cleaner is pressed during breaks in workUser protection: certified according to the EU standard for dust of dust class LSuction stop during wet vacuuming when the maximum filling level is reachedAutomatic overrun for completely emptying the suction hoseAntistatic basic equipment prevented static charge when using the appropriate accessoriesEasy transport thanks to cable and hose holder as well as depot for pipes and nozzlesPractical accessories depot and storage areaPractical accessories compartment with hinged lid for small partsIncluded vacuum accessories with quick system for quick conversion in use ~Characteristics:Air output max.: 4200 l/min Negative pressure: 225 hPa (mbar) Filter area: 3500 cm Absorption capacity max.: 1200 WContainer volume: 30 lSuction hose : 32 mmHose length: 3.2 mWeight: 10.8 kgCable length: 5.5 mNoise emission Sound pressure level: 78 dB(A) Measurement uncertainty K: 2.5 dB(A) ~Scope of delivery:Suction hose Quick ( 32 mm / 3.2 m)Connection sleeve Quick 28/35 mmHandle adapter Quick Professional3 suction tubes made of plastic, fleece filter bag, crevice nozzle, floor nozzle (300 mm wide), suction nozzle (120 mm wide) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
High-quality combination workshop sander with 250 watts/230 volts, 2,980 rpm, disc diameter 150/20 mm, Sanding belt 686/50mm, Own weight approx. 7Kg.
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compact laser rangefinder with an operating range of 0.05 to 20m. 4 measuring functions: Length measurement, area measurement, volume measurement and continuous measurement. Simple operation and large display for effortless work. Integrated horizontal bubble level for accurate measurement. Deviation at 20m max. +/-2mm. Dimensions: 105x47x27mm, weight only 103g. Supplied complete with belt pouch, wrist strap, batteries and quick-start guide.
Robust chain hoist with a maximum load capacity of 1.5 T. Lifting height 1500mm. Secure hold thanks to the load pressure brake and rotating safety load hooks. ~The chain can be pulled through quickly thanks to the chain freewheel circuit. Weight: only 10.8 kg.
Sola line laser with only 0.2mm/m +/- measuring tolerance. Self-leveled up to -/+3°, application range up to 30m. For simple and precise marking of horizontal and vertical lines for interior work, tiling, pipe installation, substructures, etc. Dimensions: 110x70x100mm. Supplied in a promotional set incl. batteries (operating time 8 hours), case and universal wall bracket
For extracting engine, transmission and other lubricating oils, also suitable for other liquids with low viscosity, such as water and antifreezeCan be used in the car, motorcycle, shipbuilding and industrial sectorsCan be operated manually using a hand pump, making it independent of compressed airTransparent container for checking the fluid levelCapacity: 5.5 lWeight: 2.48 kgDimensions: approx. 220 x 220 x 600 mmScope of deliverySuction unitSuction pipe, Ø 10 mm, length 400 mmSuction pipe, Ø 6 mm, length 750 mm
Hand winch for horizontal pulling of loads.Can be used in a variety of areas without electricity, such as in the garage, in the garden, on trailers or in forestry and agriculture.Equipment:20 m steel cableLoad hook with teardrop openingIntegrated brakeHand crank with soft gripBase plate with holes for permanent mounting on suitable Support points. ~Technical data: ~Max. Tensile force without pulley: 720 kgMounting plate LxW: 140 x 86 mmLength: 360 mmWidth: 270 mmHeight: 160 mm
With brushless motor - particularly efficient, durable and maintenance-freeFor low-burr sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolantApplication e.g. in metal construction, joineries, interior fitters etc.Easy to transportFour speeds selectable at the touch of a buttonMotor with soft startDigital display showing the selected speed and current power in wattsAngle adjustment 0° - 45° for mitre cutsVice with quick adjustmentLarge LED work light on the underside of the handle to illuminate the work areaWith spindle lock for quick saw blade changeTechnical data: Saw blade speed(s): 700 / 900 / 1100 / 1300 min¯¹ Saw blade diameter: 355 mmMitre angle:_l0 - 45° Dimensions and weight:Weight: approx. 25 kg Electrical data:Drive motor power: 3.5 kW Supply voltage: 230 VMains frequency: 50 Hz Cutting capacity 0° (round) pipe: 130 mm Cutting capacity 0° (square) pipe: 125 x 125 mmCutting capacity 0° (rectangular) pipe: 170 x 110 mm
Handy compressor, innovative design. ~The compact design, the sturdy plastic wheels, the extendable handle and the low weight (only 12kg) make it easy to transport. ~No oil change due to the oil-free compressor necessary. Quietly running compressor with a maximum output of 180L/min and 8 bar maximum pressure. ~Of course complete with pressure regulator for continuous adjustment of the working pressure, pressure gauge and one-hand quick coupling. ~Ideal compressor for mobile use in the home and hobby area.
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Very comfortable with ergonomically padded headrestHandle and six oil-resistant swivel castorsPractical side storage areas ~Static support load max. 120kg Dimensions (lying position): (L x W x H) 1010 x 475 x 130mm Weight (net): approx. 4.8kg
Sturdy metal saw with high cutting accuracy and large cutting range. Cutting pressure adjustment via HY cylinder. Saw blade tension precisely adjustable via pressure gauge. Automatic limit stop at the end of the cut. Drive via a 2-stage gearbox means cutting speed can be changed in seconds and there is no slipping or wear of V-belts. Complete with base frame, coolant pump, swivel saw arm and bi-metal saw blade.Technical data:Motor power 1.1 kW / 400 VoltCutting range round: 225 mm at 90°, 160 mm at 45°Cutting range square: 245x180 mm at 90°, 160x160 mm at 45°Saw blade speed: 45/90 m/min switchable via 2-stage motor.Saw blade dimensions: 2480 x 27 x 0.9 mmDead weight: 185 kgDimensions: 1400 x 685 x 1235 mm
Mètre à ruban pratique dans un cadre en V en métal léger anodisé, le ruban est en plastique jaune renforcé de fibres de verre, Impression de la graduation en mm jusqu'à la longueur de 20 cm, longueur restante avec graduation en cm jusqu'à la fin du ruban, sur roulement à billes, forme ergonomique avec picots de préhension, bras de manivelle rabattable et position de stationnement pour le début de la bande afin de la protéger contre les dommages pendant le transportclasse de précision CE II
Care, maintenance and protection of machines, devices, precision tools, measuring devices, molds and punches For lubrication when cutting threads Ideal for long-term preservation even at high humidity and aggressive Ambient airContains no waxes, silicone or TeflonProtects against rust for a long timeDisplaces moistureEliminates squeaks and creaksFor loosening stuck screw connections and jointsApplication temperature from -40C to +150CIs used in industry and trade, in all types of vehicles, in shipping , agriculture, in the home and garden as well as fishing equipment
Content: 0.2 l (€44.75 / 1 l)
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
Pulley with hook for electric wire rope hoists, with hook and pulley.
With flawless toothing: Several of the 72 teeth engage simultaneously and transmit extreme torque. Switch lever for clockwise and counter-clockwise rotation. Unlocking mechanism: release the inserts at the touch of a button. Head and shaft forged from a single piece of CrV steel. 2x nickel-plated and matt chrome-plated. Handle made of oil and acid-resistant TPR (thermoplastic rubber) with practical hole for hanging.
With changeover function directly on the ratchet mechanism. Several of the 52 teeth engage simultaneously and transmit extremely high torques. Unlocking mechanism: release the inserts by pressing a button. Head and shaft forged from a single piece of CrV steel, nickel-plated twice and matt chrome-plated. Handle made of oil and acid-resistant TPR (thermoplastic rubber) with practical hole for hanging.
With changeover function directly on the ratchet mechanism. Several of the 52 teeth engage simultaneously and transmit extremely high torques. Unlocking mechanism: release the inserts by pressing a button. Head and shaft forged from a single piece of CrV steel, nickel-plated twice and matt chrome-plated. Handle made of oil and acid-resistant TPR (thermoplastic rubber) with practical hole for hanging.
The ratchet has a high level of durability and transmits up to 700 Nm of torque.This is achieved with a durable mechanism with only 24 teeth and a long handle. Due to its robustness, it is used for loosening or screwing stubborn screw connections, such as B. used on tire rims in cars.Material: Premium Flex chrome vanadium steelHousing drop-forged chrome-plated according to industry standard ISO 1456:2009Advantages:High durabilitylong lever (465 mm)24 teeth
Short exposure time - quick cleaning of the rimsThe Ballistol rim cleaner is an extremely powerful gel cleaner with an effectiveness indicator. This means that a color change occurs as the effective power increases (the cleaner turns purple). ~Removes stubborn dirt such as brake abrasion, oil and rubber residues highly effectively and automatically. If used regularly, it can be diluted for light dirt. Also suitable for TPMS (tire pressure monitoring system).Cleaning status is indicated by a change in colorFoams up when sprayedRemoves light dirt Rust filmTested material compatibility for all rims (steel, high-gloss aluminum, multi-piece, matt)Neutral to rubber and painted surfacesOdor-reduced, acid-free and biodegradable< /li>without nanotechnology APPLICATION: Spray rims generously from a short distance (approx. 30 - 40 cm) and allow to take effect for 2 to 6 minutes. If there is particularly stubborn dirt, repeat the cleaning process, using a rim brush or microfiber cloth if necessary. Then rinse completely with a powerful jet of water or high-pressure cleaner.Notes: Rinse thoroughly, do not allow to dry and do not use in the blazing sun or on heated surfaces. Protect Ballistol rim cleaner from frost. ~ ~Danger warning: Harmful if swallowed. May cause allergic skin reactions. Causes serious eye irritation.Appearance: viscous, orangeOdor: product-specificpH value: 5.5Relative density: 1.11 g/cmViscosity kinematic: approx. 19mm/sSolubility in water: miscible
Content: 0.75 l (€21.20 / 1 l)
Suitable for blind rivets, blind rivet nuts and for sheet metal nibblingwith 2 sheet metal nibbler insertsIncludes 5 interchangeable nose pieces and 6 interchangeable rivet nut pulling mandrelsNo tools required to change the nose pieceslittle effort required thanks to innovative lever technologynarrow pliers headwith rubber handleBody made from special tool steelBlind rivets aluminum: 2.4 - 3.2 - 4.0 - 4.8 - 6.4 mmSteel blind rivets: 2.4 - 3.2 - 4.0 - 4.8 mmRivet nuts: M3 - M4 - M5 - M6 - M8 - M10
Precise sharpening of saw blades within a few minutes Quick and easy sharpening processSaw blades from 80 mm to 700 mm can be sharpenedSturdy cast iron design for precise workMotor unit can be swiveled by 20° for sharpening interchangeable-tooth saw bladesSaw blade holder angle adjustable from 45° to -30° for different tooth anglesVibration-damping feet for vibration-free and low-noise operationTechnical data:Grinding wheel diameter: 125 mm Grinding wheel bore: 13 mmGrinding wheel width: 10 mm Grinding wheel type: DiamondSetting angle support table left: 30° Setting angle of support table right: 45°Dimensions and weight:Length: approx. 700 mm Width/depth: approx. 382 mmHeight: approx. 295 mm Weight (net): approx.17 kgElectrical data:Drive motor power: 250 W Length of connection cable: 1.8 mProtection class: 1Protection class: IP54 Supply voltage: 230 VMains frequency: 50 Hz
"VDE screwdriver" for safe working on live parts up to 1,000 V AC voltage. Protective insulation sprayed onto the blade, safety tested piece by piece. Slot: 2.5 - 4.0 - 5.5 - 6.5 PH 1 - PH 2
Diamond-tipped flap disc for working on tiles, ceramics, paving, porcelain stoneware, etc. Premium quality for long service life and universal use. Suitable for all commercially available one-hand angle grinders.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
