Tools & machines
Unsere Angebote
Compact, versatile vacuum cleaner in dust class L with integrated filter cleaningQuick coupling of metaBOXes with tools and accessories on the vacuum cleaner for easy location changesWet/dry vacuum cleaner with commercial approvalFor vacuuming on power tools and for cleaning construction sites, workshops, etc.Power socket for a power tool for using the vacuum cleaner's automatic on/off switch PressClean: manual filter cleaning by means of a strong air flow when the switch on the vacuum cleaner is pressed during breaks in workUser protection: certified according to the EU standard for dust of dust class LSuction stop during wet vacuuming when the maximum filling level is reachedAutomatic overrun for completely emptying the suction hoseAntistatic basic equipment prevented static charge when using the appropriate accessoriesEasy transport thanks to cable and hose holder as well as depot for pipes and nozzlesPractical accessories depot and storage areaPractical accessories compartment with hinged lid for small partsIncluded vacuum accessories with quick system for quick conversion in use ~Characteristics:Air output max.: 4200 l/min Negative pressure: 225 hPa (mbar) Filter area: 3500 cm Absorption capacity max.: 1200 WContainer volume: 30 lSuction hose : 32 mmHose length: 3.2 mWeight: 10.8 kgCable length: 5.5 mNoise emission Sound pressure level: 78 dB(A) Measurement uncertainty K: 2.5 dB(A) ~Scope of delivery:Suction hose Quick ( 32 mm / 3.2 m)Connection sleeve Quick 28/35 mmHandle adapter Quick Professional3 suction tubes made of plastic, fleece filter bag, crevice nozzle, floor nozzle (300 mm wide), suction nozzle (120 mm wide) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
High-quality combination workshop sander with 250 watts/230 volts, 2,980 rpm, disc diameter 150/20 mm, Sanding belt 686/50mm, Own weight approx. 7Kg.
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
Hydraulic oil based on high-qualityselective raffinates with active ingredients to improveoxidation resistance and corrosion protection.DIN 51 524/Part 2.
Content: 20 l (€7.00 / 1 l)
Hydraulic oil based on high-qualityselective raffinates with active ingredients to improveoxidation resistance and corrosion protection.DIN 51 524/Part 2.
Content: 5 l (€5.99 / 1 l)
Hydraulic oil based on high-quality selective raffinates with active ingredients to improve oxidation resistance and corrosion protection. Contains special detergent additives.
Content: 60 l (€4.65 / 1 l)
Hydraulic oil based on high-quality selective raffinates with active ingredients to improve oxidation resistance and corrosion protection. High viscosity index.DIN 51 524/Part 3.The hydraulic oil HVLP ISO-VG 32 is suitable for higher temperatures (up to max. 120°C) in hydraulic systems.
Content: 20 l (€7.00 / 1 l)
Hydraulic oil based on high-quality selective raffinates with active ingredients to improve oxidation resistance and corrosion protection. High viscosity index.DIN 51 524/Part 3.The hydraulic oil HVLP ISO-VG 46 is suitable for higher temperatures (up to max. 120°C) in hydraulic systems.
Content: 5 l (€5.99 / 1 l)
Very compact 2-stage maneuvering jack with 30 T lifting force in stage 1 and 15 T in stage 2. Thanks to its compact design and low weight of just 24 kg, it is also ideal for use on site (flat tires), but of course also saves space in the workshop. Hydro-pneumatic drive via any commercially available compressor/compressed air system. Hard chrome-plated cylinder and high-quality seals for a long service life. Technical data:Load capacity 30/15 T Minimum height 145 mm Max. height incl. attachments: 415 mmStroke 1: 80 mm Stroke 2: 70 mm Overall length with folded handle only 485 mm
A practical ice scraper car ice scraper with whisk. ~With a handy and non-slip handle, the whisk has a rubber scraper lip andthe scraping surface removes the ice very effectively. ~
Milwaukee cordless impact drill with 13mm keyless chuck2-speed metal gearbox with impact function for use in masonry or concrete.High torque up to 60Nm for heavy screwdriving work.Brushless motor for a long service life, compact design and low energy consumption.LED workplace lighting for good visibility in every application.Drilling capacity in wood up to 89mm.Special offer - complete set including machine, charger, one battery 18V 2.0Ah/4.0 Ah,transport case and a high-quality bit assortment
Vario-Tacho-Constamatic (VTC) full-wave electronics for working with material-appropriate speeds that remain constant under load Adjusting wheel for pre-selecting the speed Robust die-cast aluminum gear housing for optimal heat dissipation and longevityRotatable carbon brush bridge: Maximum performance even in anti-clockwise rotation for loosening stuck screwsMetabo Marathon motor with patented dust protection for a long service lifeMetabo S -automatic safety clutch: mechanical decoupling of the drive when the insert tool is blocked for safe workingRight-left rotationKeyless drill chuck and spindle stop gear for convenient one-handed tool changeSpindle with Hexagon socket for screwdriver bits for working without a drill chuckOverload protection: protects the motor from overheatingRestart protection: prevents unintentional starting after a power interruptionCable-friendly ball grommet for optimal freedom of movement when WorkCarbon brush wear indicator shows the impending carbon brush change in good time Comparable device characteristics Max. torque: 46 Nm/17 Nm Drilling diameter in concrete : 20 mm Drilling diameter in steel: 16 mm/8 mm Drilling diameter in soft wood: 40 mm/25 mm Idle speed: 0 - 1,000 / 0 - 3,100 /min Rated input power: 1,300 W Output power: 790 W Speed at nominal load: 1,000/3,100 /min Max. impact rate: 58,000 /min Clamping neck diameter: 43 mm Drill spindle thread: 1/2 " - 20 UNF Drill chuck span : 1 - 13 mm Drill spindle with hexagon socket: 1/4" (6.35 mm) Weight without power cable: 3 kg Cable length: 4 mScope of delivery: Keyless drill chuck Futuro Plus, ~ long additional handle, ~ Drilling depth stop, ~ Plastic case
Long version - the impact wrench socket 3/4” is the ideal accessory for professional tradesmen and ambitious DIY enthusiasts.It is particularly robust and is ideal for use with impact wrenches and pneumatic tools.With a 3/4 inch connection, it fits perfectly on standard impact wrenches and ensures powerful, precise torque transmission.Ideal for loosening and tightening wheel nuts and other tight screw connections.High-quality materials ensure a long service life even under intensive use.The impact wrench socket 3/4” is available in different sizes to provide the right solution for every application.SHOCKWAVE™ impact-resistant steel (chromium molybdenum) is a very high-quality steel for a particularly long service life.Precise fit due to 6 clamping points.Long design for tightening long bolts.Punched and color-coded sizes for easy differentiation and long-lasting laser-engraved article number.Double perforation and groove for easy attachment of securing accessories.
3/4? to 1/2?, extra strong version, original Gedore.
Versatile impact nut cassette with 1/2" drive for professional use 22 and 24. ~Ideal for any 1/1 impact wrench. ~The 10-piece impact socket set is an essential tool for anyone who works with impact tools in the workshop or at home. ~ High-quality materials and workmanship, the impact socket set is made of high-quality chrome vanadium steel, which is known for its durability and robustness. The attachments are precisely manufactured and guarantee a secure fit on the tool.Comfortable use, ergonomic The handle of the impact socket set lies comfortably in the hand and allows for fatigue-free work. The attachments can be easily changed so that you can quickly and easily switch between the different applications. Versatile range of uses for a variety of applications, such as Example: Dismantling nuts and screws Loosing stuck connections Working on metal and plastic Demolition workSafety and qualityTechnical data:Drive: 1/2 inchNumber of attachments: 10Material: chrome vanadium steelWeight: 1.5 kg
Long (82 mm) sockets in sizes 17, 19, and 21 mm with colored plastic coating to protect your rims.Includes a tire tread depth gauge and tire marker.Ideal for changing wheels on the spot.
Impact sockets made of chrome-molybdenum steel for hand or power tool use. 1/2" square drive for any standard impact wrench.Contents: One each of the following sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, and 21 mm.In a sturdy plastic case.
Proven professional impact wrench, for tough use in the automotive sector, on assembly lines and in agriculture. Handy impact wrench with impact-resistant composite housing, double hammer impact mechanism for rapid torque build-up. Exhaust air is routed via the handle, which prevents brake dust from being stirred up. Holder square ", torque clockwise rotation adjustable in 3 stages, torque counterclockwise rotation 1220 Nm, air requirement 510l/min., working pressure 6.3 bar, weight 3.2 kg, connection 3/8".
Powerful 1/2? impact wrench with a maximum torque of 1112 Nm. ~Despite high performance, it only weighs 1.9 kg. ~Exhaust air via the handle, so no brake dust is stirred up. ~Composite housing for maximum stability and comfortable working. ~Air requirement approx. 190 l/min, working pressure 6.2 bar, tightening torque adjustable in 3 levels.
The 1/2” impact wrench socket is the ideal accessory for professional tradesmen and ambitious DIY enthusiasts.It is particularly robust and is ideal for use with impact wrenches and pneumatic tools.With a 1/2 inch connection, it fits perfectly on standard impact wrenches and ensures powerful, precise torque transmission.Ideal for loosening and tightening wheel nuts and other tight screw connections.High-quality materials ensure a long service life even under intensive use.The 1/2” impact wrench socket is available in different sizes to provide the right solution for every application.SHOCKWAVE™ impact-resistant steel (chromium molybdenum) is a very high-quality steel for a particularly long service life.Precise fit due to 6 clamping points.Long design for tightening long bolts.Punched and color-coded sizes for easy differentiation and long-lasting laser-engraved article number.Double perforation and groove for easy attachment of securing accessories.
Set extra strong (specially hardened). 10, 11, 12, 13, 15, 17, 19, 21, 22, 24mm.
Hardened special nuts 3/4? in sheet steel box in sizes 26, 27, 29, 30, 32, 36, 38.
Professional socket cassette with a complete range of sockets from 5/32? - 1 3/8?. With this high-quality tool set you have all the important tools for working with inch screws, which are often used in English and American machines/devices, in the smallest of spaces. This socket cassette has a handy yet stable one-handed reversible ratchet for quick and comfortable work. In addition to the sockets with 1/2 and 1/4 inch drive, the set has an extensive range of bits. Thanks to the compact and sturdy plastic case, easy transport or clean storage of this high-quality tool is no problem.
Handy and lightweight impact wrench, with double hammer impact mechanism up to 560 Nm torque. Air requirement approx. 420 L/min, weight only 2.1 kg, complete set including impact wrench, oiler, extension and 10 impact sockets 9-27 mm.
Consisting of: 1 basic and 2 add-on shelves, each with 4 shelves. Galvanized, modular design, quick plug-in assembly, shelves height-adjustable in 25 mm increments. T-profile frame with pre-assembled connecting plates, 4 shelves with 150 kg load capacity per shelf (with evenly distributed load), bay load 900 kg Basic shelf: nominal length + 56mm, nominal depth + 36mm. Add-on shelf: nominal length + 6mm, nominal depth + 36 mm. Very stable design, can be expanded at any time with additional add-on shelves. Shelf dimensions: HxWxD: 2000x3000x400 mm.
Size 24x27x32 and a 3/4 inch square for attaching a nut. Leg length 37 cm.
Removes the most stubborn dirt and incrustations from surfaces contaminated with oils, grease, grease, coal dust, tar stains, bitumen and adhesive residue.
Content: 0.5 l (€11.12 / 1 l)
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
