Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
With automatic load pressure brake and all-steel housing in a compact design, with short, reinforced hand lever and freewheel circuit for quickly pulling through the unloaded, high-strength chain. Ratchet lever engages in every position. Carrying and loading hooks with safety bars. Weight only 2.5kg.Ideal for assembly work - easy to use and store! Lifting height 1.5m, load capacity 250kg, chain 4x12mm.
with direct bit holder for bits 6.3 mm (1/4"), additional bit holder in the handle (magnetic), with 72 teeth.Technical features:Lever: switch lever< br>Return angle degrees: 5
Allows for easy tire changes, suitable for both professionals and hobby mechanics. The plastic design ensures work without damaging the wheel.
The line wrench set that no mechanic should be without. Suitable for diesel injection lines and other line fittings. Length: 119mm Sizes 14, 17, 19mm.
This thick grease spray provides long-lasting lubrication without dripping or running. It is particularly suitable for reducing the friction of metal parts and thereby keeping the connection smooth. 400ml.
Content: 0.4 l (€33.90 / 1 l)
Robust mini crane for a maximum load capacity of 900 kg. Lifting height max. 1290 mm, 360 swivel, load arm foldable and adjustable from 870 - 1290 mm. For quick and easy self-assembly on pick-ups, trailers or stationary.
For clamping and tensioning profile, round and flat material. Longitudinal serrated gripping surfaces, with adjustment screw and release lever. One-handed operation. Chrome plated surface. Chrome vanadium steel.Contents: 7", 10", 12".
made of steel machined on all sides for easy marking and straightening work galvanized stop corners exposed
made of steel machined on all sides for easy marking and straightening work galvanized stop corners exposed
Made of high-quality tool steel, machined on all sides, for marking and straightening work, galvanized, stop corners exposed.
With inductively tempered edge zones of the striking surfaces, forged hammer head DIN 1041Double curved hickory handle DIN 5111, with additional long, hardened steel handle protection sleeve, the sleeve, ring wedge, locking plate and wood screw make the hammer head and wooden handle a single unit, ~ROTBAND- PLUS handle attachment, high security long service life best price/performance ratio
Universal scissor lift table trolley with a load capacity of 225 kg.Low weight (36 kg) and large wheels for easy transportation. The maximum lifting height is 710 mm, minimum 225 mm, the stable platform with standard rubber support has a surface area of 708 x 450 mm. Simple operation of the lifting cylinder via a foot pedal.
Universal 230Volt charger suitable for all Milwaukee 12 and 18V batteries.
Practical reciprocating saw with one-handed operation and LED light. Supplied without battery and charger. (FAIE No. 129044)Quik-Lok blade holderWith a 22 mm stroke length for controlled cutting and an idle stroke rate of 3,000 rpmPatented FIXTEC™ technology for quick and efficient blade changesThe pivoting shoe allows the user to optimize their cutting positionTechnical data:Type: Li-IonVoltage: 18 VIdle stroke rate: 0-3000 (r/min)Stroke length: 22 mmWeight: 2.6 kgType: M 18 FHZ-0X
HSS-Co Form C with right-hand twist 40 Relief ground flanks Metric ISO thread DIN 13 Sheet 1 Tolerance fieldISO2 (6H) for blind hole threads for steels up to approx. 900 N/mm strength
Very high-quality machine taps in HSSE-Co5 design for blind holes M3-12.
Very high-quality machine taps from M3-12 in Co5 design for through holes.
Machine vice made of highly tempered machine cast. Jaw width: 100mm, clamping width: 80mm
Welding wire roll with 5 kg for stainless and acid-resistant Cr and Cr-Ni steels. Wire diameter 0.8mm. Protective gas: Argon, mixed gases.
Content: 5 kg (€35.99 / 1 kg)
The all-rounder: 13 screwdriver profiles accommodated in one tool, screwdriver handle with integrated ratchet function, switchable, telescopic blade with 1/4? bit holder, adjustable from 55 to 125 mm, bit magazine contains 13 bits 1/4?: slot 4 4.5 5.5 mm , PHillips PH 1 2 3, Pozidriv PZ 1 2, TORX T10 T15 T20 T25, hexagon 4 mm, compilation of the most common bits for slotted, cross-head, Pozi and TORX screws, as well as the i6KT 4 mm bit e.g. B. for assembling Swedish kit furniture
Practical, compact spirit level with spirit level for horizontal, vertical and 45 measurements. Strong magnet ensures good adhesion to metal.
Professional magnet holder with magnetism that can be switched on and off, making workpieces easy to set up and easy to clean. Suitable for flat angles and round material. Heavy version with 40 kg holding force. Dimensions 95x110x29 mm.
Practical welding angle magnet with 30/45/60 and 90 angles. Holding force approx. 10 kg, dimensions: 59x51x16mm, 2 pcs. economy pack.
Practical paper roll holder in two parts. Is mounted with magnets on any magnetic surface, making it universally applicable (e.g. tool trolley, workbench, hinged door cabinet,...) The capacity of the holder is 30 kg, the roller holder is 33 mm.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.