Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
with locking screw, beak length 40mm, scale and vernier matt chrome-plated, for inside, outside and depth measurement.
With high flame temperature - suitable for soldering, flambing, lighting and much more.The burner can also be used in the kitchen for flambing or caramelizing.Design with safe piezo ignition, locking switch and regulator for adjusting the flame size.< br>Filling is done with conventional lighter gas.
Professional Stihl pole pruner with the best power-to-weight ratio for powerful cutting work in fruit growing and tree care. Stihl 4-MIX engine with 1.9 HP with enormous pulling power and high torque. Remarkable cutting performance thanks to the 1/4? PM3 saw chain with 30 cm cutting length, side chain tensioner and automatic decompression valve. High ergonomics and guiding rigidity thanks to the weight-reduced square telescopic shaft with a total length of 270 up to 390 cm. Technical data: displacement 36.3 cm, performance 1.4 / 1 .9 kW / HP Cutting length 30 cm Saw chain Stihl PM3 1/4? 1.1 mm 64 E Weight 7.9 kg Total length 270 - 390 cm Vibration value left / right 4.3 / 4.8 m/s Sound pressure level 92 dB (A) Sound power level 109 dB (A )
Akku Hochentaster im Set mit Akku AK20 und Ladegerät AL101.Der HTA 50 eignet sich perfekt für Privatanwender und Gartenpfleger.Mit dem ergonomisch optimierten Bediengriff haben Sie alle Bedienelemente des STIHL HTA 50 komfortabel in der Hand. Die kompakte Bedieneinheit können Sieals Rechts- oder Linkshänder nutzen. Der gesamte Griffbereich ist mit einemkomfortablen Griffschlauchumhüllt,so dass Sie den Akku-Hochentaster fest in den Händen halten.Mit derSTIHL 1/4 Zoll-PM3-Sägeketteerzielen Sie eine hoheSchnittleistung. Aufgrund desgeringen Gewichtsundderseitlichen Kettenspannung,für ein leichtes Nachspannen der Kette, arbeiten Siebequem, ergonomisch und kräftesparend. Der Öltankdeckel am halbtransparenten Öltank lässt sich für ein schnelles Nachfüllen einfach öffnen.Mit demrobusten Asthakenam kompakten Schneidkopf lässt sich loses Schnittgut greifen und entfernen. Sie können den Akku-Hochentaster STIHL HTA 50 mit dem optionalenSTIHL Smart Connector 1.0nachrüsten. Der HTA 50 hat eineGesamtlänge von 280 cm und dank des teilbaren Schaftesist einplatzsparender Transport sowie eine einfache Lagerung möglich. Durch eine optionale Schaftverlängerung können Sie den Schaft auf 330 cm verlängern. Mit dem Akku-Hochentaster STIHL HTA 50 können Sie als Privatanwender bei derGartenpflegeeffizient arbeiten.Insbesondere beim Rückschnitt hoher Äste, aber auch bei derGehölzpflege und dem Beseitigen von Totholzbietet Ihnen der robuste Hochentaster eine effiziente Unterstützung.Durch den kompakten Schneidkopf haben Sie stets eine gute Sicht, wenn Sie Äste in Baumkronen schneiden. Technische Daten:Gewicht: 3,6 kg ohne Schneidausrüstung und ohne Akku, Schnittlänge: 25 cm,Akkulaufzeit mit AK 20 bis max. 45 min.
Professional grinding and polishing machine with a powerful 1100 watt motor. Can be used for all materials thanks to the infinitely variable speed regulation. Disc diameter 180 mm. Completely including polishing hood, polishing pad and plastic case.
Nitecore NB10000 Gen4 – Lightweight Power Bank for On the GoThe NB10000 Gen4 delivers 10,000 mAh of power while weighing only about 143 g.Ideal for hikers, runners, or travelers. You'll always have enough power without carrying much weight.Lightweight and PowerfulThe carbon fiber casing saves weight. Modern battery technology ensures high performance in a compact design.Fast ChargingYou can charge devices with up to 22.5 W. Two USB-C ports are included.This allows you to charge two devices simultaneously or charge the power bank and your phone at the same time.Flexible UseChoose between Eco mode (longer runtime) and normal mode (more power).Rugged ConstructionWith an IPX7 rating, the power bank is resistant to rain and splashes of water. Perfect for outdoor use.Easy OperationSimply tap twice to turn it on. Can even be used with gloves.LED lights indicate the charge level and status.CompactFits in any pocket, running belt, or backpack.Safe operationOvercharge, overvoltage, and overheat protection are integrated.Included: Power bank + charging cable (also usable as a carrying strap)Technical specifications:Capacity: 10,000 mAhPower: up to 22.5 WPorts: 2 x USB-CWeight: approx. 143 gProtection: IPX7
For the toughest use, cutting hardness approx. 63 HRC.
Particularly powerful cutting pliers for cutting metal wire (including hardened and tempered alloys). The ergonomic shape and length allow maximum force to be applied while still being comfortable in the hand. With non-slip 2K handles, forged design. Also cuts nails, bolts and screws (up to 4mm). Premium design, even for the toughest applications.
According to DIN ISO 5749, large leverage for easy cutting, inductively hardened precision cutting, cutting edge hardness 63 - 65 HRC, for hard wire/piano wire - see table for values, max. cutting capacity 1.4 - 2.0 mm, GEDORE special tempered steel, drop-forged, oil-hardened and tempered, JC = chrome-plated, with 2-component handle covers, TL = steel gray, with blue-dipped anti-slip handles.
Maximum precision and service life thanks to 4-fold storage. Vibration dampened by elasto coupling. Standard with 3 m cable, 1 roller and tapered pin, mandrel, key and dresser. -Collet chuck 6 mm - Motor 500 W/230 V - Speed 25000 rpm.
Jaw width 125 mm, clamping width 120 mm.
The 12-piece Precision mechanic set is a must for every mechanic. It consists of 2 slotted screwdrivers, 2 Phillips screwdrivers, 4 profile screwdrivers and 4 hooks. These are equipped with a 2-component handle. Length 170mm.
11-piece tool set with 3 Phillips and 6 flat screwdrivers as well as 1 magnet and engraver each.
High-quality special grease coupling in a compact design. Thanks to the one-piece clutch basket, the clutch holds securely and reliably even in tight spaces. Thread 10x1 standard.
For universal use. For cutting solid materials and thin-walled workpieces. For steel and cast iron. Professional quality for a long service life and high performance.
Grip eyelet pliers18 eyelet impression devices (interchangeable)Eyelets of various sizes10mm snap fasteners for riveting and screwingDelivered in a practical plastic display cassette.
0 to 25 bar, 60 mm, thread connection 1/4?.
Type RF, bar 0 to 10, 60 mm, thread connection 1/4?.
With 2x internal thread and pressure gauge. Push-pull design to fix the set value. For pipe installation, compressors, etc. Includes pressure gauge, display up to 16bar, approved for 12bar.
High-quality pressure reducer in the best Fronius quality for argon and Co2. Adjustable from 3-30l/min - precisely adjustable, keeps the output pressure constant during the welding process.Robust housing with low weight, shut-off valve runs smoothly, up to 200bar inlet pressure.
Oxygen pressure reducer for fish transportation and aquacultureThis pressure reducer ensures a safe and controlled oxygen supply for fish during transportation and farming.Maximum inlet pressure: up to 200 barFinely adjustable outlet pressure: 0 to 10 barMaximum flow rate: 50 m³/hThe robust design and reliable control technology ensure a constant supply of oxygen.Ideal for use in oxygen systems on transport vehicles, basins or tanks.
Connection 4 x 1/4?, maximum pressure 10 bar.
Connection 1x 3/8"~ and 3x 1/4", maximum pressure 10 bar, with relief valve
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.