Tools & machines
Unsere Angebote
Compact, versatile vacuum cleaner in dust class L with integrated filter cleaningQuick coupling of metaBOXes with tools and accessories on the vacuum cleaner for easy location changesWet/dry vacuum cleaner with commercial approvalFor vacuuming on power tools and for cleaning construction sites, workshops, etc.Power socket for a power tool for using the vacuum cleaner's automatic on/off switch PressClean: manual filter cleaning by means of a strong air flow when the switch on the vacuum cleaner is pressed during breaks in workUser protection: certified according to the EU standard for dust of dust class LSuction stop during wet vacuuming when the maximum filling level is reachedAutomatic overrun for completely emptying the suction hoseAntistatic basic equipment prevented static charge when using the appropriate accessoriesEasy transport thanks to cable and hose holder as well as depot for pipes and nozzlesPractical accessories depot and storage areaPractical accessories compartment with hinged lid for small partsIncluded vacuum accessories with quick system for quick conversion in use ~Characteristics:Air output max.: 4200 l/min Negative pressure: 225 hPa (mbar) Filter area: 3500 cm Absorption capacity max.: 1200 WContainer volume: 30 lSuction hose : 32 mmHose length: 3.2 mWeight: 10.8 kgCable length: 5.5 mNoise emission Sound pressure level: 78 dB(A) Measurement uncertainty K: 2.5 dB(A) ~Scope of delivery:Suction hose Quick ( 32 mm / 3.2 m)Connection sleeve Quick 28/35 mmHandle adapter Quick Professional3 suction tubes made of plastic, fleece filter bag, crevice nozzle, floor nozzle (300 mm wide), suction nozzle (120 mm wide) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
High-quality combination workshop sander with 250 watts/230 volts, 2,980 rpm, disc diameter 150/20 mm, Sanding belt 686/50mm, Own weight approx. 7Kg.
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.
All Products
For devices with high air consumption. Inner 10 mm, length 10 m, with coupling and plug.
Content: 10 m (€3.99 / 1 m)
Rubber mallet with ash handle with 2 flat trackslow-reboundtough-hard rubber
rubber mallet with an ash handle and 2 flat tracks.Head length: 139 mmHandle length: 380 mmWeight: 1185 gHardness: 90 Shore AStandard: Din 5128-90
safe and long-term corrosion protection, as the rust layer is neutralized and converted into a protective layer particularly effective and safe to use due to the excellent penetration ability into the rust pores easy further processing due to the good spray pattern and perfect film formation safely stops the development of rust when used correctly neutralizes the rust layer forms a perfect primer layer for further processing ideally suited for the maintenance and renovation of industrial structures, systems, machines, vehicles ~Note: ~loose rust, grease, dirt as well Remove layers of paint that have been infiltrated with rust Clean the rust area thoroughly. Shake vigorously before use, then spray on just a covering layer. (Spray distance approx. 25 cm). Can sprays perfectly above +10 C ~Other technical properties ~Colour: colorless
Content: 0.4 l (€35.98 / 1 l)
Dissolves stubborn rust with immediate effect, protects against corrosion, makes it grippable, displaces water immediately.
Content: 0.75 l (€19.93 / 1 l)
High-performance rust remover with corrosion protection extremely penetrating with high capillary action reduces the mechanical force and prevents bolts and screws from tearing absolutely acid-free special formula does not resinify synthetic oil mixture in slowly evaporating solvent allowed to evaporate after spraying onto the surface to be treated with liquid products Use a brush, cloth or dipping method and allow the solvent to evaporate loosens even completely rusted connections can be used as corrosion protection, care oil for tools and precision mechanics.
Content: 0.4 l (€13.90 / 1 l)
Robust hand lever hoist with a maximum load capacity of 250 kg and a lifting height of 1.5 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
Robust hand lever hoist with a maximum load capacity of 250 kg and a lifting height of 3,0 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
Robust hand lever hoist with a maximum load capacity of 500 kg and a lifting height of 1.5 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
Robust hand lever hoist with a maximum load capacity of 500 kg and a lifting height of 3,0 m. Thanks to its low weight and compact design, the chain hoist offers a wide range of applications for lifting and pulling tasks. The lever hoist is perfect for use in workshops, on construction sites and in confined working areas where safe load handling is required.The lever hoist features robust load hooks, a load chain manufactured in Europe and a double locking mechanism for added safety. The load pressure brake is automatically activated as soon as a load is picked up by the hook.The switch lever on the hand lever allows you to select 3 working positions:U - Load liftingD - Load loweringN - Middle position - Chain freewheel, quick pulling of the chain possible with the hand wheel or by hand.The chain freewheel allows the chain hoist to be easily and quickly adjusted to the desired working position. The load hooks can be rotated to allow for maximum flexibility when attaching to the mounting points. The fine-toothed gear requires only a low hand lever force of 206N.The product is delivered in a practical bag for storage and transport.
For 18 mm square mount, arm length 300 mm, for 5, 10, 16, 20 ton winch.
Can be used with all types of winches.For applications in limited space.Lifting by moving the ratchet up and downFor 16 mm square socket, arm length 250 mm, for 2.5 ton winch.
High-quality tow rope with 2 load hooks, breaking load 2500 kg, length 4 m.
Completely galvanized, with automatic braking mechanism, awarded with the official test mark of the professional associations. Easy to operate with little effort thanks to appropriately selected gears. Without rope and hooks.
Equipment details: Lid can be easily closed using screw locks12-volt fluorescent tube with 230-volt power supply and external switchSuitable for various blasting materials, e.g. quartz, glass spheres , plastic ball, etc.Ideal for cleaning, derusting or removing paint from all kinds of metal parts, e.g. engine parts, fittings, signs, housings, rims, hingesHigh-quality latex work gloves are secure connected to the housingOptimal visibility and occupational safety when processing workpieces due to the viewing window with glued-on protective filmDust-free work thanks to all-round seals on the lid and door framesStable storage grid enables Placing workpieces in the interior of the cabinWith drain opening for changing the blasting materialSuction pipe for the blasting material attached to the bottom of the collecting containerWith compressed air connection on the outside li>Glass bead blasting media, corundum blasting media, silicon carbide, plastic blasting media, etc. can be used ~Technical data: Volume work cabin : 90lAir consumption: 200-350l/minWorking pressure: 2.8 - 8.0barCompressed air connection: 3/8"< li>Blast media core size: 0.42 - 0.125Inside dimensions: 580 x 480 x 300mmOutside dimensions: 590 x 489 x 490mmWeight: 17 .25kgInlet pressure max.: 8.6barMax. Weight on the support grid: 10kgMax. Weight of blasting material: 12kgHand hole diameter: 155mm
Powerful sandblasting gun with sand recovery thanks to a fine brush attachment, minimal dust and dirt development. Ideal for processing smaller areas/parts. Working pressure 6-8 bar, air consumption approx. 500 L/min. Suitable for steel granules from 0.2 - 0.8mm.
Suitable, for example, for the Güde GBTS400 belt sander combination or similar models.
240 grit universal sanding belt - suitable for Holzmann SM100 satin finishing machine. Width 100 mm, length 284 mm
Schleifbandset passend für Band/Tellerschleifer GBTS 400.
Practical sanding block measuring 210x105 mm. Easy to attach with terminal strip. Complete set with 12 pieces of matching sanding sheets K60, 80 and 120.
1 Velcro sanding plate each 150 mm, K60, K80, K100, K120, K180.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
