Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
Resin and acid free.
Content: 0.1 l (€29.90 / 1 l)
High strength straight shackle with screw bolts
High-strength, curved shackle with screw bolts
Stable shaft extension for the pole pruner attachment MA-MS 25 of the garden battery-operated multifunctional system Faie No: 122306Increase the reach by 88 cmMetabo Quick tool-free quick coupling systemLength: 95 cm
Width 45mm, suitable for most knives. Blade length at least 60mm Also for draw knives.
Width 140, Stably supports a long thin blade. Blade length at least 160mm Also for draw knives.
for all sizes of scissors and hedge trimmers. Also for hand planer knives (not for carbide)
Tormek's new holder for small knives, the SVM-00 (pat. pend.), allows you to sharpen really small blades, such as - carving knives, notching knives, pocket knives...The new holder is used together with the Tormek sharpening device SVM- 45 (order no. 30659) used!
450x340x70 mm, painted, with removable PVC inserts.
According to DIN 338, HSS quality (high-performance high-speed steel).
Robust jack with 3 T lifting force. Very clean and sturdy workmanship: 29.5 kg net weight. Stroke: 125 mm min. to max. 455 mm. Length of pump rod: 990 mm Quick lift due to double lifting cylinder. Easy lowering via handle bar.
Robust car jack with a load capacity of 2 tonnes. Minimum height 140 mm, maximum height 820 mm, weight approx. 60 kg, dimensions 1200x430x200 mm.
Practical, mechanical maneuvering aid, ideal even in confined spaces. The foot pedal is used to quickly and easily raise the tire or tires of the vehicle to be lifted, after which it can be moved in any direction without any problems. Load capacity 680kg per trolley, working width 320-640mm.
An indispensable companion for precise cutting work in the workshop and household. ~This side cutter combines functionality with durability and is specially designed for cutting wires, cables and other materials. ~Ideal for electricians, DIY enthusiasts and craftsmen who value precision and reliability. ~Precise cutting performance, the Mllner side cutter 180mm has been developed with sharp cutting edges to ensure clean and precise cutting. ~No matter whether you If you need to cut through soft wires or harder materials, these side cutters deliver excellent results.Chrome vanadium steel, satin-finished headStrong-walled multi-component plastic handlealso suitable for hard wire
Made of hot-forged tempered steel. Surface painted black with blue-dipped protective handle cover.
Powerful side cutters for wire diameters up to 2 mm. The pliers also have a crimping function for 0.5–2.5 mm² cables and a stripping function for 1–2.6 mm. Total length: 200 mm.
Silicone lubricant for household, workshop and garden. Excellent sliding and lubricating effect, for door locks, garden tools, curtain rails, drawers, hinges, etc. Contents: 300 ml.
Content: 0.4 l (€21.22 / 1 l)
Silicone spray (special lubrication for plastics)Lubricates and protects parts made of rubber, polymers, plastic and metals. Tested material compatibility for all materials in technology, industry and automobiles. Tested for use on plastic gears, plastic gears, rubber bearings, slide rails, rollers and slideways. Also suitable for cables, rubber strips, window seals and foam rubber seals on car doors.
Content: 0.2 l (€31.45 / 1 l)
High-quality colorless release agent and lubricant, provides lasting care and protection without greasing. Economy set with 6 cans of 400 ml each.
High-quality, colorless release agent and lubricant maintains and protects permanently without being greasy reliably prevents glue, adhesives and varnishes from sticking to treated surfaces quickly makes plastic slide rails, rollers and bearings slippery again particularly suitable for use in foundries, in window construction, in the automotive industry and in the packaging industry Other technical properties Color: colorless Temperature: -40 to +120C Container: spray can
Content: 0.4 l (€13.90 / 1 l)
The clear silicone spray with excellent lubricating properties is water-repellent and protects against moisture. It prevents blockages and has high pressure resistance. 400ml.
Content: 0.4 l (€36.03 / 1 l)
According to ISO 6787, jaw position 15Swedish model, reel with left-hand drive With adjustment scale Protected mechanics and an additional striking surface enable light Hits without affecting the function of the keyHand-friendly 2-component handle (version JC and JP) for fatigue-free workRecessed grip ensures a secure hold even with oily hands With hanging hole Chrome vanadium steel Size 12", length 305.0mm, scale 0-36mm
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.