Tools & machines
Unsere Angebote
Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
10-piece 1/2? cassette each with 1 multi-tooth insert M 5,6,8,10,12 and 14 short and M 6,8,10 and 12 long. In sheet steel cassette.
Metal pourer suitable for 10 and 20l metal canisters
Five products in one!Rust remover - lubricant - contact spray - corrosion protection - cleanerSilicone-, resin- and PTFE-free, penetrates rust layers, loosens stuck mechanisms and seized vehicle and machine parts, removes stubborn dirt, displaces moisture from electrical contacts and prevents leakage currents, leaves a thin protective film that prevents the reformation of moisture and rust on metal parts. WD-40 – tuning for your toolbox!
Content: 0.1 l (€54.90 / 1 l)
Five products in one! Rust remover - lubricant - contact spray - corrosion protection - cleanerFlexible nozzle - perfect for hard-to-reach areas, bendable, retains the desired shape, silicone-, resin- and PTFE-free, penetrates rust layers, loosens stuck mechanisms and seized vehicle and machine parts, removes stubborn dirt, displaces moisture from electrical contacts and prevents leakage currents, leaves a thin protective film that prevents the reformation of moisture and rust on metal parts. WD-40 – tuning for your toolbox!
Content: 0.4 l (€47.37 / 1 l)
6-fold special valve/spray head combination for various areas of application low odor suitable for bonding in the temperature range from -25 C to max. +70 C permanent synthetic rubber dissolved in solvent and dimethyl ether spray thinly onto a grease-free, clean and dry surface and approx Allow to flash for 3 - 5 minutes (depending on the ambient temperature), then press together with strong pressure to create tight connections between foams, various plastics, plastic films, paper, cardboard, wood, veneers, metal, cardboard, felt, textiles, insulating materials and limited polystyrene foam Test in advance for suitability Note: After use, be sure to spray the can overhead until only propellant gas comes out in order to prevent the valve and spray head from sticking Do not store or process below 10 C.
Content: 0.4 l (€21.22 / 1 l)
The spring compressor set with plastic protective inserts is ideal for assembling and dismantling the McPherson springs on the front and rear axles. A spacer is available for springs that taper in one direction. This means that small and large penholders can be used together. The spacer causes an offset of 30 mm. The plastic protective inserts prevent the spring coating from being accidentally scratched, thus reducing the risk of rust and the spring breaking again. The different pairs of spring holders with a diameter of 60 mm - 21.2 cm enable use on many types of vehicles such as BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi /strong> etc. The spring compressor has a maximum clamping force of 1500 kg, a working distance of 30 cm and is not suitable for impact wrench operation. for quick and professional removal and installation of spring struts< /li>suitable for most McPherson struts with conical and cylindrical springs
Handy but powerful emergency power generator with a peak power of 5.6kW/7kVA at 400 volts and 2.8KW/2.3kVA at 230 volts. Driven by a 4-stroke petrol engine with electric start.Thanks to the large tank with 25L capacity, this generator has a running time of up to 13 hours at 75% load. The electronic (AVR) voltage regulation ensures problem-free operation even of sensitive devices. Top equipment with 1 socket each 230 / 400 and 12 volts, electric start, operating hours counter and chassis for easy transport. Dimensions: 72x55x59cm, weight 70 kg.The AVR voltage regulation ensures stable power supply for sensitive devices. Sockets for 230 volts, 400 volts and a 12 volt socket offer versatile connection options. An operating hours counter and the chassis for easy transport are included. With dimensions of around 72x55x59 cm and a weight of 70 kg, it is handy and robust. The SPTE 7000 AVR is ideal for power outages, in construction, outdoors or as a backup power supply in homes and businesses.
Compact chain hoist with 1000 kg load capacity. Length of load chain/stroke 3 meters, length of operating chain 2.5 meters. Weight: approx. 10.7 kg
Stable chain hoist with a maximum load capacity of 2000 kg. Length of load chain/stroke 3 meters, length of operating chain 2.5 meters. Weight: approx. 16.5 kg
Unique Metabo brushless motor for fast work progress and maximum efficiency with every useOverload protection: protects the Motor from overheatingHigh torque with a particularly handy design at the same timeLow kickback work with extremely high torqueTwelve speed/torque levels for a wide range of applications Integrated work light to illuminate the work area Robust die-cast aluminum gear housing for optimal heat dissipation and longevity With practical belt hook, can be fixed either on the right or left L Delivery without batteries and charger!Technical data:Voltage battery pack: 18VIdle speed: 0-2150/min Max. impact rate: 4250/minMax. torque: 400Nm Speed/torque levels: 12Tool holder: external square 1 /2?Weight (with battery): 1.9kg
With metal strip for wall mounting, 1a polystyrene, impact-resistant, oil, grease and acid resistant. Dimensions: 252x147x129 mm.
With metal strip for wall mounting, 1a polystyrene, impact-resistant, oil, grease and acid resistant. Dimensions: 175x103x75 mm.
With metal strip for wall mounting, 1a polystyrene, impact-resistant, oil, grease and acid resistant. Dimensions: 95x102x52 mm.
protects and preserves all metal surfaces and produces a streak-free, radiant shine colorless the treated surface is perfectly protected from rapid re-contamination and a stained appearance surface-active substances in solvents versatile use, including in the food sector particularly recommended for stainless steel surfaces of work surfaces, cupboards and shelves , wall coverings etc. cleans and reduces new fingerprints ~Other technical properties ~Container: spray can
Content: 0.5 l (€15.98 / 1 l)
High-performance coating with a stainless steel look heat-resistant stainless steel alloy as extremely resistant cathodic corrosion protection temperature-resistant: up to approx. +300 C (short-term up to approx. +450 C) based on acrylic resin and rust-proof stainless steel pigments particularly finely ground and bound in the form of scales in the acrylic resin Spray on a grease-free, clean surface and allow to dry for approx. 20 minutes to improve the surface after welding to protect all free-standing metal structures particularly recommended in the areas of metal construction, welding and air conditioning and refrigeration technology silicone-free Other technical properties Contents : 400ml Temperature resistance: up to +300 C (short-term approx. +450 C) Color: silver gray Container: spray can
Content: 0.4 l (€23.90 / 1 l)
Very robust jack with 50t lifting capacity for use in commercial, trucking or agricultural applications. Technical data: Height min. 265mm, stroke: 168mm, total height max. 433mm, due to the low weight of 25 kg it is also ideal for use in breakdown services.
You are ideally equipped with our dust bags for wet and dry vacuum cleaners. The bags are made of high-quality material and offer a high level of dust absorption. They are also odorless and easy to replace. Contents: 5 pieces Suitable for wet and dry vacuum cleaners: Faie no. 124986, 124969, 124970
Spine width 11.3, thickness 0.75, length 4 mm.
High-pressure spray gun for older Kärcher high-pressure washers with an M22 thread for compatible lances, pipe cleaners, etc.
Set with sizes 8x10, 11x13, 14x15, 17x19 and 21x22mm. The keys are made of chrome/vanadium, matt chrome-plated and cold forged, delivered in the practical Tetron roll-up bag.
Copper-coated aluminum cable with 50 mm² diameter, length 5 m, short-term peak load up to 1,000 amps. Ideal for construction machinery and large tractors.
Helps quickly and reliably with cold and damp engines that are unwilling to start. Ideal for cars, motorcycles, tractors as well as lawnmowers (diesel, 2- and 4-stroke engines) and emergency generators. Particularly stubborn lawn mowers, lawn trucks and snow blowers have caused many homeowners to break out in sweat and anger. Everything is very easy when you have starter wonders from BALLISTOL at hand. Acetone free.
Content: 0.2 l (€31.45 / 1 l)
Ideal for use on construction sites or for DL devices with high vibrations.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.