Hand tools

The all-rounder: 13 screwdriver profiles accommodated in one tool, screwdriver handle with integrated ratchet function, switchable, telescopic blade with 1/4? bit holder, adjustable from 55 to 125 mm, bit magazine contains 13 bits 1/4?: slot 4 4.5 5.5 mm , PHillips PH 1 2 3, Pozidriv PZ 1 2, TORX T10 T15 T20 T25, hexagon 4 mm, compilation of the most common bits for slotted, cross-head, Pozi and TORX screws, as well as the i6KT 4 mm bit e.g. B. for assembling Swedish kit furniture

Practical, compact spirit level with spirit level for horizontal, vertical and 45 measurements. Strong magnet ensures good adhesion to metal.

High-quality roll meter with magnetic end hook in a handy compact housing design. With precise band brake for precise internal measurements and robust steel belt clip for a secure hold. Thanks to the reinforced band beginning, lasting precision and protection against damage! Length 8m, bandwidth 25mm

For picking up small metal objects in hard-to-reach places, the light switches on and off automatically when in use, extendable up to 660mm, with fastening clip, including batteries.

For quickly and reliably magnetizing or demagnetizing all screwdrivers.

Made of high-quality, solid tool steel in the best Gedore quality

STOPPFIXX maintenance plug set "3 in 1" in red signal color for closing unpressurized lines during repairs and maintenance. Thanks to the 3 in 1 principle, the smallest plug is in the middle plug and these two are then contained in the larger maintenance plug, you always have the right diameter at hand. If the medium size M of the maintenance plugs is in use, the largest STOPPFIXX can be closed with the dust cap and the size S cannot be lost. Due to the adhesive effect, the plugs can be used continuously from 2 - 42mm!Temperature resistant from -45 to +120CSilicone-free, resistant to most oils and chemicals.

With flat slider, surface-hardened aluminum (HRc 62), black anodized easy-to-read laser marking with vernier 0.05 mm

High-quality chalk line device made of die-cast magnesium. Freewheel function for ~ Cord extension, cord length: 30m, breaking force max. 234 N, stainless steel belt clip. Promotional set with 250g chalk.

HSS-Co · Form B · Typ VA · nitriert und vaporisiert · Blauring · geradegenutet · Flanken hinterschliffen · metrisches ISO-Gewinde · DIN 13 Blatt 1 · Toleranzfeld ISO2 (6H) · mit Schälanschnitt für Durchgangsgewinde · für rost-, säure- und hitzebeständige Stähle bis 1000 N/mm² Festigkeit

50m roll.

With steel handle.

Length 400 mm, shaft 23x13 mm.

180mm.

With soft touch, made of stainless steel, rust-proof, precise work thanks to ergonomic 2-component plastic handle. Non-slip, therefore fatigue-free work, with thumb and index finger groove, with straight neck, high-quality workmanship for long, problem-free use

​The problem solver and helper for clicking onto any standard wooden meter stick. Made of plastic. Color turquoise.Supplied without meter stick!

​2-stroke oil mixing container, helps to produce the correct 2-stroke mixture quickly and precisely, Scales for ratios of 2 %, 3 %, 5 % and 8 %. Contents 500 ml

The mechanic's stethoscope helps you localize sounds. Both mechanical damage to the engine and transmission or a squeaking from the belt drive. By screwing on the extension you can also reach deep places in the vehicle.

10 pieces HSS bi-metal Iron saw blade with 24 teeth / inch, high cutting speed and long service life, serrated on one side, teeth made of HSS (DIN 1.3343), hardness 63 - 65 HRC, < br>milled and corrugatedblade body made of spring steel (50 HRC)

Very robust design, for 30 cm saw blade.

completely made of die-cast aluminum, high sawing comfort thanks to the ergonomic shape and low weight of 650 g, with knuckle protection and soft rubber hand and front handle, integrated "tensioning key" Possibility of alternative blade tension at 45 and 90 degrees for flush cuts, maximum tension of the Blade of 800 N is guaranteed,other technical properties ~Design: die-cast aluminum

Design according to DIN 3113, Form A, ISO 3318, ISO 7738. Ring side angled 15. Jaw position 15. Surface matt satin chrome plated. Chrome vanadium steel. In the holder.Contents: 10,11,12,13,14,17,19,22,24,27,30,32 mm.

Design according to DIN 3113, Form A, ISO 3318, ISO 7738. Ring side angled 15. Jaw position 15. Surface matt satin chrome plated. Chrome vanadium steel. In the holder.Contents: 8,9,10,11,13,14,17,19 mm.

Design according to DIN 838, ISO 3318, ISO 1085, ISO 10104. 5 offset. With thin-walled rings. Chrome vanadium steel. Surface matt satin chrome plated. In the holder.Contents: 6x7.8x9.10x11.12x13.14x15.16x17.18x19.20x22.21x23.24x27.25x28.30x32 mm.