Automotive specialty tool
The 12-piece Precision mechanic set is a must for every mechanic. It consists of 2 slotted screwdrivers, 2 Phillips screwdrivers, 4 profile screwdrivers and 4 hooks. These are equipped with a 2-component handle. Length 170mm.
Wheel cross with forged center piece for tough cases! Sizes: 27x30x32x3/4 inch - square, leg length 37 cm. Ideal for use in agriculture or in the truck sector.
The radial seal assembly and disassembly set enables easy, non-destructive assembly and disassembly of radial seal rings. The new radial sealing rings are pressed into their correct position using the various anodized adapter rings. The included puller is used to remove the radial sealing rings. This tool set can be used universally for diameters from 21.5 to 64 mm.Scope of delivery:7 aluminum adapters for pressing in the radial sealing rings5 large adapters 7 adapter rings for the most common central screws (M8, M10, M12, M14, M16, M18 and M20) 1 puller for removing stuck radial sealing rings
Chrome-plated special brake line wrench with reinforced hexagonal openings and double offset. Length 175 mm, wrench sizes 10 mm and 11 mm.
The spring compressor set with plastic protective inserts is ideal for assembling and dismantling the McPherson springs on the front and rear axles. A spacer is available for springs that taper in one direction. This means that small and large penholders can be used together. The spacer causes an offset of 30 mm. The plastic protective inserts prevent the spring coating from being accidentally scratched, thus reducing the risk of rust and the spring breaking again. The different pairs of spring holders with a diameter of 60 mm - 21.2 cm enable use on many types of vehicles such as BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi /strong> etc. The spring compressor has a maximum clamping force of 1500 kg, a working distance of 30 cm and is not suitable for impact wrench operation. for quick and professional removal and installation of spring struts< /li>suitable for most McPherson struts with conical and cylindrical springs
Set with sizes 8x10, 11x13, 14x15, 17x19 and 21x22mm. The keys are made of chrome/vanadium, matt chrome-plated and cold forged, delivered in the practical Tetron roll-up bag.
With non-slip fabric tape for all round screw connections and filters, also suitable for stiff filters.Span width up to 140mm, length of tape 220mm
With solid fabric tape, ideal for changing filters for any car.
Practical tool for replacing lost screws, nails etc. With practical clip. Total length max. 65 cm.
The wheel cross 17, 19, 22 mm and 13/16” HM is a reliable tool for changing tires quickly and safely. Made from high-quality carbide steel, it impresses with its stability and durability. The four wrench widths cover the most common wheel nuts and make the wheel cross versatile - whether for cars, trailers or agricultural vehicles. Thanks to its compact design, it sits comfortably in the hand and offers optimum leverage. Perfect for the workshop, yard or roadside assistance!High-quality special steelCommon wrench sizesIdeal for changing tiresIndispensable in every vehicle
High-quality thread cutting set especially for fine threads made of tungsten steel.Sizes and pitches: M2 x 0.4 - M3 x 0.5 - M4 x 0.7 - M5 x 0.8 - M6 x 1.0 - M6 x 0.75 - M7 x 1.0 - M7 x 0.75 - M8 x 0.75 - M8 x 1.0 - M8 x 1.25 - M9 x 0.75 - M9 x 1.0 - M9 x 1.25 - M10 x 0.75 - M10 x 1.0 - M10 x 1.25 - M10 x 1.5 - M11 x 0.75 - M11 x 1.0 - M11 x 1.25 - M11 x 1.5 - M12 x 0.75 - M12 x 1.0 - M12 x 1.25 - M12 x 1.5 - M12 x 1.75 - M14 x 1.0 - M14 x 1.25 - M14 x 1.5 - M14 x 2.0 - M16 x 1.0 - M16 x 1.5 - M16 x 2.0 - M18x1.5
Inexpensive torque wrench with 45 - 210 Nm adjustment range. "~ Drive, switchable right and left, with ratchet function. Complete set with key, extension, plastic case and - 3/8"~ Adapter. Ideal for changing wheels in private areas.
Ratchet mechanism and changeover from right-hand to left-hand gear. Technical data:Drive, 1/4" min. Torque 6 Nm - max. torque 30 NmAutomatic short release: Clear audible and perceptible click signal when the preselected torque is reached, calibrated and final tested. Simple preselection of the torque by turning the knurled ring. The position is then fixed by the insertion ringPractical unlocking mechanism: the attachment is firmly in place and releases automatically at the push of a buttonSturdy, oval shaft made of steel. With optimum rust protection: 2x nickel-plated, then matt chrome-platedCalibrated and tested piece by piece. With permanently lasered serial number for identificationClearly legible analog display for the preselected torqueErgonomic handle that is automatically centered due to its shape. Important for precise triggeringAdditional micro-scale for fine adjustment
Lighting tester/tester for 7-pin plugs and sockets. Indicates possible cable defects on the vehicle or trailer in a flash, LED display (without battery).
This lighting tester makes it possible to quickly and easily check the 12V electrical system on trailers and towing vehicles. Thanks to the included adapters, suitable for 7 &~ 13 pin connectors. Battery 9V block (not included).
The universal brake piston reset tool set is a comprehensive range for resetting the brake pistons of all common car brands. The included clockwise spindle brake piston resetter pushes the pistons back gently and evenly. This means that no damage to seals or anything else is caused by uneven pressure.Scope of delivery:0 = General Motors2 =CitronXM , Xantia and others3 =Alfa Romeo, Audi, Austin, BMW, Ford, Honda, Jaguar, Mercedes-Benz, Mitsubishi, Nissan, Rover, Toyota, VW4 =Alfa Romeo 164 2.0, Ford, Mazda, Saab 9000, Subaru5 = Adapter with 19 mm (3/8?) internal square drive6 =Nissan Primera, < strong>VWGolf IV7 =Audi 80, 90, V8 + 100, Ford Sierra ABS + Scorpio from '85, Honda Prelude, Nissan Sivia 1.8 turbo, Rover 8000, Saab 9000, Subaru L+Z, VW Golf and Passat8 and 9 =General MotorsN =RenaultG =Opel
With a slim design and built-in Li-Ion battery 3.7V 2Ah. Includes strong magnet and ball joint on the lamp base. With battery charge and status display. Charge via Micro USB charging socket, charging cable included. Luminous current dimmable 30-400 lumens, COB LED light source 5W. Dimensions: 34x378 mm
Only first-class tools: 12-piece combination wrench set, combination pliers 180 mm, water pump pliers 240 mm, hexagon sockets made of CrV steel, high-gloss chrome-plated with 1/2? drive, ratchet with 1-finger switch, Handles oil-acid resistant. Locksmith's hammer 300 g, in a practical case.
The BRILLIANT TOOLS unlocking tool set BT511230 is indispensable for all mechatronics engineers and automotive electricians.The universal range is suitable for almost all vehicles, including motorcycles or trucks, and will help you with loosening or repairs of cable or plug connections without damaging them.Connection defects caused by corrosion on the ABS, climate sensors, Parc Distance Control (PDC) sensors, trailer coupling module, etc. are common sources of error that can be quickly remedied with the appropriate unlocking tool can. ~To save space, the set can be stored in the workshop trolley. This means you always have all your tools together and ready to hand.
Suitable for checking pressure and vacuum systems such as checking boost pressure, vacuum solenoid valves, tank ventilation, MAP sensors, etc. Can also be used for brake bleedingNot suitable for fuel systems (petrol/diesel) 63.5 mm pressure/vacuum pressure gaugePressure display range 0 to 3 barVacuum display range -0 to -1 barMax. Negative pressure -0.7 barMax. Pressure 3 bar
Compact container with 30l capacity. Funnel diameter 420mm, tube (adjustable) : 50mm. Minimum height 680mm, maximum height 1650mm. With 4 wheels for easy transport (wheel diameter 60mm)
The windshield wiper arm puller allows many common wiper arms to be removed with absolutely no problem. Best possible use for corroded and stuck wiper arms.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.