Clamping tools
Unsere Angebote
Compact, versatile vacuum cleaner in dust class L with integrated filter cleaningQuick coupling of metaBOXes with tools and accessories on the vacuum cleaner for easy location changesWet/dry vacuum cleaner with commercial approvalFor vacuuming on power tools and for cleaning construction sites, workshops, etc.Power socket for a power tool for using the vacuum cleaner's automatic on/off switch PressClean: manual filter cleaning by means of a strong air flow when the switch on the vacuum cleaner is pressed during breaks in workUser protection: certified according to the EU standard for dust of dust class LSuction stop during wet vacuuming when the maximum filling level is reachedAutomatic overrun for completely emptying the suction hoseAntistatic basic equipment prevented static charge when using the appropriate accessoriesEasy transport thanks to cable and hose holder as well as depot for pipes and nozzlesPractical accessories depot and storage areaPractical accessories compartment with hinged lid for small partsIncluded vacuum accessories with quick system for quick conversion in use ~Characteristics:Air output max.: 4200 l/min Negative pressure: 225 hPa (mbar) Filter area: 3500 cm Absorption capacity max.: 1200 WContainer volume: 30 lSuction hose : 32 mmHose length: 3.2 mWeight: 10.8 kgCable length: 5.5 mNoise emission Sound pressure level: 78 dB(A) Measurement uncertainty K: 2.5 dB(A) ~Scope of delivery:Suction hose Quick ( 32 mm / 3.2 m)Connection sleeve Quick 28/35 mmHandle adapter Quick Professional3 suction tubes made of plastic, fleece filter bag, crevice nozzle, floor nozzle (300 mm wide), suction nozzle (120 mm wide) ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger
For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar
Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm
Milwaukee cordless jigsaw - Chip blowing device Supplied without battery and charger (FAIE NR. 125562)FIXTEC™ quick-change saw blade systemTool-free adjustment of the base platePlastic sliding soleplate to protect the material surfacePowerful motor with 2800 min-¹REDLINK™ electronics - overload protection for long battery, motor and gearbox service lifeFIXTEC™ quick-change saw blade systemTool-free adjustment of the base plate for cuts from 0-45°4-way pendulum stroke adjustment + neutral position for high cutting performanceLED work lightingPlastic sliding sole to protect the material surfaceTechnical dataVoltage: 18VBattery: Li-ionStandard equipment | Scope of delivery: Plastic guide sole, jigsaw blade, adapter for dust extraction, dust coverWeight with battery: 2.5 kgMax. Cutting capacity in wood: 135 mmSupplied without battery and charger
Milwaukee cordless planer with cutting depth adjustment Supplied without battery and charger (FAIE NR. 125562)Angle fenceChip ejection right or leftHandy cordless planer with 4-pole motor for maximum power in a compact designREDLINK™ electronics - overload protection in the machine and battery ensures a long service lifeThe REDLITHIUM™ ION battery offers a perfectly coordinated design, advanced electronics and loss-free power output Fast work progress thanks to carbide reversible bladesPrecise surface processing thanks to cutting depth adjustment up to 2.0 mmFolding depth of up to 10.7 mmChip ejection optionally on the left or rightMotor brake and foldable stand for safe storageConnection on both sides for dust bag or external extraction systemSingle cell monitoring for optimized service life and long battery life100% system-compatible with the MILWAUKEE®-M18™ product rangeScope of delivery: Rip fence, angle fence, chip bagTechnical data:Voltage: 18VStandard equipment | Scope of delivery: Rip fence, angle fence, chip bagWeight with battery: 2.7 kgCutting width: 82 mm
Milwaukee cordless polisher - Speed preselection from 360 - 2,200 min-1 Supplied without battery and charger (FAIE NR. 125562)Removable dust coverBow handle, 3-stage adjustableCordless polisher with 8-stage speed control from 360 - 2200 rpmExcellent runtime for polishing a full size car per battery charge (with moderate to good paint, light scratches)Maximum polishing accessory diameter of 180 mmConstant speed electronics with soft start for smooth start-upRemovable dust guard prevents the ingress of dirt and extends the service life of the motorRubber-coated gear housing for greater comfort, especially when working vertically with the toolThe lock-on function offers more comfort when polishing over a longer period of timeBall handle with 3 positions for better tool controlLine lock-out function to prevent automatic switch-on after a battery changeBrushless POWERSTATE® motor for ultimate mobility when car polishingREDLINK PLUS™ intelligence system provides advanced digital overload protection for tool and battery Technical data:Voltage: 18VSpindle diameter: M 14Standard equipment | Scope of delivery: Polishing plate, AVS additional handle, bow handleWeight with battery: 2.2 kg
With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm
The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)
Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv
All Products
Practical turntable for easy use of the vice on long workpieces. Forged from steel. Suitable for vice HM 125.
with ergonomic 3-component power handle ~Slide rail and fixed bracket made of cold-drawn, tempered hollow section steel, ~Sliding part drop-forged ~tempered and galvanized ~
Practical pliers clamp with movable support and strong steel spring.
Easy-to-use hand stapler made of impact-resistant plastic. Suitable for simpler work in the home and garden. Easily processes staples up to 10 mm.
The small hand tacker with high-quality ABS plastic housing for universal use.Processes fine wire staples from 4 to 10 mmHandles hammer tacker staples HHandle lock for storage when not in useClearly visible staple level indicatorUnderloading mechanism with safety release for quick reloadingLoading capacity: 150 x fine wire staple A type 53150 x fine wire staple H type 37Materials that can be processed: Fabrics/ textiles/ upholstery/ carpetsHandle lockClamp viewing windowSafety release
very practical hand tacker made of high-quality plastic housing for universal use, processes fine wire staples up to 10 mm in length and also the hammer tacker staple H.Suitable for everything that can be fastened with a staple, for example for fastening fabrics or ~< br>quick covering of picture frames, with a clip viewing window to see the current filling level of the stapler. Weight: 215 gQuick loading system: bottom loading mechanism with safety release for easy filling of the staple magazineHandle lock for storage when not in useStaple length/type up to : A/4-10 mm Type 53
The small professional tacker with durable, particularly low-recoil zinc die-cast housing for a wide range of household tasks,DIY and in the workshop.Processes fine wire and flat wire staples from 4 to 10 mmHandles hammer tacker staples H and GEasy change between fine wire staples and flat wire staples using the sliding mechanismErgonomic soft grip lever for comfortable workingHandle lock for storage when not in useClearly visible staple level indicatorUnderloading mechanism with safety release for quick reloadingFor precise results, the design line on the front of the tacker indicates the exact staple exitLoading capacity:150 x fine wire staple A type 5385 x flat wire staple D type 53F150 x fine wire staple H type 3785 x flat wire staple G type 11Materials that can be processed:Fabrics/ textiles/ upholstery/ carpetsSoft plastic sheets (2-10 mm)Leather/ imitation leatherfoilsPaper/ cardboardWax/ oiled paperBonding mats (glass wool)Aluminum laminationsSealing rails/ stripsCork panels (2-10 mm)Handle interlockClamp viewing windowSafety releaseStaple exit indicator
4 pieces, 2 pieces length 150 mm, 2 pieces length 250 mm.
Machine vice made of highly tempered machine cast. Jaw width: 100mm, clamping width: 80mm
arallel vice made of forged C45 steel with welded-in tubular clamping jaws. Jaws and anvil induction hardened. With measuring scale for quick presetting of the clamping width. Very high-quality design for all types of work. Turntables and height adjusters are available as accessories.
Practical tool for easily working with pipes up to 2" in diameter.Forged from high-quality steel, this tool features a hinged design with self-closing locking hooks for easy operation and a secure hold.Dimensions: 275 x 265 x 90 mm (L x W x H)Weight: approx. 5 kg
Jaw width 125 mm, clamping width 120 mm.
Suitable for the staplers listed. Made of steel, galvanized, 1080 pieces, type 53. Width 11.4x0.75mm.
Hardened steel parallel vice including turntable100 mm clamping jaws with milled teeth, with anvil,precise spindle guiderotatable
4-piece clamp set with 2 pieces each 400 mm and 600 mm, projection 120 mm.
Forged steel, clamping jaws, anvil and guide rail additionally surface-hardened, precision trapezoidal thread, adjustable guide. With measuring holder for quick presetting and holder for pipe clamping jaws.
Quality vice forged from steel. With anvils for smaller blacksmith work. Professional model including surface-hardened clamping packs with milled teeth for the secure hold of pipes and the like. Span width: 125mm, jaw width: 125mm, weight: 10.5 kg.
Compact vise made of high-quality welded steel, with hardened steel jaws and a large anvil.Adjustable guide.Ideal for universal use.
Our product manager
Bernhard Schuster
Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
