Percussion tools & files

Unsere Angebote

-16 %

#FA127546

Unicraft Battery starter SB 501

Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction

€399.90* €474.00* (15.63% saved)

-8 %

#FA128486

Aircraft Compressed air hose reel DST 8/32 30m rotatable

For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar

€119.90* €129.95* (7.73% saved)

-15 %

#FA124942

Milwaukee Cordless angle grinder 18V FSAG125X loose

Powerful angle grinder - FIXTEC™ quick-change system for changing discs without tools Supplied without rechargeable battery and charger (case no. 125562)Replaceable dust guard prevents the ingress of dirt and thus extends the service life of the machineTool-free guard adjustment enables large cutting capacitiesCorded power similar to a 1200 W angle grinderReduced gearbox size and lower battery holder angle - for better balance and ergonomics compared to the previous modelAnti-vibration side handle for low vibrationFIXTEC™ quick-change system for tool-free disc changesSlim handle designReplaceable dust guard prevents the ingress of dirt and thus extends the service life of the machine125 mm tool-free guard adjustment enables large cutting capacitiesRestart protection for high user protection Technical dataVoltage: 18VBattery: Li-ion Spindle diameter: M14Standard equipment | Scope of delivery: replaceable dust guard, protective cover, anti-vibration side handle, flange, flange nut, wrench, quick-release clampWeight with battery: 2.7 kg Max. Cutting depth: 33 mm

€299.95* €352.80* (14.98% saved)

-14 %

#FA129139

Milwaukee Drill cassette SDS+MX4 7-piece

With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm

€57.95* €67.50* (14.15% saved)

-17 %

#FA61225

Aircraft Holding device f. knife f. 54609

€47.90* €57.90* (17.27% saved)

-23 %

#FA129102

Milwaukee HSS-G 25-piece drill bit cassette Thunderweb

THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.

€99.95* €129.90* (23.06% saved)

-5 %

#FA126047

EINHELL Kompressor TC-AC 420/50/10 V

The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)

€339.90* €358.00* (5.06% saved)

-13 %

#FA127601

Aircraft Mobilboy 261/24T E compressor

Compressed air extraction via one-hand quick couplingFully automatic on/off operation via pressure switchOne pressure gauge each for displaying the tank and working pressureElectric motor equipped with circuit breakerPowder-coated compressed air tankTwo plastic wheels at the rearTechnical data: Length: approx. 590 mm Width/depth: approx. 280 mm Height: approx. 600 mm Weight (net): approx. 25 kg Electrical data: Connection voltage: 230 V Mains frequency: 50 Hz Driv

€199.95* €229.90* (13.03% saved)

-42 %

#FA131010

Pro-Compact 5 m tape measure

Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.

€12.95* €22.20* (41.67% saved)

-20 %

#FA128143

Aircraft PSM3 Pro Mini polishing sander

Mini polishing sander - precision in a small formatIdeal for fine polishing and sanding work in hard-to-reach areas. Whether in the workshop, on the car or for DIY projects - the compact mini polishing sander ensures perfect results. Thanks to its handy size and powerful motor, it is versatile and enables precise work even on sensitive surfaces. Included in the scope of delivery: Velcro pad 76 mm, one soft and one hard polishing sponge 90 mm as well as a lambskin polishing pad with 80 mmTechnical data:Average air requirement: approx. 340 l/min Working pressure: 6.3 barConnection thread: ¼” Mounting spindle: M6

€199.95* €249.90* (19.99% saved)

All Products

#FA103282

Tecwerk Soft-face mallet Simplex 60 mm

The soft-face mallet is a 2-part clamping housing made of malleable cast iron Impact inserts and Simplex handle can be easily replaced by loosening or tightening the hexagon socket clamping screw, with 1 impact insert each made of rubber composition, black medium-hard and superplastic white medium-hard Areas of application:Paving work, setting kerbstones, setting facing blocks, scaffolding, tent and hall construction, gardening and landscaping, housing assembly, prefabricated house construction, carpentry, fence construction, hammering in split wedges Inserts: Rubber black/superplastic whiteImpact: medium hardHandle: Wood

€69.90*

#26058

Abrasive fleece 229x152mm

Version: mittel

Premium fleece with a long service life

Variants from €2.36*

From €3.59*

to the product

#327

Tecwerk Brass hand wire brush

Version: 5-reihig

Fine, soft and wavy brass wire.

Variants from €5.79*

€6.95*

#FA56985

Chisel set, 4 pieces.

In sizes 10, 16, 20 and 26 mm, wooden handle.

€29.99*

#6388

Combined riveting tools

Ø: 5,0

Air hardened, rivet head maker and rivet puller in one.

Variants from €25.90*

€25.90*

#FA9106

Dengel hammer with handle, 500 g

Classic dengel hammer, weight 500g

€39.95*

#FA131593

Depth hole marker set HM

A practical and affordable solution for marking drill holes up to 40 mm deep.Practical marker with a clip and integrated lead sharpener.Promotional set with two graphite leads and two wax leads each (yellow and red).

€11.99*

#66590

EasyCut sandpaper

Grain size: 150

Practical universal sandpaper roll 115 mm x 4.5 meters.

Variants from €4.95*

€5.99*

#FA324

Tecwerk File brush, 115x40

This brush belongs in every workshop for cleaning files, improves the removal performance of the file and thus shortens your working time and increases the service life of your files

€3.99*

#FA70737

Tecwerk File set 200mm 5 pieces

Files with a length of 200mm made of high-quality steel, in a plastic bag ~Contents: 1 each flat blunt, half-round, round, triangular file and a half-round rasp.All equipped with a high-quality 2-component handle.

€27.90*

#FA46911

Tecwerk File set length 250 mm cut 2 2K-Ergo

Made of high-quality steel, contents: flat, half-round, round, triangular, rasp half-round

€39.95*

#92748

Tecwerk Fist hickory handle DIN6475

Weight (g): 1000

Painted mitten in black finish

Variants from €19.95*

€19.95*

#FA6412

Tecwerk grains

Air hardened, chrome vanadium, 120mm.

€4.99*

#FA57597

HM MÜLLNER Hammer set professional, 3 pieces.

1 quality hammer each with 100, 300 and 500 g.

€24.95*

#FA97092

Hand wire brush set, 3 pieces.

3 piece set with ergonomic handles. Steel and brass versions for universal use. Length 225mm

€6.99*

#57248

Tecwerk Hand wire brush stainless steel

Version: 3-reihig

Ideal for processing non-rusting materials, longer service life compared to steel brushes.

Variants from €4.99*

€4.99*

#322

Tecwerk Hand wire brush, steel wire

Version: 3-reihig

Standard wire brush with steel bristles approx. 25 mm long and wooden handle

Variants from €2.99*

€2.99*

#FA15609

Handle fastening wedges metal

5 pieces per pack, five different sizes, double-sided, claw-like teeth, the teeth spread apart when driven in, ensuring the handle sits firmly, for fitting handles to axes, hoes and hammers.SFIX Hammer Wedge

€11.95*

#FA23982

Stubai Handle fixing wedges PVC, 8 pieces

Tear-off wedges for easy and secure attachment of handles to axes, hatchets, hammers, etc.

€10.95*

#FA97344

Stubai Handle wedges ring wedges metal 10 pieces

Safety handle fastening wedges for wedging axes, hatchets, hammers, etc., 5 pieces each with an outer diameter of 15 and 17 mm

€10.95*

#FA38752

lath hammer

Professional slat hammer with an unbreakable handle made of special plastic with a fiberglass core.

€39.90*

#FA53957

Gedore lath hammer

Professional hammer with head and handle forged in one piece. Balanced weight distribution for high impact power and optimal handling. Version with magnetic nail holder. Length 340 mm, weight 765 g.

€79.95*

#FA6834

lath hammer

Blank head with metal handle and rubber handle, 600 g, hammer blank, nail insert.

€16.95*

#FA134152

Tecwerk lath hammer with magnet

Drop-forged, hardened, and tempered · Black-lacquered head · Shaft and tiller polished to a high gloss · Edges chamfered according to specifications · With unbreakable multi-component nylon shaft

€26.99*

Seite 1 von 2

Our product manager

Bernhard Schuster

Bernhard has been with FAIE since 1988 and is THE professional when it comes to tools or house, yard and garden.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Percussion tools & files

Hammers

Punches, centers, dies

Filing, grinding, brushing

Chisels & chisels

All Products

Our product manager

Bernhard Schuster

€10 voucher.