Screw tool
High-quality combination wrenches made of CV steel in sizes 36, 41, 46 and 50. For use in business or agriculture.
Practical ring spanner set in an offset design. Made from high quality CV steel. ~ Contents: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22
Innovative Unior key set with IBEX combination wrench enables a ratchet function with the open-end wrench. Ideal for hard-to-reach places and handy work. Contents: 8, 10, 12, 13, 14, 15, 17 and 19 mm.
Professional double ring set with practical storage clip. Contents: 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19 and 20x22 mm.
(Offset), chrome vanadium, Gedore Red quality.
Complete set of keys from 6 - 32 mm in professional design. Delivered in cardboard packaging and including a PVC roll bag.
High-quality reversible ratchet with additional angle screw function. Fine-toothed gear (52 Z) makes it easy to loosen or tighten in tight spaces. The screwing work is done quickly and easily by turning the handle.
High-quality screwdriver bit in a long design
High-quality industrial design made from the best tool steel
High-quality screwdriver set in industrial quality.Ideal for the workshop - whether in motor vehicles, construction machinery or assembly use.All sockets in a multi-tooth design for a perfect hold, even with slightly worn and stuck screws.Sockets in lengths 55, 100, 140 and 200mm.Contents:Screwdriver bits, drive 1/2", length 55mm Multi-tooth - M5, M6, M8, M9 , M10, M12, M14, M16Screwdriver bits, drive 1/2", length 100 mm ~ ~ ~ Multi-tooth - M5, M6, M8, M9, M10, M12, M14Screwdriver bits, drive 1/2", length 140 mm ~ ~ Multi-tooth - M5, M6, M8, M9, M10, M12, M14Screwdriver bits, drive 1/2", length 200 mm ~ ~ ~ Multi-tooth - M8, M10, M12, M14
Compilations that no toolbox should be without. Complete original equipment for fitters and service technicians.Ergonomic design for good working: Rounded two-component handle shape with flexible "FLEX-DOT®" nubs for fatigue- and pain-free working. Good grip when gripping quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical application.Oil and acid-resistant special rubber handle that does not stick.Finger recesses for more "grip" when turning quickly.Clear size markings thanks to laser marking on matt chrome-plated shafts made of special chrome-silicon-manganese-molybdenum alloyed steel.Machined black tip for maximum precision when picking up screws. Reduces slipping of the tool.Slot: 3.0 - 4.0 - 5.5 - 6.5PH 1 - PH 2
Compilations that no toolbox should be without. Complete original equipment for fitters and service technicians.Ergonomic design for good working: Rounded two-component handle shape with flexible "FLEX-DOT®" nubs for fatigue- and pain-free working. Good grip when gripping quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical application.Oil and acid-resistant special rubber handle that does not stick.Finger recesses for more "grip" when turning quickly.Clear size markings thanks to laser marking on matt chrome-plated shafts made of special chrome-silicon-manganese-molybdenum alloyed steel.Machined black tip for maximum precision when picking up screws. Reduces slipping of the tool.Slot: 3.0 - 4.0 - 5.5 - 6.5PZ 1 - PZ 2
For slotted and cross-head screws PZ3-component handle PowerPositive connection for optimal power transmissionIndustrial quality
Set of 6 common screwdrivers made of CV steelPH1 x 80 mm, PH2 x 100 mmFL3.0 x 0.5 x 75 mm, FL4.0 x 0.8 x 100 mm, FL5 .5 x 1.0 x 125 mmVoltage tester 140 mm, FL3.0 x 0.5 x 65 mm, 125-250 V
Compilations that should be in every toolbox. Complete original equipment for fitters and service technicians.Ergonomic design for good work: Rounded two-component handle shape with flexible "FLEX-DOT" nubs for fatigue-free and pain-free work. Good grip when reaching quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical approach.Oil and acid-resistant special rubber handle that does not stick.Finger grooves for more "grip" when turning quickly.Clear size information thanks to laser marking on matt chrome-plated shafts Made of chrome-silicon-manganese-molybdenum alloyed special steel.Machined black tip for maximum precision when holding screws. Reduces tool slipping. Delivered in red or black
Praktische Satzzusammenstellung in umweltfreundlicher Kartonverpackung. Für Innen-TX Schrauben. 3-Komponenten-Griff Power-Grip³ mit Aufhängeloch. Ergonomische Griffform für präzises, ermüdungsfreies Arbeiten. Formschlüssige Verbindung von Griff und Klinge für optimale Kraftübertragung. Antriebsform-Markierung am Griffende. Klinge aus Molybdän-Vanadium-Stahl, vergütet 2163 TX T10 T15 T20 T25 T30
Compilations that no toolbox should be without. Complete original equipment for fitters and service technicians.Ergonomic design for good working: Rounded two-component handle shape with flexible "FLEX-DOT®" nubs for fatigue- and pain-free working. Good grip when gripping quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical application.Oil and acid-resistant special rubber handle that does not stick.Finger recesses for more "grip" when turning quickly.Clear size markings thanks to laser marking on matt chrome-plated shafts made of special chrome-silicon-manganese-molybdenum alloyed steel.Machined black tip for maximum precision when picking up screws. Reduces slipping of the tool.HX 2.5 - HX 3 - HX 4 - HX 5 - HX 6 - HX 8
with ergonomic multi-component Kraftform handles with roll-off protection.Blades made of molybdenum-vanadium steel nicromatt with laser tip tip "bites" into the screw head and prevents it from slipping out of the screw head and protects against expensive slips Most of the required contact pressure is eliminated Captive size guide system at the end of the handle as a time-saving identification aid for the respective type of screwContents:1 screwdriver each for slotted screws, 3.5 x 100 mm, 4.0 x 100 mm, 6.5 x 150 mm1 screwdriver each for screws with Phillips (PH), size. 1/80 mm, 2/100 mm, 3/150 mm1 screwdriver each for screws with Phillips (PZD), size. 1/80 mm, 2/100 mm, 3/150 mm1 screwdriver each for screws with TORX inner profile size. T 10 - T 15 - T 20 - T 25 - T 30** without laser tip Delivered complete with wall holder.
Compilations that should be in every toolbox. Complete original equipment for fitters and service technicians.Ergonomic design for good work: Rounded two-component handle shape with flexible "FLEX-DOT" nubs for fatigue-free and pain-free work. Good grip when reaching quickly. High torque and pressure forces thanks to balanced design for horizontal and vertical approach.Oil and acid-resistant special rubber handle that does not stick.Finger grooves for more "grip" when turning quickly.Clear size information thanks to laser marking on matt chrome-plated shafts Made of chrome-silicon-manganese-molybdenum alloyed special steel.Machined black tip for maximum precision when holding screws. Reduces tool slipping. Delivered in red or black
Professional screwdriver with 2-component handle, up to 1000V, insulated.
Very robust screwdrivers with impact cap and additional hexagon drive for tough use. Practical combination with slot 4,5,5,5,6,5 and 8mm as well as cross PH 1 and 2.
Complete set with high-quality screwdrivers with ergonomic multi-component Kraftform handles with hexagonal roll-off protection. Equipped with practically all common screwdrivers, with innovative Laser Tip tips for even better grip when screwing. Blades made of extremely strong molybdenum - vanadium steel. Delivery sorted in elegant transport packaging including a practical wall bracket.Contents:1 screwdriver each, VDE-insulated for slotted screws 2.5 x 80 mm - 3.5 x 100 mm1 voltage tester 3.0 x 70 mm1 screwdriver for slotted screws, 4.0 x 100 mm1 each Screwdriver for slotted screws with continuous hexagonal blade, impact cap and hexagonal attachment, 5.5 x 100 - 7.0 x 125 mm, with BlackPoint tip and key aid (for screwing, chiseling and prying)1 screwdriver for screws with Phillips head (PH), size. 2 x 100 mm1 screwdriver each for screws with Phillips (PZD), size. 1 x 80 - 2 x 100 mm1 screwdriver each for screws with inner TORX profile, size. T15 - T20 - T25
Screwdriver with 3-component handle and hardened blade. Contents: slot 4, 5.5, 6.5 and 8 mm, cross PH1 and PH2.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.