Large appliance accessories
Compressor oil 1 liter
Can be used for any compressor.
Compressor unit MK 102
Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.
Compressor unit MK 103
Cast iron compressor with 2 cylinders and aftercooler, suction capacity 365 L/min, speed 1370 rpm, required. Motor power 2.2 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.75 L.
Condor pressure switch with motor protection
Switch-off pressure adjustable from 3 to 11 bar. 4 connections 1/4". With relief valve. For 400 volts
Contact spray
This spray removes oil, dirt, flux and oxidation residues from sensitive electrical or electronic devices. It penetrates even hard-to-reach areas and dries quickly without leaving any residue. 400ml.
Content: 0.4 l (€27.53 / 1 l)
Contact spray 400ml
Displaces moisture and ensures good contact with switches, relays, lights, etc. Simply spray switch contacts (do not rinse), product evaporates and ensures lasting good contact.
Contact tube MB25 � 0.8mm
Original Elmag spare part
Contact tube MB25 � 1.0mm
Wire nozzle MB25 / MB36, length 28mm, outside 8mm, M6, 1.0mm
Copper spray 400ml
weather-resistant, quick-drying and copper-colored coating for many surfaces with corrosion protection, abrasion, scratch and brush resistant for repairing damaged surfaces and as a protective seal for pipes and metal structures made of copper copper flakes in the synthetic resin dispersed in fast-volatile solvents on a grease-free, clean surface Spray on and let dry for approx. 20 minutes dust dry at +20 C in approx. 10 minutes can be used in all areas of maintenance, servicing and repair for artistic forging work ~Other technical properties ~Container: spray can
Content: 0.4 l (€23.90 / 1 l)
Copper spray 500 ml
This assembly paste offers reliable protection at extreme temperatures – from -30 °C to +1,100 °C.It forms a robust lubricating and protective layer that prevents corrosion, seizing, and galling.Ideal for parts subjected to high stress, such as exhaust systems, flanges, combustion chambers, or bolted connections.Thanks to its high compressive strength, it remains adhesive and abrasion-resistant even under heavy loads.It dampens noise and vibration and noticeably facilitates installation and removal.Furthermore, it is resistant to salt water, many acids, and alkalis – perfect for use in harsh environments.Contents: 500 ml
Cylinder spray 50 ml
Cylinder spray with lubricating ceramic! Especially for the care and cleaning of cylinders and locks of all kinds. The ceramic particles it contains ensure that the mechanism is optimally lubricated and the mechanism runs smoothly again. Achieves even the tightest fits by spraying. Squeaks and creaks are eliminated. It displaces moisture and thus has a preventive effect against icing. This maintains functionality and extends the service life. Protects against rust and removes existing rust.
Content: 0.05 l (€107.00 / 1 l)
Digital Plus Tire Inflator Gauge
Professional tire inflator with digital display and a measuring accuracy of 0.01 bar, measuring range 0.2 - 10.0 bar,Excellent readability thanks to large digits and illuminated display, robust design with rubber coating and integrated hanging loop,Dustproof and waterproof to IP65.Complete with 500mm hose and quick-release fastener for one-handed attachment and removal, as well as a secure fit on the valve.
Dirt killer lance plug. DN12 with nozzle 045
Suitable for all HD pistols with a 12 mm plug-in coupling
Dirt killer with nozzle
With stainless steel pipe, 500 mm with nozzle 042.
Dirt killer with nozzle 042 D12
This accessory is only suitable for the professional Krnzle plug-in system.(Not suitable for Krnzle hobby devices (not suitable for K1050 series or : 042
DL - safety clutch
Simple bleeding at the coupling, no whipping of the hose line, easy coupling. High quality steel construction.
DL demolition chisel hammer set
Robust professional demolition hammer for wall breakthroughs and renovation work.For universal use in tiling, chipping, chiseling work, in construction and in the bodywork areaWith ergonomically shaped handle, cold-insulating and low-vibrationLength: 450 mm< br>Gross weight: 6.9 kgAverage air requirement, approx. 600 l/minImpact strength: 28 joules
DL hose 9mm/10m complete
DL hose set 10m/9mm with EURO connections, 10m cross-fabric hose blue transparent 9x14mm, completely shrunk with fitted fittings.
Content: 10 m (€1.99 / 1 m)
DL-PVC hose Softech
Commercial compressed air hose, super soft, extremely elastic and absolutely kink-resistant up to 25C. Made of 100% PVC, UV and oil resistant, making it very durable and long lasting. Completely including steel coupling and nipple.The ideal hose for tough use on the construction site, in the workshop or even at home.Technical data:Inside : 10mm< br>Outside : 15mmmax. Working pressure: 20bar
Content: 10 m (€7.00 / 1 m)
Double lance short DN12 w.nozzle low pressure without HP nozzle
Krnzle short double lance, for continuous pressure regulation on the lance - delivery without HP nozzleWith the short Krnzle double lance, the pressure on the lance can be continuously regulated by opening the nozzles. ~1. Nozzle open = high pressure1. + 2nd nozzle opened = low pressure with great flushing effectTechnical data: ~M22x1.5 AG
Drilling/cutting oil spray 400ml for non-ferrous metals
High-performance cutting oil low odor increases tool life, e.g. B. when drilling, milling, turning chisels and tapping with tool protection without aggressive additives suitable for all non-ferrous metals silicone-free spray behavior: swirling, slightly point-adjusted spray jet for targeted application of the cutting aid at the processing point combination of special active ingredients, free of chlorine-containing compounds after Spray onto the surface to be treated and allow it to evaporate can be used even for difficult machining processes particularly recommended in the area of metal processing, aluminum, steel and cast iron processing also suitable for stainless steel.
Content: 0.4 l (€13.90 / 1 l)
DU600 Electrode 3.2 x 350, 20 pcs.
Special electrode for hardfacing of tough and hard materials on machine parts such as excavator parts, mixer arms, agricultural machinery, etc.Small package containing 20 electrodes, 3.20 x 350 mm. Recommended welding current: at least 110 amps.
Electrode for build-up welding UTP DUR 600
4.00 x 450 mm, 1 package = approx. 6 kg = 94 pieces.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
