Agricultural machinery

Agricultural machinery spare parts

Hydraulic program

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

21294

Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,295.00*

-24 %

Kurbellagergehäuse hinten komplett, 281.0090

FA117928

Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

2549

Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-26 %

FA107995

Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

€1.69* €2.29* (26.2% saved)

-40 %

FA63556

Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

FA2521

Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

FA2531

Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

72983

Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

47888

Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

All Products

FA29422

Petrol filter for motor equipment

Fuel filter for line installation, can be used instead of WK31/2,Connecting nozzle offset with 6.1 and 8.1 mm.Dimensions in mm:C 32D 41H 116L 51

€7.99*

Pick-up-Zinke anstelle von Mengele 03-035653

FA7955

Pick-up tine instead of Mengele 03-035653

Pick-up tine for Mengele loader wagons for the old version of the LW and LAW series.

€2.95*

Pick-up Zinke passend zu FiatAgri, Hesston und New Holland

FA31141

Pick-up tine suitable for FiatAgri, Hesston and New Holland

Pick-up tine suitable for FiatAgri, Hesston and New Holland high-pressure balers and round balers.

€2.90*

FA116383

Pick-up tine suitable for New Holland

Pick-up tine suitable for New Holland high-pressure presses and round balers.

€4.95*

10420

Pillow block UCP complete with bearing

A (mm): 38 Bore (mm): 25 H (mm): 36,5 H0 (mm): 69,5 J (mm): 105 L (mm): 140 N (mm): 13 N1 (mm): 19

Standard version

€12.95*

Variants from €11.95*

FA29985

Pilot camp

Outer diameter 40.00 mm Inner diameter 17.00 mm Height 12.00 mm

€16.95*

FA106840

Pilot camp for Case

€28.95*

FA55260

Pin to lifting fork

18 mm, length 95 mm, for Steyr Plus

€9.95*

Rohrbogen 90° System Perrot mit Kugel und Becher inklusive Dichtring

130355

Pipe bend 90° Perrot system with ball and cup including sealing ring

Nominal size: DN 108

Galvanised 90° elbow with ball and cup suitable for the Perrot system. The gimbal ring with 2 locking hooks is attached to the cup side. The sealing ring for the cup is included in the scope of delivery.4 inch = DN 108, cup width B = 150 mm, ball diameter D = 154 mm5 inch = DN 133, cup width B = 171.5 mm, ball diameter D = 179 mm6 inch = DN 159, cup width B = 203.5 mm, ball diameter D = 210 mm8 inch = DN 216, cup width B = 287 mm, ball diameter D = 312 mm

€99.00*

53362

Pipe bend 90� with sealing ring

B (mm): 150 D (mm): 150 Nominal size: DN120 Radius R: 350 mm

Pipe bend 90 with ball and cup including sealing ring

€79.00*

Variants from €49.90*

54122

Pipe bend 90� with sealing ring, galvanized

B (mm): 145 D (mm): 145 Nominal size: HK108

€99.00*

Variants from €59.90*

48068

Gedore Pipe bending pliers with roller

Ø tube (mm): 12

For bends up to 90, for bendable steel and stainless steel pipes. Up to a maximum wall thickness of 1.5 mm.

€85.00*

53358

Pipe elbow loose 90�, black

Nominal size: DN120

Material thickness 1.2 - 1.5 mm

€27.00*

Variants from €21.90*

FA544

Pipe elbow loose 90�, black

Material thickness 2 mm

€30.90*

FA57051

Pipe linch pin � 14mm

Galvanized, with chain, 14mm , for lower link stabilizers, bolt length approx. 54mm

€3.90*

FA50683

Pipe linch pin � 16mm

Galvanized, with chain, 16mm , for lower link stabilizers, bolt length approx. 70mm

€4.95*

FA101854

Pipe linch pin for Steyr stabilizer

14x65mm, with chain

€7.99*

24287

Rübig Pipe linchpin R�big

B1 (mm): 14 B2 (mm): 17,5 mm D2 (mm): 40 L1 (mm): 45 L2 (mm): 66 Length (mm): 45 Ø: 10,5

Drop-forged shaft, galvanized, white chromated.

€4.35*

Variants from €3.80*

FA24818

Pipe painted

Length: 505mm

€109.00*

FA24829

Pipe painted

Suitable for Steyr

€76.50*

NEW

FA129521

Piston sleeve set, ø 105 mm, for MWM turbo engines

Fits only MWM turbo engines TD226-B3, TD226-B4, TD226-B6 or Steyr WD301, WD401Bore: ø 105 mmCombustion chamber diameter: ø 60 mmPiston pin: ø 35 x 88 mmPiston liner set for the overhaul of selected MWM turbo engines and Steyr engines, suitable for TD226-B3, TD226-B4, TD226-B6, WD301 and WD401, bore diameter 105 mm, combustion chamber diameter 60 mm, piston pin 35 x 88 mm.

€279.00*

FA29080

Piston/liner set for Steyr

Piston pin 40 x 93 mm, 5 rings 110 mm

€199.00*

Kolben/Büchsen/Ringsatz Ø 100 mm Bohrung

FA104344

Pistons/liners/ring set � 100 mm bore

With Steyr engine type: WD308, W408Description pistons / bushings / ring sat(NRAL Germany, GTZE) with 100 mm bore

€159.00*

Kolben/Büchsen/Ringsatz zu Steyr 8000 Serie

FA104345

Pistons/liners/ring set for Steyr 8000 series

Ring carrier, piston pin 38 x 83 mm, combustion chamber 54.8 mm,Combustion chamber depth 20.05 mm, 3 rings 100 mm Piston (Nral)Bushing (Gtze) Suitable for Steyr engine type : WD311/ WD411/ WD611

€169.00*

Page 117 of 188

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery

Vehicle construction