Agricultural machinery

Agricultural machinery spare parts

Hydraulic program

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

21294

Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,295.00*

-24 %

Kurbellagergehäuse hinten komplett, 281.0090

FA117928

Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

2549

Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-26 %

FA107995

Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

€1.69* €2.29* (26.2% saved)

-40 %

FA63556

Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

FA2521

Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

FA2531

Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

72983

Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

47888

Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

All Products

FA68772

Replacement glass SSB light Ford

rechts/links, 150x70 mm, Lochabstand 130 mm, passend zu Best-Nr. 68770 und 68771

€10.50*

117532

Replacement glass yellow/red 95x85mm

Version: right

€16.75*

FA67467

Hella Replacement glass, � 78 mm

to No. 67468

€11.85*

FA1250

Hella Replacement glass, � 78 mm

for indicator position light HELLA

€11.85*

FA40223

Replacement grease

to impact grease gun

€5.99*

Content: 0.05 kg (€119.80 / 1 kg)

75953

Replacement lens for Multipoint 5

Version: right

€17.95*

FA71429

Replacement lens for Multipoint III

Lens for Multipoint III, right/left

€17.40*

1245

Hella Replacement lens yellow/red

Version: links, mit Kennzeichenbeleuchtung

for HELLA lights with snap fastening, WxHxD: 90x80x50mm

€12.85*

Variants from €12.65*

FA57363

Replacement mirror 270x172 mm

to telescope mirror

€42.95*

FA97969

Replacement replacement for Steyr T188

without cylinder head gasket

€49.95*

FA97970

Replacement replacement for Steyr T190

without cylinder head gasket

€64.50*

FA34673

Retaining chain for drive shaft

Length 400mm

€9.55*

Content: 0.4 m (€23.88 / 1 m)

NEW

FA136297

Retaining clip for tyre levers & Steyr starter crank

Use: for tyre levers and starter cranksBore: ø 6.9 mm

€19.95*

FA99391

Retaining spring bonnet Steyr

For bonnet lid support rod

€9.90*

FA97978

Retaining spring diesel filter Steyr

Suitable for order no.: 27628item no. 23

€4.80*

1788

OMT Return filter for pipe installation, max. working pressure 10 bar

AR (inch): 1 1/4 B (mm): 133 C (mm): 256 E (mm): 50 F (mm): 29 Flow rate (l/min): 200 Length (mm): 288 Thread: R 1 1/4 Zoll Ø outside (mm): 132

Standard filtration 25 micron, with by-pass valve, 1.7 bar

€75.00*

Variants from €47.00*

Rücklauffilter für Tankeinbau, max. Arbeitsdruck 8 bar

1825

OMT Return filter for tank installation, max. working pressure 8 bar

AR (inch): 3/4 B (mm): 34 C (mm): 29 D (mm): 213 E (mm): 30 F (mm): 86 Flow rate (l/min): 100 H (mm): 67 I (mm): 115 L (mm): 9 Length (mm): 213 Thread: R 3/4 Zoll Ø outside (mm): 86

Standard filtration 10 micron, with by-pass valve, 1.7 bar

€45.00*

Variants from €32.90*

FA99350

Return spring gas linkage with pedal

Total length: 150 mmDiameter: 22 mm

€12.95*

FA127590

Return spring Steyr 1680570027

Length: 128 mmApplication: Gearshift, clutch and brake pedal on various Steyr tractors

€13.95*

Schmalschar 60x470x16 mm, anstelle von Regent 33.51.530

FA130656

iQparts Reversible cultivator point 60x470x16 mm, instead of Regent 33.51.530

The coulter, suitable for Köckerling and Regent cultivators, can be mounted on cultivator handles with a hole spacing of 44.5 to 75 mm. The cultivator coulter can be turned over.

€24.50*

45152

Frank Original Reversible point S 2 W suitable for Lemken

Version: right can be used instead of Lemken: 336.5540

The S 2 W reversible point has a material thickness of 10 mm. The point is lacquered and is supplied in a hardened and tempered version.The reversible point fits the following Lemken plough body types: BU, NBU, B, BS, C, US, W.

€21.99*

43742

iQparts Reversible share tip

Version: left can be used instead of Pöttinger: 925.13.021.0, 925.13.011.1

€20.90*

35433

Reversing gear M10 1:1

Gearbox: M10 1:1

Connection input (y): 1-3/8x6 (inner profile)~Connection output (x): 1-3/8x6~ Reversal of direction of rotation

€998.00*

FA30449

Bondioli & Pavesi Reversing gear M5, 1:1

Technical data: 22 kW, 540 rpm, 395 Nm Input connection: 1-3/8x6 (inner profile) Output connection: 1-3/8x6 1. Output shaft: direction of rotation remains the same 2nd output shaft: reversal of direction of rotationIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€598.00*

Page 134 of 188

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Agricultural machinery

Vehicle construction