Skip to main content Skip to search Skip to main navigation

Agricultural machinery


Skip product gallery

Our offer

Item number 21294
Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,295.00*
Discount -24 %
Item number FA117928
Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

Average rating of 5 out of 5 stars

Item number 2549
Cooking tines without a share

Tine material 25x8.

€8.79*
Discount -13 %
Item number FA54554
Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
Discount -26 %
Item number FA107995
Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

€1.69* €2.29* (26.2% saved)
Discount -40 %
Item number FA63556
Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
Discount -5 %
Item number FA2521
Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
Discount -10 %
Item number FA2531
Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
Item number 72983
Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
Discount -31 %
Item number 47888
Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

All Products

Item number FA116893
Stroke indicator 300mm for hydraulic top links

Lift indicator for hydraulic top links. The scale has a length of 300mm and is a self-adhesive film.

€2.65*
Item number 1198
Stroke limiter
Series / pipe Ø: 15L Thread: M 22 x 1,5

Stroke limitation of single-acting hydraulic cylinders before the end of the stroke. E.g.: tipping cylinders of truck bodies and agricultural. followers.

€41.90*

Average rating of 4.5 out of 5 stars

Item number FA24409
Strong steering handle

Suitable for all tractors (tractors) with a curved steering wheel, 30. Complete with plate and screws.

€9.50*
Item number FA4248
Stuffing box 20x27x8mm for MZ manure scraper

Stuffing box seal 20x27x8mm for the slide rod of the manure slider with mechanical manual operation. 2 pieces are required for sealing.

€0.50*

Average rating of 2.5 out of 5 stars

Item number 62040
Stuffing box nut with grease nipple
Length (mm): 40 Thread: M 30 x 2,0 Version: zu 4 Zoll Gülleschieber Ø inside (mm): 20

For use on sliders with lever set.

€9.59*

Average rating of 5 out of 5 stars

Item number 18783
OMT Suction filter 90 micron for tank installation
B (mm): 105 C (mm): 46 CH (mm): 30 Flow rate (l/min): 22 Thread A: R 1/2 Zoll

Standard filtration 90 micron.

€14.90*

Average rating of 4 out of 5 stars

Item number 1775
OMT Suction filter for pipe installation
C (mm): 212 Flow rate (l/min): 80 Length (mm): 234 Thread: R 3/4 Zoll Ø outside (mm): 98

Standard filtration 25 micron, with by-pass valvem 0.25 bar

€59.00*
Variants from €45.90*

Average rating of 5 out of 5 stars

Item number FA24464
Suction filter PVC for PTO pump MT20/25

With double crossed relief networking. Hose connection 30 mm, height 60 mm, outer 140 mm.

€7.99*
Item number FA54500
Suction filter PVC for PTO pump MT300

Hose connection 40 mm, height 96 mm, outer 150 mm.

€8.95*
Item number FA62595
Suction nozzle ball DN150

Hose connection 150 mm, to quick coupler

€49.90*
Item number FA17340
Suction nozzle ball DN159

Hose connection 125 mm

€51.90*
Item number FA62597
Suction nozzle ball DN159

Hose connection 150 mm

€59.00*

Average rating of 5 out of 5 stars

Item number 53369
Suction nozzle with ball connection
A (mm): 120 D (mm): 150 Nominal size: DN120

Suction nozzle with ball connection and clamping ring suitable for the Italian system according to the listed nominal widths.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm

€30.90*
Variants from €23.90*
Item number 103053
Suction pipe with 45° elbow and cup, Italian system
Length (m): 3 Nominal size: DN120

​The suction pipe has a 45° bend with a welded cup and locking levers. The sealing ring is already pre-installed in the cup. The handle makes the slurry pipe easy to handle. The pipe end is bevelled to ensure optimum suction performance.The suction pipes are supplied in a galvanised version.

€179.00*
Variants from €149.00*
Item number 103080
Suction pipe with ball and 45° bend
D (mm): 150 Length (m): 3 Nominal size: DN120

Suction tube with ball and 45° bend with handle. Galvanized version, pipe end cut off at an angle.

€179.00*
Item number 53352
Suction pipe with grooves for hose connection
Length (m): 2 Nominal size: DN120 Ø A (mm): 120

Galvanized, wall thickness 1.2 mm

€109.00*

Content: 2 m (€54.50 / 1 m)

Variants from €99.00*
Item number 53351
Suction tube with grooves
Length (m): 3 Nominal size: DN108 Ø A (mm): 108

€165.00*

Content: 3 m (€55.00 / 1 m)

Variants from €119.00*

Average rating of 5 out of 5 stars

Item number FA59787
simol Support base swivels 90�

with foldable fastening part

€189.90*

Average rating of 4.9 out of 5 stars

Item number FA56095
simol Support foot with three-stage crank 1500kg

with additional adjustment range (H), height (retracted) 630 mm

€129.90*

Average rating of 4.7 out of 5 stars

Item number FA15732
simol Support foot with three-stage crank 2500kg

with additional adjustment range (H), height (retracted) 680 mm

€179.90*

Average rating of 4.5 out of 5 stars

Item number FA38826
simol Support leg with crank 4000kg

Support load 4000kg, height 620-930mm

€128.90*
Item number FA124843
Frank Original Support plate �354mm instead of P�ttinger 348.65.010.0

Support plate (middle plate) suitable for Pttinger drum mower Eurocat. The backing plate is painted, hardened and tempered.

€95.90*
Item number FA113111
Support strip tank Steyr T80, T84, T86

€12.95*

Average rating of 4.9 out of 5 stars

Item number FA47640
Support wheel for car trailers

Automatic folding mechanism, galvanized, solid rubber wheel, without clamp holder, with mounting plate.

€88.50*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.