Agricultural machinery
All Products
With semi-automatic folding process, spring locking.
three-stage with additional adjustment range (H), 2 lifting speeds
Swath plate left for motorised mower with outer shoe. The swath plate is supplied complete with the fastening material.Suitable for Agria, ESM, Köppl and Nussmüller Rasant finger bars.
Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.
Swath plate right for motorised mower with outer shoe. The swath plate is supplied complete with the fastening material.Suitable for Agria, ESM, Köppl and Nussmüller Rasant finger bars.
Suitable for Bema, Binderberger, Saphir, Tuchel and many other sweepers. Trim: 0.7 / 1.7x3 = mixed trim e.g. with corrugated wire 0.7mm and polypropylene 1.7x3mm.
Suitable for Bema, Binderberger, Saphir, Tuchel and many other sweepers. Trim: PPN 1.7x3 = polypropylene trim with fiber thickness 1.7x3mm.
Swing bolt complete for Busatis/ESM double knife mowers with horizontal swing arm drive.The swing bolt is screwed onto the rocker arms. By connecting the bearing housings to the drive, the rocker arms are moved forwards and backwards. This results in the upper knife moving in opposite directions to the lower knife and this ensures a clean cut.
with switch lighting when used with order no. 21735
with switch lighting when used with order no. 21735
with switch lighting when used with order no. 21735
Version with 4 switching positions ~
with switch lighting when used with order no. 21735
The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function
The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function
Unser Produktleiter
Werner Meixner
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
