Agricultural machinery

Tine holder M12x60 with adjusting screw suitable for Deutz-Fahr, Kverneland, Pttinger, PZ-Zweegers and Taarup.Clamping piece length 66mm, width 45.5mm

Tine holder complete suitable for Krone 265061.0, screw M12x85mm complete with lock nut, washer, fastening clamp and pressure piece.

For all rotary hay and rake tines with tine spacing of 90 - 96mm. Delivered in a package of 4 pieces.

Until built in 1972

Rotary hay tine suitable for Krone Kreiselhayer series KW. The tines are made in Germany and the quality corresponds to that of the original equipment.

With automatic safety, 32 mm pick-up capacity, bolt 18 mm, L = 250 mm, W = 40 mm.

ideal for assembling and dismantling rubber tires in conjunction with steel, light alloy and plastic rims preferably used for assembly on cars and motorcyclesEasy to apply to the tire bead with a brush or spongeoptimal gliding properties combined with rubber care effectventilates quickly and thus guarantees a short-term, non-positive connection of the structural componentsalso suitable for wide tiresDelivered in a 5kg bucketAreas of application:Cars, vans and motorcycles

​Quick Sealing of Puncture Damage – Reliable and Directly on the Mounted TireThis repair compound is ideal for quickly sealing minor puncture damage – without removing the tire.Suitable for:Truck bias-ply tires up to 8 mm damageTractor and earthmover tires up to 15 mm damageAlso suitable for tubeless radial earthmover tires up to 40 km/h, in combination with a carbide cutter to remove the steel wire from the puncture channelScope of delivery:10 x Sealing elements2 x CEMENT SC-BL 40 g cans1 x Insertion awl for earthmover tires1 x Rasp Ø 6.5 m

Flat tire on the tire and the tread is still great?Trust in the 40-piece tire repair set and repair tire damage up to 6mm yourself, quickly and cost-effectively. Also great to use as a breakdown kit for the trunk. Here you get the safe, better and lasting alternative to rubber and tire sealant - repairsPlay it safe!.Suitable for all tubeless tires (except truck and tractor tires).Contents: 30 self-vulcanization strips, sealing lubricant , T-handle with 2 awls and counterholder, T-handle with spiral insert for preparing the damaged area, 5 valve inserts, 6-point wrench for changing the awls and the spiral insertProcedure for repair Locate damage, foreign body (screw, nail, etc. etc.) unscrew/pull out. Dip the spiral insert into the lubricant, clean the damage hole and thus smooth the wall at the same time, Insert the vulcanization strip into the awl, dip it in the grease and press it into the prepared damage hole until the two The ends of the strip still stick out about 2 cm. While holding the counter, slowly pull the awl out again. Cut off the ends. Done.Don't forget: refill with air

Special grassland tire, particularly durable with good lateral stability, for trailers in agricultural forestry,...

12 V/20 A, 24 V/15 A, 250 V/10 A, 3 flat plugs, installation opening 12.5 mm, sheet metal thickness max. 5 mm.Switching position: 1-0 -2, on/off/on latching

12 V/20 A, 24 V/15 A, 250 V/10 A, 3 flat plugs, installation opening 12.5 mm, sheet metal thickness max. 5 mm. Switch position: 1-0-2 on/off/on momentary, spring return

12/24 V - 120 W for wall thickness up to 6 mm, 2 flat plugs, switching position: 0-1.

With fastening nut, for wall thickness up to 2 mm, 3 screw connections, switching position: 1-0-2.

Installation dimensions (L x W x H) = 44 x 22 x 46 mmfor differential lock, power shift, all-wheel drive, blower, windshield wiper 80, 900, 9000, 9100, CVT series

Installation dimensions (L x W x H) = 44 x 22 x 46 mmfor heating disc, rotating beacon, heating mirror with covered bulb, 9000, 9100 series

415x120x130 mm, robust steel design, painted, lockable, can be used anywhere, mounting holes (for fixed attachment) on the back.