Agricultural machinery

Version: external insertion

Suitable for curved axle at the frontThread: 11/16" UNFCone: 14.5 - 16mmLength: 110mm

Rear tie rod endThread: 11/16" Cone 17.0 - 19.3mm

Outer diameter 14.8mmTotal length: 224mmCone: 14.5 - 16mm

For standard front loader tines and large bale tines with M22 thread, FAIE order no. 9437, 18614, 17706, 18597. Max. load 400 kg at a distance of 1000 mm from the frame. The tine carrier is suitable for fork carriers with ISO-2 / FEM-2 (oblique guidance of the fork tines) hanging dimensions. The height of the fork carriage is 407mm.

For heavy-duty tines with M28 thread, FAIE No. 15062, 7275, 7277, 18596. Max. load 500 kg at a distance of 1000 mm from the frame. The tine carrier is suitable for fork carriers with ISO-2 / FEM-2 (oblique guidance of the fork tines) hanging dimensions. The height of the fork carriage is 407mm.

Suitable for Krone loading wagons from 1986, Titan series from 1990, presses Round/Vario/Combipack

Top quality harrow tines suitable for Lely and Lemken power harrows.

Tine for Tonutti wheel turner, new, short version. Thickness 7mm

MKW 10.01.121 + MKW 10.01.099.

Tine holder complete with screw M12x60. Original spare part number 585.038.00 can be used instead of Kuhn

Tine holder suitable for all Fella tinesConsisting of screw M12x75, clamping piece angle and clamping piece for the tine carrier tube.

To tines 436.143, 436.145, 203.70.081.3 K

Tine holder complete with clamping piece, screw with nut and washersSuitable for Pttinger hay caterpillars KR 200 and KR 220

Tine holder completely matching the crown "new version" with eccentric. The tine holder is supplied complete with pipe support, mounting bracket, eccentric (new version), lock nut and the M12x80 screws.

Tine holder for Kreiselheuer Fahr-Alt with red and white tines

With pipe support 575.021.00, M12x70.

With flat support 585.257.01, M12x70.

Tine holder M12x50 suitable for Deutz-Fahr and Pttinger. Consisting of screw M12x50, washer, clamping piece and lock nut.

Tine holder M12x50 with adjusting screw suitable for Deutz-Fahr, Kverneland, Pttinger, PZ-Zweegers and Taarup.Clamping piece length 61mm, width 40mm