Agricultural machinery

The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications< /li>

The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation.  ~The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm.Compact and light< li>High-quality workmanshipHigh torqueLong service lifeUniversal applications

The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. ~ ~The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications < /ul>

The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation. ~ ~ The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm.Compact and lightweightHigh-quality workmanshipHigh torqueLong service lifeUniversal applications

The 2020 angular gearbox is a compact gearbox designed for heavy-duty use. The gearbox has a transmission ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is reversed or the same as the direction of rotation of the input shaft (looking at the visible shaft end). The angular gearbox is equipped with a robust cast housing, a 1 3/8 x 6 PTO profile at the input and an output shaft with a diameter of 25 mm (order no. 65792) and 30 mm (order no. 59917). The gearbox can absorb torque peaks of up to 2 times the nominal torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox.  The maximum power transmission is 9kW at 540rpm and 14kW at 1000rpm.Compact and robustHigh-quality workmanshipHigh torqueLong service lifeUniversal applications

Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 37 kW (50 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Best quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,46Max. power (540 rpm)        approx. 37 kW / 50 hpMax. output torque    up to 446 Nm (at 540 rpm)Material                    High-quality grey cast ironApplication                Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.

On vertical surfaces.

Galvanized, screw-onM10, A=35mm

Galvanized, screw-on, M8A=30, B=M8, C=16 mm

With integrated fuse. It can't open on its own. For tipper bodies and car trailers, galvanized (without eyelet).

3-hole mounting flange with O-ring and screws.

4-hole mounting flange with O-ring and screws.

Passend für 4 Zylinder Perkins Motor

rechts und links verwendbarpassend zu Pflugkörper B, C, BS40, BS42, US35, US40

Anti-slip mats improve the coefficient of sliding friction, increase safety and improve stability, and they also require less lashing equipment.

Anti-slip mats improve the coefficient of sliding friction, increase safety and improve stability, and they also require less lashing equipment.

The anti-twist device for the field rail is screwed to the field rail together with the field rail bolt. The top link is then connected to the anti-twist device. This prevents the tiller rail from rotating and lifting when towing a trailer. The top link mount can be selected for Cat.1 and Cat.2 using a stepped bolt (no StVZO approval)

Plant protection sprayers must be well protected from frost so that they can be used immediately and remain strong in performance next season. Proper spray winterization preserves the lifespan and value of your expensive machine.The timing of winterization depends on the last field treatment of a crop. This varies greatly from farm to farm and is related to the crop rotation of the farm. However, winterization should take place before the first minus temperatures to prevent damage to the sprayer caused by frost. If you can store your crop protection sprayer in a frost-proof place, you don't need to protect it against sub-zero temperatures. Thorough cleaning and maintenance is sufficient here.Here are a few tips!When carrying out maintenance and cleaning, follow the operating instructions for your sprayerOnly use high-quality antifreeze! These do not form foam, have a preservative effect on plastic and rubber parts and prevent deposits and corrosionHigh-quality concentrates can also be reused next winter!Use concentrates because the When cleaning, water always remains in the syringe and diluted ready-made solutions are diluted even further.Approximately 20 liters of antifreeze concentrate are sufficient for one mounted syringe. For a self-propelled vehicle it can be up to 60 liters.For more detailed information about the amount of concentrate, please refer to the instructions for use from the respective manufacturer.It is particularly important that all of those parts are passed through which spray liquid will come into contact with the antifreeze concentrate.Special antifreeze and corrosion protection for field sprayers for dilution. Protects the nozzles and seals. 50% concentrate up to -37C, 40% concentrate up to -25C and 30% concentrate up to -15C.Color redContents: 5L

Prevents the compressed air brake systems from freezing in winter, protects against corrosion and thereby improves the lubrication of the valves.Technical information: Frost protection for the compressed air brake system

Version: Left

Suitable as a suction and pressure hose. Lightweight, highly flexible PVC hose with a shockproof spiral made of hard PVC and a smooth inner surface. The hose is primarily used as a liquid manure hose, wastewater drainage and in irrigation systems. Can be used in temperature ranges from -25C to +55C. Vacuum load up to 0.9bar.

Armrest 65 x 270 mmGrammer No: 1167905