Agricultural machinery

Piston rod 90 mm, internal thread M36x4, bore bolt 30.2 mm, connection R1/2?IG.For subsequent installation or for cost-effective repairs. These articulated cylinders are installed using the spindle halves already present in the loading wagon.

For subsequent installation or for cost-effective repairs. These articulated cylinders are installed with the spindle halves already present in the loading wagon.Piston rod 60 mm, internal thread M24x3, bore bolt 25.25 mm, connection M14x1.5 ITPlease note when ordering the design of the cylinders in left and right!The photo shows an articulated drawbar cylinder on the left.

Holder for top link (joint block)

Flexible tractor/tractor front tire for fields and road transport, robust shoulder area, excellent tracking, good rolling behavior characterize this tire, also suitable for planting and seeding machines.

Aluminum oil air cooler in panel construction. Max. operating pressure 26 bar, protection class IP44.Application: hay cranes, stationary small units

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Folding pins, spring pins and split pins in common sizes sorted in a practical PVC box.

for hydraulic device operation with 1 cylinder to the quick-change frame. The mounting kit is delivered pre-cut in a piece of sheet metal (962x150 mm). For assembly, only the remaining webs are cut through so that the individual parts can be welded. Sheet thickness 15 mm. Delivery corresponds to the parts colored red.

For mounting on the holder attached to the side of the vehicle or for welding, 24 mm, approx. 100 mm long. With built-in socket and rubber stopper.

Aufkleber Steyr Turbo.Abmessungen: 335 x 75 mm

Innendurchmesser(d) 75mmAußendurchmesser(D) 140mmHöhe(H) 43mm

54 mm Agraset 122suitable for size 2100, 2200, 2300, 2400, 2280, 2380, 2480, 1 3/8 6-piece, 1 3/8 21-piece

External thread (G): M20 x 1.5RExternal thread 2 (G2): M18x1.5L

External thread M20.x.1.5.RExternal thread 2 (G2) M18.x.1.5.R

Length: 190mm, outer diameter: 50mm, thread on cylinder side: M20x1.5R, thread on ball joint side: M22x1.5R, suitable for ZF axle APL 325 and APL 335

Length: 212mm