Agricultural machinery

Outer diameter: 130 mmPipe connection: 24 mmDesign: right

Asymmetrical light with marker light, housing and glass frame made of impact-resistant black plastic, LxHxD: 182x105x102mm, light emission: 140x73mm, glass lens, (without lamp).

complete with housing and screw set, : 140mm ~

complete with housing and screw set, : 140mm ~

Suitable for Case and Steyr 1-34-672-050with 3 fastening screws, screw spacing: 130mm WxHxD: 165x107x110mm(with bulbs)

Especially for Lindner, Same, Reform, Cobo no. C05.161, 12 V, ~ asymmetrical, WxHxD: 140x140x112 mm.

Especially for Lindner, Same, Reform. 12 V asymmetrical, Cobo no. C05.161, WxHxD: 140x140x112 mm.

Headliner for Steyr cab RS1 and RS2

​Steyr headliner suitable for high-roof models, with cutout for the passenger seatHeight: 5 cm

​Steyr headliner suitable for low roof version, with cutout for passenger seatHeight: 3 cm

with a cutout for the roof hatch

Faux leather, red

Wärmeschutzhülse für Einspritzdüse von Steyr Plus Serie

​Replacement mirror for Mekra mirror 511036023099, 511036024099, 47826941, 47904843, 12-volt heated, suitable for: Case IH: Magnum 400 Stage V, Optum 270, Puma Stage V: 185, 200, 220,       New Holland: T7 Stage V: 230, 245, 260,                              T7 Autocommand Stage V: 230, 245, 260, 290, 300, 315, 340      Steyr: 6185 Absolut CVT Stage V, 6165 Impuls CVT Stage V,               John Deere: 6r: 6230R, 6250R                   Claas Arion Series 500 and 600          Reference number:Claas: 11617730CNH: 48025195Jahn Deere: AL225823Mekra: 15 1036 010, 191036007099Width 202 mm, length 299 mm, curvature radius 1.2 m, thickness 24 mm, 

318x186 mm, 12V, black plastic housing, clamp holder for rod 14-20 mm.

12V/34W, plugs into the cigarette lighter, with built-in thermostat, including overheating protectionfor pleasant warmth and more seating comfort

Flange dimensions: 351 x 136 mmfor SK2 cabin

Heating hose I: 13mm, 5 meter roll ~

60x25 mm, radius 300 mm.

The front loader tines we offer for sale are made from spring steel and hardened to 43–49 HRC. The specified hardness corresponds to a tensile strength of 1320–1680 N/mm².Unless expressly stated otherwise, the tines on offer are not original spare parts, but high-quality products manufactured in the EU.The original part numbers provided are for identification purposes only, to ensure compatibility with the equivalent machines.

​A new product has been added to the Vivoil product range: the HI-LO double pump. HI stands for high pressure, LO for low pressure. The HI-LO pump is essentially a double pump in which the primary pump operates at high pressure with a low flow rate, while the secondary pump delivers a high flow rate at low pressure. Below a certain pressure (decoupling pressure), the flow rate corresponds to the sum of the flow rates of the front and rear stages. Above the decoupling pressure, the rear stage operates in a closed circuit and does not deliver any flow rate. Under these conditions, only the front stage operates, whose flow rate is determined exclusively by its displacement volume, as it reaches the maximum pressure required for the application.One of the most common applications for these pumps is in presses or wood splitters. The HI-LO VIVOIL pump is essentially a double pump, with the first pump generating the high pressure and the second pump delivering the low-pressure volume flow in addition to the volume flow of the high-pressure pump for fast movements. Below a certain pressure, the cut-off pressure set by the pressure relief valve, the volume flow delivered by the double pump corresponds to the sum of the volume flows of the two pump stages. The HI-LO pump also offers many individual customisation options. Ask us about the numerous customisation options available.

Dust and water protected, especially suitable for tractors and construction machinery, flat connectors 6.3 mm, load 12 V, 20 A, max. 380 W, 5-pin