Skip to main content Skip to search Skip to main navigation

Agricultural machinery


Skip product gallery

Our offer

Item number 21294
Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,295.00*
Discount -24 %
Item number FA117928
Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

Average rating of 5 out of 5 stars

Item number 2549
Cooking tines without a share

Tine material 25x8.

€8.79*
Discount -13 %
Item number FA54554
Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
Discount -26 %
Item number FA107995
Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

€1.69* €2.29* (26.2% saved)
Discount -40 %
Item number FA63556
Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
Discount -5 %
Item number FA2521
Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
Discount -10 %
Item number FA2531
Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
Item number 72983
Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
Discount -31 %
Item number 47888
Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

All Products

Discount -9 %
Item number FA152
SAUGUT High performance multi-purpose grease

Grease cartridge filled with 400g of high-quality universal grease. High flexing stability, water resistance and good corrosion behavior. Ideal for the lubrication of plain and rolling bearings in machines, apparatus and vehicles. Smooth, quick texture, temperature range -30C - +120C, lithium saponified, dropping point 190C.

€4.50* €4.95* (9.09% saved)

Content: 0.4 kg (€11.25 / 1 kg)

Average rating of 5 out of 5 stars

Item number FA36940
SAUGUT High-performance multi-purpose grease, set of 12

FAIE economy set with 12 cartridges, filled with 400g high-quality universal grease. High flexing stability, water resistance and good corrosion behavior. Ideal for the lubrication of plain and rolling bearings in machines, apparatus and vehicles. Smooth, quick texture, temperature range -30C - +120C, lithium saponified, dropping point 190C. Ideal price-performance ratio in a value pack.

€47.90*

Content: 4.8 kg (€9.98 / 1 kg)

Average rating of 5 out of 5 stars

Item number FA24785
hinge

Suitable for Steyr 80 series, 900 series, Case C42-C70, CS48-CS75.

€14.50*
Item number FA50909
Hinge bearing galvanized

Hinge bearing for sliding block, 16.5mm

€10.30*
Item number 68857
Hinge bolts
Length (mm): 105 Ø bolt (mm): 15

€2.90*
Variants from €2.40*
Item number FA24759
Hinge bolts

Suitable for Case, Steyr and New Holland

€22.95*
Item number FA99394
Hinge bonnet Steyr

Hinge for the hood

€12.95*
Item number FA99393
Hinge bonnet Steyr

Hinge for the hood

€12.95*
Item number FA24758
Hinge half/rear window

Suitable for Case, Steyr and New Holland

€24.95*

Average rating of 5 out of 5 stars

Item number FA24750
Hinge, plastic

Suitable for Case and Steyr

€14.20*
Item number FA24755
Hinge/rear window

Suitable for Case, Steyr and New Holland

€44.95*
Item number FA7740
Hoe cover

€41.90*
Item number FA7997
Hoeing harrow tine �7mm suitable for Einb�ck

Harrow tine 7x510mm suitable for Einbck hacking harrow.

From €3.31*
Item number FA115237
Hoeing harrow tine �8mm suitable for Einb�ck

Harrow tine 8x510mm suitable for Einbck hacking harrow.

€4.65*
Item number FA2949
Hoeing harrow tine suitable for Hatzenbichler

€3.59*
Item number 34282
Hoeing harrow tine suitable for Hatzenbichler
can be used instead of Hatzenbichler: 9310 Ø: 8

€4.49*
Variants from €3.99*
Item number 8107
Hoeing machine share angle of inclination 30�
Width (mm): 160

standardized according to DIN, LA=16 mm

€17.90*
Variants from €15.90*
Item number 2307
Hoeing machine share with an angle of inclination of 35�
Width (mm): 120

suitable for Rau, Einbck, LA=17 mm

€16.90*
Item number FA24734
holder

Suitable for Case and Steyr

€26.95*
Item number FA24741
holder

Suitable for Case and Steyr

€12.95*
Item number FA5053
Holder 40,880,000

€9.49*

Average rating of 4.75 out of 5 stars

Item number 106524
Holder for cooking and cultivating harrow tines
Frame material: 50 x 30 Tine material: 32 x 12

€12.50*
Variants from €1.99*
Item number FA104937
Holder for diesel igniter Steyr T80

Suitable for Steyr T80

€59.00*
Item number FA10943
ESM Holder for knife guide arm, bar back 12 mm

Suitable for BUSATIS mower Bidux 1205

€38.00*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.